lkml.org 
[lkml]   [2015]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ACPI / enumeration: Document the rules regarding the PRP0001 device ID
Date
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Document how the ACPI device enumeration code uses the special
PRP0001 device ID.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Documentation/acpi/enumeration.txt | 49 +++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)

Index: linux-pm/Documentation/acpi/enumeration.txt
===================================================================
--- linux-pm.orig/Documentation/acpi/enumeration.txt
+++ linux-pm/Documentation/acpi/enumeration.txt
@@ -359,3 +359,52 @@ the id should be set like:
The ACPI id "XYZ0001" is then used to lookup an ACPI device directly under
the MFD device and if found, that ACPI companion device is bound to the
resulting child platform device.
+
+Device Tree namespace link device ID
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The Device Tree protocol uses device indentification based on the "compatible"
+property whose value is a string or an array of strings recognized as device
+identifiers by drivers and the driver core. The set of all those strings may be
+regarded as a device indentification namespace analogous to the ACPI/PNP device
+ID namespace. Consequently, in principle it should not be necessary to allocate
+a new (and arguably redundant) ACPI/PNP device ID for a devices with an existing
+identification string in the Device Tree (DT) namespace, especially if that ID
+is only needed to indicate that a given device is compatible with another one,
+presumably having a matching driver in the kernel already.
+
+In ACPI, the device identification object called _CID (Compatible ID) is used to
+list the IDs of devices the given one is compatible with, but those IDs must
+belong to one of the namespaces prescribed by the ACPI specification (see
+Section 6.1.2 of ACPI 6.0 for details) and the DT namespace is not one of them.
+Moreover, the specification mandates that either a _HID or an _ADR identificaion
+object be present for all ACPI objects representing devices (Section 6.1 of ACPI
+6.0). For non-enumerable bus types that object must be _HID and its value must
+be a device ID from one of the namespaces prescribed by the specification too.
+
+The special DT namespace link device ID, PRP0001, provides a means to use the
+existing DT-compatible device identification in ACPI and to satisfy the above
+requirements following from the ACPI specification at the same time. Namely,
+if PRP0001 is returned by _HID, the ACPI subsystem will look for the
+"compatible" property in the device object's _DSD and will use the value of that
+property to identify the corresponding device in analogy with the original DT
+device identification algorithm. If the "compatible" propoerty is not present
+or its value is not valid, the device will not be enumerated by the ACPI
+subsystem. Otherwise, it will be enumerated automatically as a platform device
+and the identification strings from the "compatible" property value will be used
+to find a driver for the device along with the device IDs listed by _CID (if
+present).
+
+Analogously, if PRP0001 is present in the list of device IDs returned by _CID,
+the identification strings listed by the "compatible" property value (if present
+and valid) will be used to look for a driver matching the device, but in that
+case their relative priority with respect to the other device IDs listed by
+_HID and _CID depends on the position of PRP0001 in the _CID return package.
+Specifically, the device IDs returned by _HID and preceding PRP0001 in the _CID
+return package will be checked first. Also in that case the bus type the device
+will be enumerated to depends on the device ID returned by _HID.
+
+It is valid to define device objects with a _HID returning PRP0001 and without
+the "compatible" property in the _DSD or a _CID as long as one of their
+ancestors provides a _DSD with a valid "compatible" property. Such device
+objects are then simply regarded as additional "blocks" providing hierarchical
+configuration information to the driver of the composite ancestor device.


\
 
 \ /
  Last update: 2015-06-11 03:21    [W:2.035 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site