lkml.org 
[lkml]   [2015]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 19/32] staging: comedi: das08: add DAS08JR_AO_UPDATE_REG
Date
"JR" boards with analog output channels have a jumper that controls
whether analog output channels are updated simultaneously or
individually. When set to update individually, individual channels are
updated when the high byte register is written. When set to update
simultaneously, channels are not updated until the digital inputs
register is read. The driver doesn't know how the jumper is set and is
not interested in the simultaneous output feature, so it updates a
channel by writing the low byte, then the high byte, then reading the
digital inputs register. To make the code more explicit, add a macro
`DAS08JR_AO_UPDATE_REG` with the same value as the `DAS08JR_DI_REG`
macro (for digital inputs) and use it when reading the register to
update the analog outputs.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
drivers/staging/comedi/drivers/das08.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 51637b1..4e8756a 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -101,6 +101,11 @@
#define DAS08JR_AO_LSB_REG(x) ((x) ? 0x06 : 0x04)
/* (W) analog output m.s.b. registers for 2 channels ("JR" boards) */
#define DAS08JR_AO_MSB_REG(x) ((x) ? 0x07 : 0x05)
+/*
+ * (R) update analog outputs ("JR" boards set for simultaneous output)
+ * (same register as digital inputs)
+ */
+#define DAS08JR_AO_UPDATE_REG 0x03

/*
cio-das08_aox.pdf
@@ -358,7 +363,7 @@ static void das08_ao_set_data(struct comedi_device *dev,
outb(lsb, dev->iobase + DAS08JR_AO_LSB_REG(chan));
outb(msb, dev->iobase + DAS08JR_AO_MSB_REG(chan));
/* load DACs */
- inb(dev->iobase + DAS08JR_DI_REG);
+ inb(dev->iobase + DAS08JR_AO_UPDATE_REG);
} else {
outb(lsb, dev->iobase + DAS08AO_AO_LSB(chan));
outb(msb, dev->iobase + DAS08AO_AO_MSB(chan));
--
2.1.4


\
 
 \ /
  Last update: 2015-06-05 20:01    [W:0.668 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site