lkml.org 
[lkml]   [2015]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH-v4 2/3] mfd: 88pm800: Set default interrupt clear method
On Thu, 25 Jun 2015, Vaibhav Hiremath wrote:

> As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe
> (page 0) controls the method of clearing interrupt
> status of 88pm800 family of devices;
>
> 0: clear on read
> 1: clear on write
>
> If pdata is not coming from board file, then set the
> default irq clear method to "irq clear on write"
>
> Also, as suggested by "Lee Jones" renaming variable field
> to appropriate name.
>
> Signed-off-by: Zhao Ye <zhaoy@marvell.com>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
> ---
> drivers/mfd/88pm800.c | 15 ++++++++++-----
> include/linux/mfd/88pm80x.h | 6 ++++--
> 2 files changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> index 40fd014..e0cd7ad 100644
> --- a/drivers/mfd/88pm800.c
> +++ b/drivers/mfd/88pm800.c
> @@ -376,7 +376,7 @@ static int device_irq_init_800(struct pm80x_chip *chip)
> {
> struct regmap *map = chip->regmap;
> unsigned long flags = IRQF_ONESHOT;
> - int data, mask, ret = -EINVAL;
> + int irq_clr_mode, mask, ret = -EINVAL;
>
> if (!map || !chip->irq) {
> dev_err(chip->dev, "incorrect parameters\n");
> @@ -384,15 +384,16 @@ static int device_irq_init_800(struct pm80x_chip *chip)
> }
>
> /*
> - * irq_mode defines the way of clearing interrupt. it's read-clear by
> - * default.
> + * irq_clr_on_wr defines the way of clearing interrupt by
> + * read/write(0/1). It's read-clear by default.
> */
> mask =
> PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
> PM800_WAKEUP2_INT_MASK;
>
> - data = PM800_WAKEUP2_INT_CLEAR;
> - ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
> + irq_clr_mode = (chip->irq_clr_on_wr) ?

Drop the brackets.

> + PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR;
> + ret = regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode);
>
> if (ret < 0)
> goto out;
> @@ -514,6 +515,7 @@ static int device_800_init(struct pm80x_chip *chip,
> }
>
> chip->regmap_irq_chip = &pm800_irq_chip;
> + chip->irq_clr_on_wr = pdata->irq_clr_on_wr;

You have protection around pdata everywhere else in the file, I
suggest you supply some here too.

> ret = device_irq_init_800(chip);
> if (ret < 0) {
> @@ -566,6 +568,9 @@ static int pm800_probe(struct i2c_client *client,
> pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> if (!pdata)
> return -ENOMEM;
> +
> + /* by default, set irq clear method on write */
> + pdata->irq_clr_on_wr = true;

You can save yourself some memory here, by removing this seemingly
pointless allocation and do this above:

chip->irq_clr_on_wr = pdata ? pdata->irq_clr_on_wr : true;

> }
>
> ret = pm80x_init(client);
> diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
> index 97cb283..94b3dcd 100644
> --- a/include/linux/mfd/88pm80x.h
> +++ b/include/linux/mfd/88pm80x.h
> @@ -77,6 +77,8 @@ enum {
> #define PM800_WAKEUP2 (0x0E)
> #define PM800_WAKEUP2_INV_INT (1 << 0)
> #define PM800_WAKEUP2_INT_CLEAR (1 << 1)
> +#define PM800_WAKEUP2_INT_READ_CLEAR (0 << 1)
> +#define PM800_WAKEUP2_INT_WRITE_CLEAR (1 << 1)
> #define PM800_WAKEUP2_INT_MASK (1 << 2)

Use the BIT() macro.

> #define PM800_POWER_UP_LOG (0x10)
> @@ -300,7 +302,7 @@ struct pm80x_chip {
> struct regmap_irq_chip_data *irq_data;
> int type;
> int irq;
> - int irq_mode;
> + int irq_clr_on_wr; /* '1': Clear on write, '0': Clear on read*/

Whitespace issue.

Shouldn't this be a bool?

Actually even better, I would define; CLR_ON_WRITE and CLR_ON_READ,
and call the variable irq_clear_method, or something.

Much clearer that way I think.

> unsigned long wu_flag;
> spinlock_t lock;
> };
> @@ -315,7 +317,7 @@ struct pm80x_platform_data {
> */
> struct regulator_init_data *regulators[PM800_ID_RG_MAX];
> unsigned int num_regulators;
> - int irq_mode; /* Clear interrupt by read/write(0/1) */
> + int irq_clr_on_wr; /* Clear interrupt by read/write(0/1) */
> int batt_det; /* enable/disable */
> int (*plat_config)(struct pm80x_chip *chip,
> struct pm80x_platform_data *pdata);

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-06-25 12:41    [W:0.133 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site