lkml.org 
[lkml]   [2015]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 16/17] libnvdimm: Add sysfs numa_node to NVDIMM devices
From
On Thu, Jun 25, 2015 at 7:21 PM, Toshi Kani <toshi.kani@hp.com> wrote:
> On Thu, 2015-06-25 at 05:37 -0400, Dan Williams wrote:
>> From: Toshi Kani <toshi.kani@hp.com>
>>
>> Add support of sysfs 'numa_node' to I/O-related NVDIMM devices
>> under /sys/bus/nd/devices, regionN, namespaceN.0, and bttN.
>> When bttN is not set up, its numa_node returns -1 (NUMA_NO_NODE).
>>
>> An example of numa_node values on a 2-socket system with a single
>> NVDIMM range on each socket is shown below.
>> /sys/bus/nd/devices
>> |-- btt0/numa_node:-1
>> |-- btt1/numa_node:0
>> |-- namespace0.0/numa_node:0
>> |-- namespace1.0/numa_node:1
>> |-- region0/numa_node:0
>> |-- region1/numa_node:1
>>
>> These numa_node files are then linked under the block class of
>> their device names.
>> /sys/class/block/pmem0/device/numa_node:0
>> /sys/class/block/pmem0s/device/numa_node:0
>> /sys/class/block/pmem1/device/numa_node:1
>>
>> This enables numactl(8) to accept 'block:' and 'file:' paths of
>> pmem and btt devices as shown in the examples below.
>> numactl --preferred block:pmem0 --show
>> numactl --preferred file:/dev/pmem0s --show
>>
>> Signed-off-by: Toshi Kani <toshi.kani@hp.com>
>> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> Can you please update the commit log with the following? It reflects
> the changes in sysfs btt files.

Done, thanks!


\
 
 \ /
  Last update: 2015-06-26 17:41    [W:0.060 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site