lkml.org 
[lkml]   [2015]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2] clk samsung exynos5420 add CLK_RECALC_NEW_RATES flag to mout_apll and mout_kpll clock.
Date
Addition of CLK_RECALC_NEW_RATES flag to support Exynos5420 cpu clk so that
correct divider values are re-calculated after both pre/post
clock notifiers had run for mout_apll clock and mout_kpll clock.

Below is the output of cpupower utility.
Observation their is considreable improvement in cpufreq stats
after applying this patch.

Before this patch applied below is the output of cpupower.
----------------------------------------------------------
root@odroidxu3:/usr/src/odroidxu3-4.y-testing# echo performance | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
performance
root@odroidxu3:/usr/src/odroidxu3-4.y-testing#
root@odroidxu3:/usr/src/odroidxu3-4.y-testing#
root@odroidxu3:/usr/src/odroidxu3-4.y-testing# cpupower -c 1 frequency-info
analyzing CPU 1:
driver: arm-big-little
CPUs which run at the same hardware frequency: 1 2 3 4
CPUs which need to have their frequency coordinated by software: 1 2 3 4
maximum transition latency: 154 us.
hardware limits: 200 MHz - 1.80 GHz
available frequency steps: 200 MHz, 300 MHz, 400 MHz, 500 MHz, 600 MHz, 700 MHz, 800 MHz, 900 MHz, 1000 MHz, 1.10 GHz, 1.20 GHz, 1.30 GHz, 1.40 GHz, 1.50 GHz, 1.60 GHz, 1.70 GHz, 1.80 GHz
available cpufreq governors: ondemand, conservative, userspace, powersave, performance
current policy: frequency should be within 200 MHz and 1.80 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 1.80 GHz (asserted by call to hardware).
cpufreq stats: 200 MHz:22.07%, 300 MHz:1.08%, 400 MHz:0.17%, 500 MHz:0.24%, 600 MHz:0.37%, 700 MHz:0.20%, 800 MHz:0.09%, 900 MHz:0.05%, 1000 MHz:0.02%, 1.10 GHz:0.12%, 1.20 GHz:0.05%, 1.30 GHz:0.07%, 1.40 GHz:0.04%, 1.50 GHz:0.02%, 1.60 GHz:0.00%, 1.70 GHz:0.00%, 1.80 GHz:75.43% (137)

After applied this patch below is the output of cpupower.
---------------------------------------------------------
root@odroidxu3:~# echo performance | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
performance
root@odroidxu3:~# cpupower -c 1 frequency-info
analyzing CPU 1:
driver: arm-big-little
CPUs which run at the same hardware frequency: 1 2 3 4
CPUs which need to have their frequency coordinated by software: 1 2 3 4
maximum transition latency: 154 us.
hardware limits: 200 MHz - 1.80 GHz
available frequency steps: 200 MHz, 300 MHz, 400 MHz, 500 MHz, 600 MHz, 700 MHz, 800 MHz, 900 MHz, 1000 MHz, 1.10 GHz, 1.20 GHz, 1.30 GHz, 1.40 GHz, 1.50 GHz, 1.60 GHz, 1.70 GHz, 1.80 GHz
available cpufreq governors: ondemand, conservative, userspace, powersave, performance
current policy: frequency should be within 200 MHz and 1.80 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 1.80 GHz (asserted by call to hardware).
cpufreq stats: 200 MHz:46.57%, 300 MHz:8.18%, 400 MHz:1.93%, 500 MHz:3.51%, 600 MHz:2.13%, 700 MHz:0.88%, 800 MHz:1.69%, 900 MHz:1.02%, 1000 MHz:2.55%, 1.10 GHz:1.17%, 1.20 GHz:0.88%, 1.30 GHz:0.38%, 1.40 GHz:0.27%, 1.50 GHz:0.00%, 1.60 GHz:0.15%, 1.70 GHz:0.44%, 1.80 GHz:28.26% (95)

---------------------------------------------------------
PATCHv2 Fixed the commit log with stats.

Depend on https://lkml.org/lkml/2015/4/3/388

Tested on OdroidXU3 Board
---------------------------------------------------------

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
drivers/clk/samsung/clk-exynos5420.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 462aaee..6c7458c 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -618,10 +618,10 @@ static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2),

MUX_F(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
- CLK_SET_RATE_PARENT, 0),
+ CLK_SET_RATE_PARENT | CLK_RECALC_NEW_RATES, 0),
MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
MUX_F(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1,
- CLK_SET_RATE_PARENT, 0),
+ CLK_SET_RATE_PARENT | CLK_RECALC_NEW_RATES, 0),
MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),

MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2),
--
1.9.1


\
 
 \ /
  Last update: 2015-05-08 10:21    [W:0.415 / U:1.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site