lkml.org 
[lkml]   [2015]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 0/6] powernv: cpufreq: Report frequency throttle by OCC
From
On 4 May 2015 at 14:24, Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> wrote:
> This patchset intends to add frequency throttle reporting mechanism
> to powernv-cpufreq driver when OCC throttles the frequency. OCC is an
> On-Chip-Controller which takes care of the power and thermal safety of
> the chip. The CPU frequency can be throttled during an OCC reset or
> when OCC tries to limit the max allowed frequency. The patchset will
> report such conditions so as to keep the user informed about reason
> for the drop in performance of workloads when frequency is throttled.
>
> Changes from v2:
> - Split into multiple patches
> - Semantic fixes
>
> Shilpasri G Bhat (6):
> cpufreq: poowernv: Handle throttling due to Pmax capping at chip level
> powerpc/powernv: Add definition of OPAL_MSG_OCC message type
> cpufreq: powernv: Register for OCC related opal_message notification
> cpufreq: powernv: Call throttle_check() on receiving OCC_THROTTLE
> cpufreq: powernv: Report Psafe only if PMSR.psafe_mode_active bit is
> set
> cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling
>
> arch/powerpc/include/asm/opal-api.h | 8 ++
> drivers/cpufreq/powernv-cpufreq.c | 199 +++++++++++++++++++++++++++++++++---
> 2 files changed, 192 insertions(+), 15 deletions(-)

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>


\
 
 \ /
  Last update: 2015-05-08 07:21    [W:0.105 / U:1.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site