lkml.org 
[lkml]   [2015]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 3/4] ARM: dts: UniPhier: add support for UniPhier SoCs and boards
Date
Initial device trees for UniPhier SoCs: PH1-sLD3, PH1-LD4, PH1-Pro4,
and PH1-sLD8.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

Changes in v7:
- Remove redundant "fifo-size" from the 16550A uart node

Changes in v6:
- Remove redundant interrupt-parent property from timer nodes.

Changes in v5: None
Changes in v4:
- Add system-bus-controller-misc node instead of uniphier-smp-reg node

Changes in v3:
- License under GPL/X11
- Drop "earlyprintk" kernel-parameter, add "stdout-path" property
- Add syscon device for SMP boot support in order not to
hard-code register address in platsmp.c

Changes in v2: None

arch/arm/boot/dts/Makefile | 5 ++
arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts | 79 ++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 110 +++++++++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts | 79 ++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 117 +++++++++++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts | 80 ++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 117 +++++++++++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts | 79 ++++++++++++++++++
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 110 +++++++++++++++++++++++++
arch/arm/boot/dts/uniphier-support-card.dtsi | 65 +++++++++++++++
10 files changed, 841 insertions(+)
create mode 100644 arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
create mode 100644 arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
create mode 100644 arch/arm/boot/dts/uniphier-support-card.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 86217db..558b787 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -600,6 +600,11 @@ dtb-$(CONFIG_ARCH_U8500) += \
ste-hrefv60plus-tvk.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ uniphier-ph1-sld3-ref.dtb \
+ uniphier-ph1-ld4-ref.dtb \
+ uniphier-ph1-pro4-ref.dtb \
+ uniphier-ph1-sld8-ref.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
versatile-pb.dtb
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
new file mode 100644
index 0000000..200b0c9
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-LD4 Reference Board";
+ compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 49 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
new file mode 100644
index 0000000..6a34c56
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-ld4";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
new file mode 100644
index 0000000..d891135
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-Pro4 Reference Board";
+ compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 50 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
new file mode 100644
index 0000000..dc63360
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-pro4";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,uniphier-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
new file mode 100644
index 0000000..3ea64ae
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -0,0 +1,80 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-sLD3 Reference Board";
+ compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000
+ 0xc0000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 49 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
new file mode 100644
index 0000000..248b188
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-sld3";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,uniphier-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ timer@20000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20000200 0x20>;
+ interrupts = <1 11 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@20000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20000600 0x20>;
+ interrupts = <1 13 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@20001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x20001000 0x1000>,
+ <0x20000100 0x100>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
new file mode 100644
index 0000000..dcdc4f7
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-sLD8 Reference Board";
+ compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 48 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
new file mode 100644
index 0000000..baa71e1
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-sld8";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
new file mode 100644
index 0000000..da271e3
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Device Tree Source for UniPhier Support Card (Expansion Board)
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&extbus {
+ support_card: support_card {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ethsc: ethernet@00000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x00000000 0x1000>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ };
+
+ serialsc: uart@000b0000 {
+ compatible = "ns16550a";
+ reg = <0x000b0000 0x20>;
+ clock-frequency = <12288000>;
+ reg-shift = <1>;
+ };
+ };
+};
--
1.9.1


\
 
 \ /
  Last update: 2015-05-08 06:41    [W:0.209 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site