lkml.org 
[lkml]   [2015]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] Input - synaptics: pin 3 touches when the firmware reports 3 fingers
On Apr 24 2015 or thereabouts, Benjamin Tissoires wrote:
> Hi Dmitry,
>
> [ adding more relevant people to the discussion ]
>
> On Apr 23 2015 or thereabouts, Benjamin Tissoires wrote:
> > On Apr 23 2015 or thereabouts, Dmitry Torokhov wrote:
> > > On Wed, Apr 22, 2015 at 11:45:09AM -0400, Benjamin Tissoires wrote:
> > > > Synaptics PS/2 touchpad can send only 2 touches in a report. They can
> > > > detect 4 or 5 and this information is valuable.
> > > >
> > > > In commit 63c4fda3c0bb ("Input: synaptics - allocate 3 slots to keep
> > > > stability in image sensors"), we allocate 3 slots, but we still continue
> > > > to report the 2 available fingers. That means that the client sees 2 used
> > > > slots while there is a total of 3 fingers advertised by BTN_TOOL_TRIPLETAP.
> > > >
> > > > For old kernels this is not a problem because max_slots was 2 and libinput/
> > > > xorg-synaptics knew how to deal with that. Now that max_slot is 3, the
> > > > clients ignore BTN_TOOL_TRIPLETAP and count the actual used slots (so 2).
> > > > It then gets confused when receiving the BTN_TOOL_TRIPLETAP and DOUBLETAP
> > > > information, and goes wild.
> > > >
> > > > We can pin the 3 slots until we get a total number of fingers below 2.
> > > >
> > > > Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1212230
> > >
> > > Benjamin, I do not quite like it. It seems that original patch was not
> > > quite right and we are adding more workarounds.
> >
> > Agree. And I am starting to hate more and more the synaptics PS/2 and all
> > the PS/2 drivers to be honest :) - trying to fit a heavy load data like
> > multitouch in a simple and lightweight protocol like PS/2 is insane...
> >
> > We are internally trying to figure out if we can finally take advantage
> > of the SMBus/RMI4 protocol, but we tried for one year without much
> > success.
> >
> > >
> > > Synaptics can only track 2 contacts, correct? Why 2 slots to track them
> > > is not enough?
> >
> > IIRC, the problem was that upon a third finger down, with only 2 slots,
> > the fingers were silently inverted in most cases. The thing is that the
> > firmware forwards 2 fingers, but not necessarily the two first. So you
> > generally get fingers 1+3 so the slot 2 needs to be removed. And that
> > means the kernel tracking has to track 3 fingers upon transitions.
> >
> > This may be completely bullshit and we might not need to use 3 slots at
> > all. I'll need to do further experiments to validate which one is best
> > then.
> >
> > I am perfectly fine holding this one up for a little bit more testings
> > and then we can decide which one needs to be done (revert or an other
> > band-aid).
> >
>
> So I carefully recorded each situation (initial with 2 slots, 2 slots
> and then with the pinning in this patch*), and I am now convinced that
> the pinning is the best sequence that we forward to the user space (best
> among the 3).
>
> With 2 slots declared, there are 2 problems:
> - the first finger jumps to the position of the 3rd when it lands
> - the transition between 2 to 3 fingers goes to a state where the kernel
> removes the second finger (while jumping the first to the position of
> the 3rd finger), send a sync and then reallocate the first finger
> position as the second slot in use
>
> -> that means that user space sees a small transition where the slots
> count is 1 while the BTN_TOOL advertise triple tap :/
>
> With 3 slots, we have the problem reported in the rhbz bug #1212230:
> - during the transition, the fingers are stable, but we have at most 2
> active slots in one frame, which confuses libinput/xorg-synaptics.
>
> With the pinning, the user space is no more confused because BTN_TOOL is
> always greater or equal than the active slots.
>
> So I think for now we have 3 possibilities:
> 1. Just carry this patch, and hope that we will be able to switch the
> synaptics device in the non-PS/2 mode
> 2. Revert to 2 patches and fix the kernel tracking to accept 3 fingers
> and return the 2 best matches
> 3. Revert the use of the kernel tracking at all and re-introduce the
> spaghetti code that was here before and hope that all cases where
> properly handled.
>
> IMO that the solution 2. is the best, but I can not do it because I
> don't understand what the code does. I can guess things but I can not
> accurately change it because it is not readable IMO.
>
> (yes, there is also the solution 4: "screw up and let the user space deal
> with it", but I'd rather not do that given the history of the multitouch
> protocol)

Dmitry, I feel like this discussion fell a little bit between the cracks
and that we all forgot about it.

