lkml.org 
[lkml]   [2015]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] twl4030_charger: find associated phy by more reliable means.
On Mon, Mar 23, 2015 at 09:52:48AM +1100, NeilBrown wrote:
> From: NeilBrown <neilb@suse.de>
>
> twl4030_charger currently finds the associated phy
> using usb_get_phy() which will return the first USB2 phy.
> If your platform has multiple such phys (as mine does),
> this is not reliable (and reliably fails on the GTA04).
>
> Change to use devm_usb_get_phy_by_node(), having found the
> node by looking for an appropriately named sibling in
> device-tree.
>
> This makes usb-charging dependent on correct device-tree
> configuration.
>
> Acked-by: Pavel Machek <pavel@ucw.cz>
> Signed-off-by: NeilBrown <neilb@suse.de>
> ---

Sebastian, can I get your Acked-by here ?

> .../devicetree/bindings/power/twl-charger.txt | 10 ++++++++++
> .../devicetree/bindings/usb/twlxxxx-usb.txt | 3 +++
> drivers/power/twl4030_charger.c | 21 +++++++++-----------
> 3 files changed, 22 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/power/twl-charger.txt b/Documentation/devicetree/bindings/power/twl-charger.txt
> index d5c706216df5..3b4ea1b73b38 100644
> --- a/Documentation/devicetree/bindings/power/twl-charger.txt
> +++ b/Documentation/devicetree/bindings/power/twl-charger.txt
> @@ -1,5 +1,15 @@
> TWL BCI (Battery Charger Interface)
>
> +The battery charger needs to interact with the USB phy in order
> +to know when charging is permissible, and when there is a connection
> +or disconnection.
> +
> +The choice of phy cannot be configured at a hardware level, so there
> +is no value in explicit configuration in device-tree. Rather
> +if there is a sibling of the BCI node which is compatible with
> +"ti,twl4030-usb", then that is used to determine when and how
> +use USB power for charging.
> +
> Required properties:
> - compatible:
> - "ti,twl4030-bci"
> diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
> index 0aee0ad3f035..17327a296110 100644
> --- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
> @@ -30,6 +30,9 @@ TWL4030 USB PHY AND COMPARATOR
> - usb_mode : The mode used by the phy to connect to the controller. "1"
> specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
>
> +If a sibling node is compatible "ti,twl4030-bci", then it will find
> +this device and query it for USB power status.
> +
> twl4030-usb {
> compatible = "ti,twl4030-usb";
> interrupts = < 10 4 >;
> diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
> index d35b83e635b5..b07f4e2f2dde 100644
> --- a/drivers/power/twl4030_charger.c
> +++ b/drivers/power/twl4030_charger.c
> @@ -629,10 +629,15 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
>
> INIT_WORK(&bci->work, twl4030_bci_usb_work);
>
> - bci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
> - if (!IS_ERR_OR_NULL(bci->transceiver)) {
> - bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
> - usb_register_notifier(bci->transceiver, &bci->usb_nb);
> + bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
> + if (bci->dev->of_node) {
> + struct device_node *phynode;
> +
> + phynode = of_find_compatible_node(bci->dev->of_node->parent,
> + NULL, "ti,twl4030-usb");
> + if (phynode)
> + bci->transceiver = devm_usb_get_phy_by_node(
> + bci->dev, phynode, &bci->usb_nb);
> }
>
> /* Enable interrupts now. */
> @@ -662,10 +667,6 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
> return 0;
>
> fail_unmask_interrupts:
> - if (!IS_ERR_OR_NULL(bci->transceiver)) {
> - usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
> - usb_put_phy(bci->transceiver);
> - }
> free_irq(bci->irq_bci, bci);
> fail_bci_irq:
> free_irq(bci->irq_chg, bci);
> @@ -694,10 +695,6 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
> twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
> TWL4030_INTERRUPTS_BCIIMR2A);
>
> - if (!IS_ERR_OR_NULL(bci->transceiver)) {
> - usb_unregister_notifier(bci->transceiver, &bci->usb_nb);
> - usb_put_phy(bci->transceiver);
> - }
> free_irq(bci->irq_bci, bci);
> free_irq(bci->irq_chg, bci);
> power_supply_unregister(&bci->usb);
>
>

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-05-08 18:21    [W:0.415 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site