lkml.org 
[lkml]   [2015]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[LINUX RFC V2 1/2] devicetree: Add DT bindings documentation for Zynq Ultrascale+ MPSoC GQSPI controller
Date
Add bindings documentation for GQSPI controller driver used by
Zynq Ultrascale+ MPSoC

Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xilinx.com>
---
No changes in v2
---
.../devicetree/bindings/spi/spi-zynqmp-qspi.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
new file mode 100644
index 0000000..cec6330
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt
@@ -0,0 +1,26 @@
+Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings
+-------------------------------------------------------------------
+
+Required properties:
+- compatible : Should be "xlnx,zynqmp-qspi-1.0".
+- reg : Physical base address and size of GQSPI registers map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- interrupt-parent : Must be core interrupt controller.
+- clock-names : List of input clock names - "ref_clk", "pclk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs : Number of chip selects used.
+
+Example:
+ qspi: spi@ff0f0000 {
+ compatible = "xlnx,zynqmp-qspi-1.0";
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ interrupts = <0 15 4>;
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;
+ };
--
2.1.2


\
 
 \ /
  Last update: 2015-06-05 15:21    [W:0.127 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site