lkml.org 
[lkml]   [2015]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Gta04-owner] [PATCH 5/6] phy: twl4030-usb: add support for reading resistor on ID pin.
From
Date
Hi Neil,

Am 01.06.2015 um 23:37 schrieb NeilBrown <neilb@suse.de>:

> On Mon, 1 Jun 2015 19:06:52 +0530 Kishon Vijay Abraham I <kishon@ti.com>
> wrote:
>
>> Hi,
>>
>> On Thursday 16 April 2015 01:33 PM, NeilBrown wrote:
>>> From: NeilBrown <neilb@suse.de>
>>>
>>> The twl4030 phy can measure, with low precision, the
>>> resistance-to-ground of the ID pin.
>>>
>>> Add a function to read the value, and export the result
>>> via sysfs.
>>
>> Little sceptical about adding new sysfs entries. Do you have a good reason to
>> add this?
>
> The hardware can report the value, so why not present it to user-space?

I just had another idea how to present the value to user space.

The TWL6030 has connected the USB ID pin to one of the GPADC channels:

http://lxr.free-electrons.com/source/drivers/iio/adc/twl6030-gpadc.c#L235

And therefore automatically presents the ID pin voltage through iio.

Would it be possible and useful to provide an iio interface for the resistance-to-ground
of the tw4030 ID pin as well?

This would resemble a 6 or 7 level ADC with non-linear scale, but better than nothing.

And to avoid the “floating” issue, it could also present some voltage value (assuming
a defined current).

So that “floating” is reported as some maximum voltage (e.g. 3.3V) and “ground” as 0V.

What do you think?

