lkml.org 
[lkml]   [2015]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/9] input: goodix: fix alignment issues
Date


> -----Original Message-----
> From: Dmitry Torokhov [mailto:dmitry.torokhov@gmail.com]
> Sent: 05 June, 2015 19:49
> To: Tirdea, Irina
> Cc: Bastien Nocera; linux-input@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 1/9] input: goodix: fix alignment issues
>
> Hi Irina,
>

Hi Dmitry,

Thanks for the review!

Will keep the good parts below and remove the bad ones.

Thanks,
Irina

> On Thu, May 28, 2015 at 03:47:37PM +0300, Irina Tirdea wrote:
> > Fix alignment to match open parenthesis detected by
> > running checkpatch.pl --strict.
>
> Mixed bag of changes here, but that's checkpatch for you.
>
> >
> > Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
> > ---
> > drivers/input/touchscreen/goodix.c | 17 +++++++++--------
> > 1 file changed, 9 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
> > index 0d93b1e..c2e785c 100644
> > --- a/drivers/input/touchscreen/goodix.c
> > +++ b/drivers/input/touchscreen/goodix.c
> > @@ -69,7 +69,7 @@ static const unsigned long goodix_irq_flags[] = {
> > * @len: length of the buffer to write
> > */
> > static int goodix_i2c_read(struct i2c_client *client,
> > - u16 reg, u8 *buf, int len)
> > + u16 reg, u8 *buf, int len)
> > {
> > struct i2c_msg msgs[2];
> > u16 wbuf = cpu_to_be16(reg);
> > @@ -78,7 +78,7 @@ static int goodix_i2c_read(struct i2c_client *client,
> > msgs[0].flags = 0;
> > msgs[0].addr = client->addr;
> > msgs[0].len = 2;
> > - msgs[0].buf = (u8 *) &wbuf;
> > + msgs[0].buf = (u8 *)&wbuf;
>
> Good.
>
> >
> > msgs[1].flags = I2C_M_RD;
> > msgs[1].addr = client->addr;
> > @@ -112,7 +112,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
> > data += 1 + GOODIX_CONTACT_SIZE;
> > error = goodix_i2c_read(ts->client,
> > GOODIX_READ_COOR_ADDR +
> > - 1 + GOODIX_CONTACT_SIZE,
> > + 1 + GOODIX_CONTACT_SIZE,
>
> Bad - makes 1 + GOODIX_CONTACT_SIZE look like extra argument, not
> continuation of expression.
>
>
> > data,
> > GOODIX_CONTACT_SIZE * (touch_num - 1));
> > if (error)
> > @@ -157,7 +157,8 @@ static void goodix_process_events(struct goodix_ts_data *ts)
> >
> > for (i = 0; i < touch_num; i++)
> > goodix_ts_report_touch(ts,
> > - &point_data[1 + GOODIX_CONTACT_SIZE * i]);
> > + &point_data[1 +
> > + GOODIX_CONTACT_SIZE * i]);
>
> No, this is plain ugly.
>
> >
> > input_mt_sync_frame(ts->input_dev);
> > input_sync(ts->input_dev);
> > @@ -199,8 +200,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
> > int error;
> >
> > error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA,
> > - config,
> > - GOODIX_CONFIG_MAX_LENGTH);
> > + config,
> > + GOODIX_CONFIG_MAX_LENGTH);
>
> Good.
>
> > if (error) {
> > dev_warn(&ts->client->dev,
> > "Error reading config (%d), using defaults\n",
> > @@ -297,9 +298,9 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
> > BIT_MASK(EV_ABS);
> >
> > input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0,
> > - ts->abs_x_max, 0, 0);
> > + ts->abs_x_max, 0, 0);
>
> Good.
>
> > input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0,
> > - ts->abs_y_max, 0, 0);
> > + ts->abs_y_max, 0, 0);
>
> Good.
>
> > input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
> > input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
> >
> > --
> > 1.9.1
> >
>
> Thanks.
>
> --
> Dmitry


\
 
 \ /
  Last update: 2015-06-05 19:21    [W:0.082 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site