lkml.org 
[lkml]   [2015]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/7 v22] LSM: Remove a comment from security.h
Date
On Saturday, May 02, 2015 03:11:14 PM Casey Schaufler wrote:
> Subject: [PATCH 3/7 v22] LSM: Remove a comment from security.h
>
> Remove the large comment describing the content of the
> security_operations structure from security.h. This
> wasn't done in the previous (2/7) patch because it
> would have exceeded the mail list size limits.
>
> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Acked-by: Paul Moore <paul@paul-moore.com>

> diff --git a/include/linux/security.h b/include/linux/security.h
> index f3d42c6..a2a100e 100644
> --- a/include/linux/security.h
> +++ b/include/linux/security.h
> @@ -186,1276 +186,6 @@ static inline void security_free_mnt_opts(struct
> security_mnt_opts *opts) opts->num_mnt_opts = 0;
> }
>
> -/**
> - * struct security_operations - main security structure
> - *
> - * Security module identifier.
> - *
> - * @name:
> - * A string that acts as a unique identifier for the LSM with max number
> - * of characters = SECURITY_NAME_MAX.
> - *
> - * Security hooks for program execution operations.
> - *
> - * @bprm_set_creds:
> - * Save security information in the bprm->security field, typically based
> - * on information about the bprm->file, for later use by the apply_creds
> - * hook. This hook may also optionally check permissions (e.g. for
> - * transitions between security domains).
> - * This hook may be called multiple times during a single execve, e.g. for
> - * interpreters. The hook can tell whether it has already been called by
> - * checking to see if @bprm->security is non-NULL. If so, then the hook
> - * may decide either to retain the security information saved earlier or
> - * to replace it.
> - * @bprm contains the linux_binprm structure.
> - * Return 0 if the hook is successful and permission is granted.
> - * @bprm_check_security:
> - * This hook mediates the point when a search for a binary handler will
> - * begin. It allows a check the @bprm->security value which is set in the
> - * preceding set_creds call. The primary difference from set_creds is
> - * that the argv list and envp list are reliably available in @bprm. This
> - * hook may be called multiple times during a single execve; and in each
> - * pass set_creds is called first.
> - * @bprm contains the linux_binprm structure.
> - * Return 0 if the hook is successful and permission is granted.
> - * @bprm_committing_creds:
> - * Prepare to install the new security attributes of a process being
> - * transformed by an execve operation, based on the old credentials
> - * pointed to by @current->cred and the information set in @bprm->cred by
> - * the bprm_set_creds hook. @bprm points to the linux_binprm structure.
> - * This hook is a good place to perform state changes on the process such
> - * as closing open file descriptors to which access will no longer be
> - * granted when the attributes are changed. This is called immediately
> - * before commit_creds().
> - * @bprm_committed_creds:
> - * Tidy up after the installation of the new security attributes of a
> - * process being transformed by an execve operation. The new credentials
> - * have, by this point, been set to @current->cred. @bprm points to the
> - * linux_binprm structure. This hook is a good place to perform state
> - * changes on the process such as clearing out non-inheritable signal
> - * state. This is called immediately after commit_creds().
> - * @bprm_secureexec:
> - * Return a boolean value (0 or 1) indicating whether a "secure exec"
> - * is required. The flag is passed in the auxiliary table
> - * on the initial stack to the ELF interpreter to indicate whether libc
> - * should enable secure mode.
> - * @bprm contains the linux_binprm structure.
> - *
> - * Security hooks for filesystem operations.
> - *
> - * @sb_alloc_security:
> - * Allocate and attach a security structure to the sb->s_security field.
> - * The s_security field is initialized to NULL when the structure is
> - * allocated.
> - * @sb contains the super_block structure to be modified.
> - * Return 0 if operation was successful.
> - * @sb_free_security:
> - * Deallocate and clear the sb->s_security field.
> - * @sb contains the super_block structure to be modified.
> - * @sb_statfs:
> - * Check permission before obtaining filesystem statistics for the @mnt
> - * mountpoint.
> - * @dentry is a handle on the superblock for the filesystem.
> - * Return 0 if permission is granted.
