lkml.org 
[lkml]   [2015]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] x86/mm/pat, drivers/infiniband/ipath: replace WARN() with pr_warn()

* Luis R. Rodriguez <mcgrof@suse.com> wrote:

> On Thu, Jun 25, 2015 at 08:49:22AM +0200, Ingo Molnar wrote:
> >
> > * Luis R. Rodriguez <mcgrof@do-not-panic.com> wrote:
> >
> > > From: "Luis R. Rodriguez" <mcgrof@suse.com>
> > >
> > > WARN() may confuse users, fix that. ipath_init_one() is part the
> > > device's probe so this would only be triggered if a corresponding
> > > device was found.
> > >
> > > Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
> > > ---
> > > drivers/infiniband/hw/ipath/ipath_driver.c | 6 ++++--
> > > 1 file changed, 4 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
> > > index 2d7e503..871dbe5 100644
> > > --- a/drivers/infiniband/hw/ipath/ipath_driver.c
> > > +++ b/drivers/infiniband/hw/ipath/ipath_driver.c
> > > @@ -31,6 +31,8 @@
> > > * SOFTWARE.
> > > */
> > >
> > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > > +
> > > #include <linux/sched.h>
> > > #include <linux/spinlock.h>
> > > #include <linux/idr.h>
> > > @@ -399,8 +401,8 @@ static int ipath_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> > > u32 bar0 = 0, bar1 = 0;
> > >
> > > #ifdef CONFIG_X86_64
> > > - if (WARN(pat_enabled(),
> > > - "ipath needs PAT disabled, boot with nopat kernel parameter\n")) {
> > > + if (pat_enabled()) {
> > > + pr_warn("ipath needs PAT disabled, boot with nopat kernel parameter\n");
> > > ret = -ENODEV;
> > > goto bail;
> > > }
> >
> > So driver init will always fail with this on modern kernels.
>
> Nope, I double checked this, ipath_init_one() is the PCI probe routine,
> not the module init call. It should probably be renamed.
>
> > Btw., on a second thought, ipath uses MTRRs to enable WC:
> >
> > ret = ipath_enable_wc(dd);
> > if (ret)
> > ret = 0;
> >
> > Note how it ignores any failures - the driver still works even if WC was not
> > enabled.
>
> Ah, well WC strategy requires a split of the MMIO registers and the desired
> WC area, right now they are combined for some type of ipath devices. There
> are two things to consider when thinking about whether or not we want to
> do the work required to do the split:

But ... why doing the 'split'?

With my suggested approach the driver will behave in two ways:

- if booted with 'nopat' it will behave as always and have the WC MTRR entries
added

- if booted with a modern kernel without 'nopat' then instead of getting WC MTRR
entries it will not get them - we'll fall back to UC. No 'split' or any other
change is needed to the driver AFAICS: it might be slower, but it will still
be functional. It will _not_ get PAT WC mappings - it will fall back to UC -
which is still much better for any potential user than not working at all.

Same suggestion for the other affected driver.

what am I missing?

Thanks,

Ingo


\
 
 \ /
  Last update: 2015-06-26 11:01    [W:0.052 / U:1.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site