lkml.org 
[lkml]   [2015]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 06/11] nvmem: Add bindings for simple nvmem framework
On 05/21/2015 09:44 AM, Srinivas Kandagatla wrote:
> diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt
> new file mode 100644
> index 0000000..ecea654
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt
> @@ -0,0 +1,84 @@
> += NVMEM Data Device Tree Bindings =
> +
> +This binding is intended to represent the location of hardware
> +configuration data stored in NVMEMs.

It would be worthwhile spelling out what NVMEM stands for.

> +
> +On a significant proportion of boards, the manufacturer has stored
> +some data on NVMEM, for the OS to be able to retrieve these information
> +and act upon it. Obviously, the OS has to know about where to retrieve
> +these data from, and where they are stored on the storage device.
> +
> +This document is here to document this.
> +
> += Data providers =
> +Contains bindings specific to provider drivers and data cells as children
> +to this node.

children of this node?

> +
> +Optional properties:
> + read-only: Mark the provider as read only.
> +
> += Data cells =
> +These are the child nodes of the provider which contain data cell
> +information like offset and size in nvmem provider.
> +
> +Required properties:
> +reg: specifies the offset in byte within that storage device, start bit
> + in the byte and the length in bits of the data we care about.
> + There could be more then one offset-length pairs in this property.

s/then/than/

> +
> +Optional properties:
> +
> +bit-offset: specifies the offset in bit within the address range specified
> + by reg property. Can take values from 0-7.
> +nbits: specifies number of bits this cell occupies starting from bit-offset.
> +

Hopefully the consumer knows the endianness of the data stored.

> +For example:
> +
> + /* Provider */
> + qfprom: qfprom@00700000 {
> + ...
> +
> + /* Data cells */
> + tsens_calibration: calib@404 {
> + reg = <0x404 0x10>;
> + };
> +
> + tsens_calibration_bckp: calib_bckp@504 {
> + reg = <0x504 0x11>;
> + bit-offset = 6;
> + nbits = 128;
> + };
> +
> + pvs_version: pvs-version@6 {
> + reg = <0x6 0x2>
> + bit-offset = 7;
> + nbits = 2;
> + };
> +
> + speed_bin: speed-bin@c{
> + reg = <0xc 0x1>;
> + bit-offset = 2;
> + nbits = 3;
> +
> + };
> + ...
> + };
> +
> += Data consumers =
> +Are device nodes which consume nvmem data cells/providers.
> +
> +Required-properties:
> +nvmem-cell: list of phandle to the nvmem data cells.
> +nvmem-cell-names: names for the each nvmem-cell specified
> +
> +Optional-properties:
> +nvmem : list of phandles to nvmem providers.
> +nvmem-names: names for the each nvmem provider.

Is nvmem-names required if nvmem is used?

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project



\
 
 \ /
  Last update: 2015-06-17 01:01    [W:0.498 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site