lkml.org 
[lkml]   [2015]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 0/2] clk: improve handling of orphan clocks
Date
Am Freitag, 8. Mai 2015, 10:13:55 schrieb Sascha Hauer:
> On Thu, May 07, 2015 at 11:53:18PM -0700, Stephen Boyd wrote:
> > On 05/07, Kevin Hilman wrote:
> > > On Thu, May 7, 2015 at 2:03 PM, Stephen Boyd <sboyd@codeaurora.org>
wrote:
> > > > On 05/07/15 08:17, Kevin Hilman wrote:
> > > >> On Fri, May 1, 2015 at 4:40 PM, Stephen Boyd <sboyd@codeaurora.org>
wrote:
> > > >>> On 05/01/15 15:07, Heiko Stübner wrote:
> > > >>>> Am Freitag, 1. Mai 2015, 13:52:47 schrieb Stephen Boyd:
> > > >>>>>> Instead I guess we could hook it less deep into clk_get_sys, like
> > > >>>>>> in the
> > > >>>>>> following patch?
> > > >>>>>
> > > >>>>> It looks like it will work at least, but still I'd prefer to keep
> > > >>>>> the
> > > >>>>> orphan check contained to clk.c. How about this compile tested
> > > >>>>> only patch?
> > > >>>>
> > > >>>> I gave this a spin on my rk3288-firefly board. It still boots, the
> > > >>>> clock tree looks the same and it also still defers nicely in the
> > > >>>> scenario I needed it for. The implementation also looks nice - and
> > > >>>> of course much more compact than my check in two places :-) . I
> > > >>>> don't know if you want to put this as follow-up on top or fold it
> > > >>>> into the original orphan-check, so in any case
> > > >>>>
> > > >>>> Tested-by: Heiko Stuebner <heiko@sntech.de>
> > > >>>> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> > > >>>
> > > >>> Thanks. I'm leaning towards tossing your patch 2/2 and replacing it
> > > >>> with
> > > >>> my patch and a note that it's based on an earlier patch from you.
> > > >>
> > > >> It appears this has landed in linux-next in the form of 882667c1fcf1
> > > >> clk: prevent orphan clocks from being used. A bunch of boot failures
> > > >> for sunxi in today's linux-next[1] were bisected down to that patch.
> > > >>
> > > >> I confirmed that reverting that commit on top of next/master gets
> > > >> sunxi booting again.
> > > >
> > > > Thanks for the report. I've removed the two clk orphan patches from
> > > > clk-next. Would it be possible to try with next-20150507 and
> > > > clk_ignore_unused on the command line?
> > >
> > > That doesn't help. I tried on cubieboard2 and bananapi.
> >
> > Thanks for trying.
> >
> > > > Also we can try to see if
> > > > critical clocks aren't being forced on by applying this patch and
> > > > looking for clk_get() failures
> > >
> > > From cubieboard2, there's a few that look rather important:
> > >
> > > [ 0.000000] Additional per-CPU info printed with stalls.
> > > [ 0.000000] Build-time adjustment of leaf fanout to 32.
> > > [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
> > > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32,
> > > nr_cpu_ids=2
> > > [ 0.000000] NR_IRQS:16 nr_irqs:16 16
> > > [ 0.000000] clk: couldn't get parent clock 0 for /clocks/ahb@01c20054
> > > [ 0.000000] Failed to enable critical clock cpu
> > > [ 0.000000] Failed to enable critical clock pll5_ddr
> > > [ 0.000000] Failed to enable critical clock ahb_sdram
> > > [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
> >
> > Ok. So it seems we need to come up with some solution to the
> > "critical clocks" problem that doesn't require the individual
> > clock drivers to call clk_prepare_enable().
>
> I'm getting more and more unsure if we can really handle the complexity
> we get by allowing to register orphaned clocks. On one hand we can't
> handle the orphaned clocks properly when we do a clk_prepare/enable on
> them, on the other hand we run into trouble when we forbid to
> prepare/enable them. The fact that clocks can become orphans by
> reparenting them makes it even more complicated.
> Maybe allowing orphans is something that has to be revisited.

hmm, I don't see it this drastic. I was expecting a lot more fallout from
changing the behaviour of orphaned clocks over all arches using the CCF.

From the kernelci-boards only the Sunxi-ones seem to have been affected at all
and also only because they need a "regulator-always-on" equivalent in the CCF,
which currently hijacks prepare/enable inside the clock driver to achive this.

On the Rockchip clocks we have something similar, with the only difference that
it is done after all clocks are registered and does not need to access the 3
orphans we have at this point due to their source clock coming from an
external i2c-connected chip that gets probed a lot later.



\
 
 \ /
  Last update: 2015-05-08 11:41    [W:0.086 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site