lkml.org 
[lkml]   [2015]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 2/3] leds: ktd2692: add device tree bindings for ktd2692
Hi Ingi,

On 05/08/2015 05:03 AM, Ingi Kim wrote:
> This patch adds the device tree bindings for ktd2692 flash LEDs.
> Add Optional properties of child node for Flash LED
>
> Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
> ---
> .../devicetree/bindings/leds/leds-ktd2692.txt | 50 ++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
> new file mode 100644
> index 0000000..cf45492
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
> @@ -0,0 +1,50 @@
> +* Kinetic Technologies - KTD2692 Flash LED Driver
> +
> +KTD2692 is the ideal power solution for high-power flash LEDs.
> +It uses ExpressWire single-wire programming for maximum flexibility.
> +
> +The ExpressWire interface through CTRL pin can control LED on/off and
> +enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
> +Flash timeout, LVP(low voltage protection).
> +
> +Also, When the AUX pin is pulled high while CTRL pin is high,
> +LED current will be ramped up to the flash-mode current level.
> +
> +Required properties:
> +- compatible: "kinetic,ktd2692"

How about:

compatible : Should be "kinetic,ktd2692".

Pleas put space between the property name and a colon consequently.

> +- ctrl-gpio : gpio pin in order control CTRL pin
> +- aux-gpio : gpio pin in order control AUX pin

Documentation/devicetree/bindings/gpio/gpio.txt states:

"GPIO properties should be named "[<name>-]gpios".

Please adhere to this. Also please begin description after colon
with a capital letter and put a dot at the end of sentence, e.g.:

ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
aux-gpio : Specifier of the GPIO connected to AUX pin.

> +Optional properties:
> +- vin-supply : "vin" LED supply (2.7V to 5.5V)
> + See Documentation/devicetree/bindings/regulator/regulator.txt
> +
> +A discrete LED element connected to the device must be represented by a child
> +node - see Documentation/devicetree/bindings/leds/common.txt.
> +
> +Required properties for flash LED child nodes:
> + See Documentation/devicetree/bindings/leds/common.txt
> +- led-max-microamp : Minimum Threshold for Timer protection
> + is defined internally (Maximum 300mA)
> +- flash-max-microamp : Flash LED maximum current
> + Formula : I(mA) = 15000 / Rset
> +- flash-max-timeout-us : Flash LED maximum timeout
> +
> +Optional properties for flash LED child nodes:
> +- label : see Documentation/devicetree/bindings/leds/common.txt
> +
> +Example:
> +
> +ktd2692 {
> + compatible = "kinetic,ktd2692";
> + ctrl-gpio = <&gpc0 1 0>;
> + aux-gpio = <&gpc0 2 0>;

ctrl-gpios = <&gpc0 1 0>;
aux-gpios = <&gpc0 2 0>;

> + vin-supply = <&vbat>;
> +
> + flash-led {
> + label = "ktd2692-flash";
> + led-max-microamp = <300000>;
> + flash-max-microamp = <1500000>;
> + flash-max-timeout-us = <1835000>;
> + };
> +};
>


--
Best Regards,
Jacek Anaszewski


\
 
 \ /
  Last update: 2015-05-08 10:41    [W:0.091 / U:31.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site