lkml.org 
[lkml]   [2015]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ipmi: Convert the IPMI SI ACPI handling to a platform device
Date
From: Corey Minyard <cminyard@mvista.com>

The IPMI SI driver was using direct PNP, but that was not really
ideal because the IPMI device is a platform device. There was
some special handling in the acpi_pnp.c code for making this work,
but that was breaking ACPI handling for the IPMI SSIF driver.

So use a platform device for ACPI detection and remove the
entry from acpi_pnp.c.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
---
drivers/acpi/acpi_pnp.c | 2 -
drivers/char/ipmi/ipmi_si_intf.c | 320 +++++++++++++++++++--------------------
2 files changed, 157 insertions(+), 165 deletions(-)


I'm posting this, primarily for comments from the ACPI group, since I'm
removing IPI0001 from the acpi_pnp_device_ids array, and to be sure that
I'm doing this correctly.

Also, anyone feel free to test this, obviously :).

Thanks,

-corey


diff --git a/drivers/acpi/acpi_pnp.c b/drivers/acpi/acpi_pnp.c
index ff6d8ad..896351be 100644
--- a/drivers/acpi/acpi_pnp.c
+++ b/drivers/acpi/acpi_pnp.c
@@ -19,8 +19,6 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = {
{"PNP0600"}, /* Generic ESDI/IDE/ATA compatible hard disk controller */
/* floppy */
{"PNP0700"},
- /* ipmi_si */
- {"IPI0001"},
/* tpm_inf_pnp */
{"IFX0101"}, /* Infineon TPMs */
{"IFX0102"}, /* Infineon TPMs */
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index e8b406b..7a93574 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -64,7 +64,6 @@
#include <linux/dmi.h>
#include <linux/string.h>
#include <linux/ctype.h>
-#include <linux/pnp.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
@@ -309,9 +308,6 @@ static int num_force_kipmid;
#ifdef CONFIG_PCI
static bool pci_registered;
#endif
-#ifdef CONFIG_ACPI
-static bool pnp_registered;
-#endif
#ifdef CONFIG_PARISC
static bool parisc_registered;
#endif
@@ -2233,134 +2229,6 @@ static void spmi_find_bmc(void)
try_init_spmi(spmi);
}
}
-
-static int ipmi_pnp_probe(struct pnp_dev *dev,
- const struct pnp_device_id *dev_id)
-{
- struct acpi_device *acpi_dev;
- struct smi_info *info;
- struct resource *res, *res_second;
- acpi_handle handle;
- acpi_status status;
- unsigned long long tmp;
- int rv = -EINVAL;
-
- acpi_dev = pnp_acpi_device(dev);
- if (!acpi_dev)
- return -ENODEV;
-
- info = smi_info_alloc();
- if (!info)
- return -ENOMEM;
-
- info->addr_source = SI_ACPI;
- printk(KERN_INFO PFX "probing via ACPI\n");
-
- handle = acpi_dev->handle;
- info->addr_info.acpi_info.acpi_handle = handle;
-
- /* _IFT tells us the interface type: KCS, BT, etc */
- status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
- if (ACPI_FAILURE(status)) {
- dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
- goto err_free;
- }
-
- switch (tmp) {
- case 1:
- info->si_type = SI_KCS;
- break;
- case 2:
- info->si_type = SI_SMIC;
- break;
- case 3:
- info->si_type = SI_BT;
- break;
- case 4: /* SSIF, just ignore */
- rv = -ENODEV;
- goto err_free;
- default:
- dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
- goto err_free;
- }
-
- res = pnp_get_resource(dev, IORESOURCE_IO, 0);
- if (res) {
- info->io_setup = port_setup;
- info->io.addr_type = IPMI_IO_ADDR_SPACE;
- } else {
- res = pnp_get_resource(dev, IORESOURCE_MEM, 0);
- if (res) {
- info->io_setup = mem_setup;
- info->io.addr_type = IPMI_MEM_ADDR_SPACE;
- }
- }
- if (!res) {
- dev_err(&dev->dev, "no I/O or memory address\n");
- goto err_free;
- }
- info->io.addr_data = res->start;
-
- info->io.regspacing = DEFAULT_REGSPACING;
- res_second = pnp_get_resource(dev,
- (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
- IORESOURCE_IO : IORESOURCE_MEM,
- 1);
- if (res_second) {
- if (res_second->start > info->io.addr_data)
- info->io.regspacing = res_second->start - info->io.addr_data;
- }
- info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = 0;
-
- /* If _GPE exists, use it; otherwise use standard interrupts */
- status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
- if (ACPI_SUCCESS(status)) {
- info->irq = tmp;
- info->irq_setup = acpi_gpe_irq_setup;
- } else if (pnp_irq_valid(dev, 0)) {
- info->irq = pnp_irq(dev, 0);
- info->irq_setup = std_irq_setup;
- }
-
- info->dev = &dev->dev;
- pnp_set_drvdata(dev, info);
-
- dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
- res, info->io.regsize, info->io.regspacing,
- info->irq);
-
- rv = add_smi(info);
- if (rv)
- kfree(info);
-
- return rv;
-
-err_free:
- kfree(info);
- return rv;
-}
-
-static void ipmi_pnp_remove(struct pnp_dev *dev)
-{
- struct smi_info *info = pnp_get_drvdata(dev);
-
- cleanup_one_si(info);
-}
-
-static const struct pnp_device_id pnp_dev_table[] = {
- {"IPI0001", 0},
- {"", 0},
-};
-
-static struct pnp_driver ipmi_pnp_driver = {
- .name = DEVICE_NAME,
- .probe = ipmi_pnp_probe,
- .remove = ipmi_pnp_remove,
- .id_table = pnp_dev_table,
-};
-
-MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
#endif

