lkml.org 
[lkml]   [2015]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] pinctrl: qcom: spmi-mpp: Introduce defines for MODE_CTL
Date
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 6d9abeea810d..745c37dea7d0 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -85,6 +85,14 @@
#define PMIC_MPP_REG_AIN_ROUTE_SHIFT 0
#define PMIC_MPP_REG_AIN_ROUTE_MASK 0x7

+#define PMIC_MPP_MODE_DIGITAL_INPUT 0
+#define PMIC_MPP_MODE_DIGITAL_OUTPUT 1
+#define PMIC_MPP_MODE_DIGITAL_BIDIR 2
+#define PMIC_MPP_MODE_ANALOG_BIDIR 3
+#define PMIC_MPP_MODE_ANALOG_INPUT 4
+#define PMIC_MPP_MODE_ANALOG_OUTPUT 5
+#define PMIC_MPP_MODE_CURRENT_SINK 6
+
#define PMIC_MPP_PHYSICAL_OFFSET 1

/* Qualcomm specific pin configurations */
@@ -248,20 +256,20 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function,
pad->function = function;

if (!pad->analog_mode) {
- val = 0; /* just digital input */
+ val = PMIC_MPP_MODE_DIGITAL_INPUT;
if (pad->output_enabled) {
if (pad->input_enabled)
- val = 2; /* digital input and output */
+ val = PMIC_MPP_MODE_DIGITAL_BIDIR;
else
- val = 1; /* just digital output */
+ val = PMIC_MPP_MODE_DIGITAL_OUTPUT;
}
} else {
- val = 4; /* just analog input */
+ val = PMIC_MPP_MODE_ANALOG_INPUT;
if (pad->output_enabled) {
if (pad->input_enabled)
- val = 3; /* analog input and output */
+ val = PMIC_MPP_MODE_ANALOG_BIDIR;
else
- val = 5; /* just analog output */
+ val = PMIC_MPP_MODE_ANALOG_OUTPUT;
}
}

@@ -654,32 +662,32 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state,
dir &= PMIC_MPP_REG_MODE_DIR_MASK;

switch (dir) {
- case 0:
+ case PMIC_MPP_MODE_DIGITAL_INPUT:
pad->input_enabled = true;
pad->output_enabled = false;
pad->analog_mode = false;
break;
- case 1:
+ case PMIC_MPP_MODE_DIGITAL_OUTPUT:
pad->input_enabled = false;
pad->output_enabled = true;
pad->analog_mode = false;
break;
- case 2:
+ case PMIC_MPP_MODE_DIGITAL_BIDIR:
pad->input_enabled = true;
pad->output_enabled = true;
pad->analog_mode = false;
break;
- case 3:
+ case PMIC_MPP_MODE_ANALOG_BIDIR:
pad->input_enabled = true;
pad->output_enabled = true;
pad->analog_mode = true;
break;
- case 4:
+ case PMIC_MPP_MODE_ANALOG_INPUT:
pad->input_enabled = true;
pad->output_enabled = false;
pad->analog_mode = true;
break;
- case 5:
+ case PMIC_MPP_MODE_ANALOG_OUTPUT:
pad->input_enabled = false;
pad->output_enabled = true;
pad->analog_mode = true;
--
1.8.2.2


\
 
 \ /
  Last update: 2015-06-18 09:01    [W:0.246 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site