I still believe that the patch is needed (even if it is not the best
solution), so I am sending a gently ping on this one :)

Cheers,
Benjamin


> * I tried to put side by side the 3 test cases in the following logs:
>
>
> (init slots 2, no pinning) | (init slots 3, no pinning) | (init slots 3, pinning)
> ----------------------------- | ----------------------------- | ---------------------------
> ------------------------------|----- one finger down -------|----------------------------
> | |
> ABS_MT_SLOT 0 | ABS_MT_SLOT 0 | ABS_MT_SLOT 0
> ABS_MT_TRACKING_ID 53 | ABS_MT_TRACKING_ID 53 | ABS_MT_TRACKING_ID 53
> ABS_MT_POSITION_X 2000 | ABS_MT_POSITION_X 2000 | ABS_MT_POSITION_X 2000
> ABS_MT_POSITION_Y 2000 | ABS_MT_POSITION_Y 2000 | ABS_MT_POSITION_Y 2000
> ABS_MT_PRESSURE 68 | ABS_MT_PRESSURE 68 | ABS_MT_PRESSURE 68
> BTN_TOUCH 1 | BTN_TOUCH 1 | BTN_TOUCH 1
> ABS_X 2000 | ABS_X 2000 | ABS_X 2000
> ABS_Y 2000 | ABS_Y 2000 | ABS_Y 2000
> ABS_PRESSURE 68 | ABS_PRESSURE 68 | ABS_PRESSURE 68
> BTN_TOOL_FINGER 1 | BTN_TOOL_FINGER 1 | BTN_TOOL_FINGER 1
> --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ----------
> | |
> ... | ... | ...
> | |
> ------------------------------------ second finger down ------------------------------------
> | |
> --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ----------
> ABS_MT_POSITION_X 2000 | ABS_MT_POSITION_X 2000 | ABS_MT_POSITION_X 2000
> ABS_MT_POSITION_Y 2000 | ABS_MT_POSITION_Y 2000 | ABS_MT_POSITION_Y 2000
> ABS_MT_PRESSURE 78 | ABS_MT_PRESSURE 78 | ABS_MT_PRESSURE 78
> ABS_MT_SLOT 1 | ABS_MT_SLOT 1 | ABS_MT_SLOT 1
> ABS_MT_TRACKING_ID 54 | ABS_MT_TRACKING_ID 54 | ABS_MT_TRACKING_ID 54
> ABS_MT_POSITION_X 3000 | ABS_MT_POSITION_X 3000 | ABS_MT_POSITION_X 3000
> ABS_MT_POSITION_Y 3000 | ABS_MT_POSITION_Y 3000 | ABS_MT_POSITION_Y 3000
> ABS_MT_PRESSURE 64 | ABS_MT_PRESSURE 64 | ABS_MT_PRESSURE 64
> ABS_X 2000 | ABS_X 2000 | ABS_X 2000
> ABS_Y 2000 | ABS_Y 2000 | ABS_Y 2000
> ABS_PRESSURE 78 | ABS_PRESSURE 78 | ABS_PRESSURE 78
> BTN_TOOL_FINGER 0 | BTN_TOOL_FINGER 0 | BTN_TOOL_FINGER 0
> BTN_TOOL_DOUBLETAP 1 | BTN_TOOL_DOUBLETAP 1 | BTN_TOOL_DOUBLETAP 1
> --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ----------
> | |
> ... | ... | ...
> | |
> ------------------------------------ third finger down ------------------------------------
> | |
> --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ----------