#ifdef CONFIG_DMI
@@ -2669,10 +2537,20 @@ static struct pci_driver ipmi_pci_driver = {
};
#endif /* CONFIG_PCI */

-static const struct of_device_id ipmi_match[];
-static int ipmi_probe(struct platform_device *dev)
-{
#ifdef CONFIG_OF
+static const struct of_device_id of_ipmi_match[] =
+{
+ { .type = "ipmi", .compatible = "ipmi-kcs",
+ .data = (void *)(unsigned long) SI_KCS },
+ { .type = "ipmi", .compatible = "ipmi-smic",
+ .data = (void *)(unsigned long) SI_SMIC },
+ { .type = "ipmi", .compatible = "ipmi-bt",
+ .data = (void *)(unsigned long) SI_BT },
+ {},
+};
+
+static int of_ipmi_probe(struct platform_device *dev)
+{
const struct of_device_id *match;
struct smi_info *info;
struct resource resource;
@@ -2683,9 +2561,9 @@ static int ipmi_probe(struct platform_device *dev)

dev_info(&dev->dev, "probing via device tree\n");

- match = of_match_device(ipmi_match, &dev->dev);
+ match = of_match_device(of_ipmi_match, &dev->dev);
if (!match)
- return -EINVAL;
+ return -ENODEV;

if (!of_device_is_available(np))
return -EINVAL;
@@ -2754,33 +2632,160 @@ static int ipmi_probe(struct platform_device *dev)
kfree(info);
return ret;
}
-#endif
return 0;
}
+#else
+#define of_ipmi_match NULL
+static int of_ipmi_probe(struct platform_device *dev)
+{
+ return -ENODEV;
+}
+#endif

