lkml.org 
[lkml]   [2015]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 06/20] [SCSI] mpt3sas: Provides the physical location of sas drives
From
Date
>>>>> Sreekanth Reddy <sreekanth.reddy@avagotech.com> writes:

> This Patch will provide more details of the devices such as slot
> number, enclosure logical id, enclosure level & connector name in the
> following scenarios, - When end device is added in the topology, -
> When the end device is removed from the setup, - When the SCSI mid
> layer issues TASK ABORT/ DEVICE RESET/ TARGET RESET during error
> handling, - When any command to the device fails with Sense key
> Hardware error or Medium error or Unit Attention, - When firmware
> returns device error or device not ready status for the end device, -
> When a Predicted fault is detected on an end device.

> This information can be used by the user to identify the location of
> the desired drive in the topology.

> Driver will get these information by reading the sas device page0.

Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

--
Martin K. Petersen Oracle Linux Engineering
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2015-06-19 22:41    [W:0.044 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site