BR,
Nikolaus

>
> I originally used this with a udev rule which would configure the maximum
> current based on the resistance measure - to work with the particular charger
> hardware I have.
>
> More recent patches try to do all of the max-current configuration in the
> kernel, so I could live without exporting the value via sysfs if that is a
> show-stopper.
>
> I can't see where the scepticism comes from though. It is a well defined
> and cleary documented feature of the hardware. Why not expose it?
>
> Thanks,
> NeilBrown
>
>
>>
>> Thanks
>> Kishon
>>>
>>> If the read fails, which it does sometimes, try again in 50msec.
>>>
>>> Acked-by: Pavel Machek <pavel@ucw.cz>
>>> Signed-off-by: NeilBrown <neilb@suse.de>
>>> ---
>>> .../ABI/testing/sysfs-platform-twl4030-usb | 22 +++++++
>>> drivers/phy/phy-twl4030-usb.c | 63 ++++++++++++++++++++
>>> 2 files changed, 85 insertions(+)
>>>
>>> diff --git a/Documentation/ABI/testing/sysfs-platform-twl4030-usb b/Documentation/ABI/testing/sysfs-platform-twl4030-usb
>>> index 512c51be64ae..425d23676f8a 100644
>>> --- a/Documentation/ABI/testing/sysfs-platform-twl4030-usb
>>> +++ b/Documentation/ABI/testing/sysfs-platform-twl4030-usb
>>> @@ -6,3 +6,25 @@ Description:
>>> Possible values: "on", "off".
>>>
>>> Changes are notified via select/poll.
>>> +
>>> +What: /sys/bus/platform/devices/*twl4030-usb/id
>>> +Description:
>>> + Read-only report on measurement of USB-OTG ID pin.
>>> +
>>> + The ID pin may be floating, grounded, or pulled to
>>> + ground by a resistor.
>>> +
>>> + A very course grained reading of the resistance is
>>> + available. The numbers given in kilo-ohms are roughly
>>> + the center-point of the detected range.
>>> +
>>> + Possible values are:
>>> + ground
>>> + 102k
>>> + 200k
>>> + 440k
>>> + floating
>>> + unknown
>>> +
>>> + "unknown" indicates a problem with trying to detect
>>> + the resistance.
>>> diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
>>> index 3a707dd14238..1d6f3e70193e 100644
>>> --- a/drivers/phy/phy-twl4030-usb.c
>>> +++ b/drivers/phy/phy-twl4030-usb.c
>>> @@ -379,6 +379,56 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
>>> }
>>> }
>>>
>>> +enum twl4030_id_status {
>>> + TWL4030_GROUND,
>>> + TWL4030_102K,
>>> + TWL4030_200K,
>>> + TWL4030_440K,
>>> + TWL4030_FLOATING,
>>> + TWL4030_ID_UNKNOWN,
>>> +};
>>> +static char *twl4030_id_names[] = {
>>> + "ground",
>>> + "102k",
>>> + "200k",
>>> + "440k",
>>> + "floating",
>>> + "unknown"
>>> +};
>>> +
>>> +enum twl4030_id_status twl4030_get_id(struct twl4030_usb *twl)
>>> +{
>>> + int ret;
>>> +
>>> + pm_runtime_get_sync(twl->dev);
>>> + if (twl->usb_mode == T2_USB_MODE_ULPI)
>>> + twl4030_i2c_access(twl, 1);
>>> + ret = twl4030_usb_read(twl, ULPI_OTG_CTRL);
>>> + if (ret < 0 || !(ret & ULPI_OTG_ID_PULLUP)) {
>>> + /* Need pull-up to read ID */
>>> + twl4030_usb_set_bits(twl, ULPI_OTG_CTRL,
>>> + ULPI_OTG_ID_PULLUP);
>>> + mdelay(50);
>>> + }
>>> + ret = twl4030_usb_read(twl, ID_STATUS);
>>> + if (ret < 0 || (ret & 0x1f) == 0) {
>>> + mdelay(50);
>>> + ret = twl4030_usb_read(twl, ID_STATUS);
>>> + }
>>> +
>>> + if (twl->usb_mode == T2_USB_MODE_ULPI)
>>> + twl4030_i2c_access(twl, 0);
>>> + pm_runtime_put_autosuspend(twl->dev);
>>> +
>>> + if (ret < 0)
>>> + return TWL4030_ID_UNKNOWN;
>>> + ret = ffs(ret) - 1;
>>> + if (ret < TWL4030_GROUND || ret > TWL4030_FLOATING)
>>> + return TWL4030_ID_UNKNOWN;
>>> +
>>> + return ret;
>>> +}
>>> +
>>> static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
>>> {
>>> u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
>>> @@ -532,6 +582,16 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
>>> }
>>> static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
>>>
>>> +static ssize_t twl4030_usb_id_show(struct device *dev,
>>> + struct device_attribute *attr,
>>> + char *buf)
>>> +{
>>> + struct twl4030_usb *twl = dev_get_drvdata(dev);
>>> + return scnprintf(buf, PAGE_SIZE, "%s\n",
>>> + twl4030_id_names[twl4030_get_id(twl)]);
>>> +}
>>> +static DEVICE_ATTR(id, 0444, twl4030_usb_id_show, NULL);
>>> +
>>> static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
>>> {
>>> struct twl4030_usb *twl = _twl;
>>> @@ -709,6 +769,8 @@ static int twl4030_usb_probe(struct platform_device *pdev)
>>> platform_set_drvdata(pdev, twl);
>>> if (device_create_file(&pdev->dev, &dev_attr_vbus))
>>> dev_warn(&pdev->dev, "could not create sysfs file\n");
>>> + if (device_create_file(&pdev->dev, &dev_attr_id))
>>> + dev_warn(&pdev->dev, "could not create sysfs file\n");
>>>
>>> ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
>>>
>>> @@ -753,6 +815,7 @@ static int twl4030_usb_remove(struct platform_device *pdev)
>>> pm_runtime_get_sync(twl->dev);
>>> cancel_delayed_work(&twl->id_workaround_work);
>>> device_remove_file(twl->dev, &dev_attr_vbus);
>>> + device_remove_file(twl->dev, &dev_attr_id);
>>>
>>> /* set transceiver mode to power on defaults */
>>> twl4030_usb_set_mode(twl, -1);
>>>
>>>
>
> _______________________________________________
> Gta04-owner mailing list
> Gta04-owner@goldelico.com
> http://lists.goldelico.com/mailman/listinfo.cgi/gta04-owner



\
 
 \ /
  Last update: 2015-06-23 11:21    [W:0.095 / U:15.952 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site