lkml.org 
[lkml]   [2015]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] serial: imx: reduce irq-latency after rx overflow
Date
Am Samstag, 20. Juni 2015, 19:25:52 schrieb Manfred Schlaegl:
> To prevent problems with interrupt latency, and due to the fact, that
> the error will be counted anyway (icount.overrun), the dev_err is simply
> removed.
>
> Background:
> If an rx-fifo overflow occurs a dev_err message was called in interrupt
> context. Since dev_err messages are written to console in a synchronous way
> (unbuffered), and console may be a serial terminal, this leads to a
> highly increased interrupt-latency (several milliseconds).
> As a result of the high latency more rx-fifo overflows will happen, and
> therefore a feedback loop of errors is created.

I understand your rationale but removing this error message from kernel log removes the possibility to detect serial overruns by simply check the kernel log or output on kernel console. AFAICS you have to use TIOCGICOUNT to get the error counters.
How about introducing a rate limit for this kernel message?

Best regards,
Alexander
--
Dipl.-Inf. Alexander Stein

SYS TEC electronic GmbH
Am Windrad 2
08468 Heinsdorfergrund
Tel.: 03765 38600-1156
Fax: 03765 38600-4100
Email: alexander.stein@systec-electronic.com
Website: www.systec-electronic.com

Managing Director: Dipl.-Phys. Siegmar Schmidt
Commercial registry: Amtsgericht Chemnitz, HRB 28082

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2015-06-22 09:21    [W:0.057 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site