> ABS_MT_SLOT 0 | ABS_MT_SLOT 0 | ABS_MT_SLOT 0
> ABS_MT_POSITION_X 4000 | ABS_MT_POSITION_X 2000 | ABS_MT_POSITION_X 2000
> ABS_MT_POSITION_Y 4000 | ABS_MT_POSITION_Y 2000 | ABS_MT_POSITION_Y 2000
> ABS_MT_PRESSURE 78 | ABS_MT_PRESSURE 78 | ABS_MT_PRESSURE 78
> ABS_MT_SLOT 1 | ABS_MT_SLOT 2 | ABS_MT_SLOT 2
> ABS_MT_TRACKING_ID -1 | ABS_MT_TRACKING_ID 55 | ABS_MT_TRACKING_ID 55
> | ABS_MT_POSITION_X 4000 | ABS_MT_POSITION_X 4000
> | ABS_MT_POSITION_Y 4000 | ABS_MT_POSITION_Y 4000
> | ABS_MT_PRESSURE 72 | ABS_MT_PRESSURE 72
> | ABS_MT_SLOT 1 |
> | ABS_MT_TRACKING_ID -1 |
> ABS_X 4000 | ABS_X 2000 | ABS_X 2000
> ABS_Y 4000 | ABS_Y 2000 | ABS_Y 2000
> ABS_PRESSURE 78 | ABS_PRESSURE 78 | ABS_PRESSURE 78
> BTN_TOOL_DOUBLETAP 0 | BTN_TOOL_DOUBLETAP 0 | BTN_TOOL_DOUBLETAP 0
> BTN_TOOL_TRIPLETAP 1 | BTN_TOOL_TRIPLETAP 1 | BTN_TOOL_TRIPLETAP 1
> --- SYN_REPORT (0) ---------- | |
> ABS_MT_SLOT 0 | |
> ABS_MT_POSITION_X 4000 | |
> ABS_MT_POSITION_Y 4000 | |
> ABS_MT_PRESSURE 78 | |
> ABS_MT_SLOT 1 | |
> ABS_MT_TRACKING_ID 55 | |
> ABS_MT_POSITION_X 2000 | |
> ABS_MT_POSITION_Y 2000 | |
> ABS_MT_PRESSURE 72 | |
> ABS_X 4000 | |
> ABS_Y 4000 | |
> ABS_PRESSURE 78 | |
> --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ----------
> | |
> ... | ... | ...
> | |
> ------------------------------------ 3 fingers release ------------------------------------
> | |
> | |
> --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ----------
> | | ABS_MT_SLOT 2
> | | ABS_MT_POSITION_X 4000
> | | ABS_MT_POSITION_Y 4000
> | | ABS_MT_PRESSURE 45
> ABS_MT_SLOT 0 | ABS_MT_SLOT 0 | ABS_MT_SLOT 0
> ABS_MT_TRACKING_ID -1 | ABS_MT_TRACKING_ID -1 | ABS_MT_TRACKING_ID -1
> ABS_MT_SLOT 1 | ABS_MT_SLOT 2 | ABS_MT_SLOT 1
> ABS_MT_TRACKING_ID -1 | ABS_MT_TRACKING_ID -1 | ABS_MT_TRACKING_ID -1
> | | ABS_X 4000
> | | ABS_Y 4000
> BTN_TOUCH 0 | BTN_TOUCH 0 | ABS_PRESSURE 45
> ABS_PRESSURE 0 | ABS_PRESSURE 0 | BTN_TOOL_FINGER 1
> BTN_TOOL_TRIPLETAP 0 | BTN_TOOL_TRIPLETAP 0 | BTN_TOOL_TRIPLETAP 0
> --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ---------- | --- SYN_REPORT (0) ----------
> | | ABS_MT_SLOT 2
> | | ABS_MT_TRACKING_ID -1
> | | BTN_TOUCH 0
> | | ABS_PRESSURE 0
> | | BTN_TOOL_FINGER 0
> | | --- SYN_REPORT (0) ----------
>
>


\
 
 \ /
  Last update: 2015-06-11 19:41    [W:0.129 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site