-static int ipmi_remove(struct platform_device *dev)
+#ifdef CONFIG_ACPI
+static int acpi_ipmi_probe(struct platform_device *dev)
{
-#ifdef CONFIG_OF
- cleanup_one_si(dev_get_drvdata(&dev->dev));
+ struct smi_info *info;
+ struct resource *res, *res_second;
+ acpi_handle handle;
+ acpi_status status;
+ unsigned long long tmp;
+ int rv = -EINVAL;
+
+ handle = ACPI_HANDLE(&dev->dev);
+ if (!handle)
+ return -ENODEV;
+
+ info = smi_info_alloc();
+ if (!info)
+ return -ENOMEM;
+
+ info->addr_source = SI_ACPI;
+ printk(KERN_INFO PFX "probing via ACPI\n");
+
+ info->addr_info.acpi_info.acpi_handle = handle;
+
+ /* _IFT tells us the interface type: KCS, BT, etc */
+ status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
+ goto err_free;
+ }
+
+ switch (tmp) {
+ case 1:
+ info->si_type = SI_KCS;
+ break;
+ case 2:
+ info->si_type = SI_SMIC;
+ break;
+ case 3:
+ info->si_type = SI_BT;
+ break;
+ case 4: /* SSIF, just ignore */
+ rv = -ENODEV;
+ goto err_free;
+ default:
+ dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
+ goto err_free;
+ }
+
+ res = platform_get_resource(dev, IORESOURCE_IO, 0);
+ if (res) {
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ } else {
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (res) {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ }
+ }
+ if (!res) {
+ dev_err(&dev->dev, "no I/O or memory address\n");
+ goto err_free;
+ }
+ info->io.addr_data = res->start;
+
+ info->io.regspacing = DEFAULT_REGSPACING;
+ res_second = platform_get_resource(dev,
+ (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
+ IORESOURCE_IO : IORESOURCE_MEM,
+ 1);
+ if (res_second) {
+ if (res_second->start > info->io.addr_data)
+ info->io.regspacing = res_second->start - info->io.addr_data;
+ }
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = 0;
+
+ /* If _GPE exists, use it; otherwise use standard interrupts */
+ status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
+ if (ACPI_SUCCESS(status)) {
+ info->irq = tmp;
+ info->irq_setup = acpi_gpe_irq_setup;
+ } else {
+ int irq = platform_get_irq(dev, 0);
+
+ if (irq > 0) {
+ info->irq = irq;
+ info->irq_setup = std_irq_setup;
+ }
+ }
+
+ info->dev = &dev->dev;
+ platform_set_drvdata(dev, info);
+
+ dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
+ res, info->io.regsize, info->io.regspacing,
+ info->irq);
+
+ rv = add_smi(info);
+ if (rv)
+ kfree(info);
+
+ return rv;
+
+err_free:
+ kfree(info);
+ return rv;
+}
+
+static struct acpi_device_id acpi_ipmi_match[] = {
+ { "IPI0001", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, acpi_ipmi_match);
+#else
+static int acpi_ipmi_probe(struct platform_device *dev)
+{
+ return -ENODEV;
+}
#endif
- return 0;
+
+static int ipmi_probe(struct platform_device *dev)
+{
+ if (of_ipmi_probe(dev) == 0)
+ return 0;
+
+ return acpi_ipmi_probe(dev);
}

-static const struct of_device_id ipmi_match[] =
+static int ipmi_remove(struct platform_device *dev)
{
- { .type = "ipmi", .compatible = "ipmi-kcs",
- .data = (void *)(unsigned long) SI_KCS },
- { .type = "ipmi", .compatible = "ipmi-smic",
- .data = (void *)(unsigned long) SI_SMIC },
- { .type = "ipmi", .compatible = "ipmi-bt",
- .data = (void *)(unsigned long) SI_BT },
- {},
-};
+ struct smi_info *info = dev_get_drvdata(&dev->dev);
+
+ if (info)
+ cleanup_one_si(info);
+
+ return 0;
+}

static struct platform_driver ipmi_driver = {
.driver = {
.name = DEVICE_NAME,
- .of_match_table = ipmi_match,
+ .of_match_table = of_ipmi_match,
+ .acpi_match_table = ACPI_PTR(acpi_ipmi_match),
},
.probe = ipmi_probe,
.remove = ipmi_remove,
@@ -3692,13 +3697,6 @@ static int init_ipmi_si(void)
}
#endif

-#ifdef CONFIG_ACPI
- if (si_tryacpi) {
- pnp_register_driver(&ipmi_pnp_driver);
- pnp_registered = true;
- }
-#endif
-
#ifdef CONFIG_DMI
if (si_trydmi)
dmi_find_bmc();
@@ -3850,10 +3848,6 @@ static void cleanup_ipmi_si(void)
if (pci_registered)
pci_unregister_driver(&ipmi_pci_driver);
#endif
-#ifdef CONFIG_ACPI
- if (pnp_registered)
- pnp_unregister_driver(&ipmi_pnp_driver);
-#endif
#ifdef CONFIG_PARISC
if (parisc_registered)
unregister_parisc_driver(&ipmi_parisc_driver);
--
1.8.3.1


\
 
 \ /
  Last update: 2015-06-10 15:21    [W:0.059 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site