> - * @sb_mount:
> - * Check permission before an object specified by @dev_name is mounted on
> - * the mount point named by @nd. For an ordinary mount, @dev_name
> - * identifies a device if the file system type requires a device. For a
> - * remount (@flags & MS_REMOUNT), @dev_name is irrelevant. For a
> - * loopback/bind mount (@flags & MS_BIND), @dev_name identifies the
> - * pathname of the object being mounted.
> - * @dev_name contains the name for object being mounted.
> - * @path contains the path for mount point object.
> - * @type contains the filesystem type.
> - * @flags contains the mount flags.
> - * @data contains the filesystem-specific data.
> - * Return 0 if permission is granted.
> - * @sb_copy_data:
> - * Allow mount option data to be copied prior to parsing by the
filesystem,
> - * so that the security module can extract security-specific mount -
> * options cleanly (a filesystem may modify the data e.g. with strsep()). -
> * This also allows the original mount data to be stripped of security- -
> * specific options to avoid having to make filesystems aware of them. -
> * @type the type of filesystem being mounted.
> - * @orig the original mount data copied from userspace.
> - * @copy copied data which will be passed to the security module.
> - * Returns 0 if the copy was successful.
> - * @sb_remount:
> - * Extracts security system specific mount options and verifies no changes
> - * are being made to those options.
> - * @sb superblock being remounted
> - * @data contains the filesystem-specific data.
> - * Return 0 if permission is granted.
> - * @sb_umount:
> - * Check permission before the @mnt file system is unmounted.
> - * @mnt contains the mounted file system.
> - * @flags contains the unmount flags, e.g. MNT_FORCE.
> - * Return 0 if permission is granted.
> - * @sb_pivotroot:
> - * Check permission before pivoting the root filesystem.
> - * @old_path contains the path for the new location of the current root
> (put_old). - * @new_path contains the path for the new root (new_root).
> - * Return 0 if permission is granted.
> - * @sb_set_mnt_opts:
> - * Set the security relevant mount options used for a superblock
> - * @sb the superblock to set security mount options for
> - * @opts binary data structure containing all lsm mount data
> - * @sb_clone_mnt_opts:
> - * Copy all security options from a given superblock to another
> - * @oldsb old superblock which contain information to clone
> - * @newsb new superblock which needs filled in
> - * @sb_parse_opts_str:
> - * Parse a string of security data filling in the opts structure
> - * @options string containing all mount options known by the LSM
> - * @opts binary data structure usable by the LSM
> - * @dentry_init_security:
> - * Compute a context for a dentry as the inode is not yet available
> - * since NFSv4 has no label backed by an EA anyway.
> - * @dentry dentry to use in calculating the context.
> - * @mode mode used to determine resource type.
> - * @name name of the last path component used to create file
> - * @ctx pointer to place the pointer to the resulting context in.
> - * @ctxlen point to place the length of the resulting context.
> - *
> - *
> - * Security hooks for inode operations.
> - *
> - * @inode_alloc_security:
> - * Allocate and attach a security structure to @inode->i_security. The
> - * i_security field is initialized to NULL when the inode structure is
> - * allocated.
> - * @inode contains the inode structure.
> - * Return 0 if operation was successful.
> - * @inode_free_security:
> - * @inode contains the inode structure.
> - * Deallocate the inode security structure and set @inode->i_security to
> - * NULL.
> - * @inode_init_security:
> - * Obtain the security attribute name suffix and value to set on a newly
> - * created inode and set up the incore security field for the new inode.
> - * This hook is called by the fs code as part of the inode creation
> - * transaction and provides for atomic labeling of the inode, unlike
> - * the post_create/mkdir/... hooks called by the VFS. The hook function
> - * is expected to allocate the name and value via kmalloc, with the caller
> - * being responsible for calling kfree after using them.
> - * If the security module does not use security attributes or does
> - * not wish to put a security attribute on this particular inode,
> - * then it should return -EOPNOTSUPP to skip this processing.
> - * @inode contains the inode structure of the newly created inode.
> - * @dir contains the inode structure of the parent directory.
> - * @qstr contains the last path component of the new object
> - * @name will be set to the allocated name suffix (e.g. selinux).
> - * @value will be set to the allocated attribute value.
> - * @len will be set to the length of the value.
> - * Returns 0 if @name and @value have been successfully set,
> - * -EOPNOTSUPP if no security attribute is needed, or
> - * -ENOMEM on memory allocation failure.
> - * @inode_create:
> - * Check permission to create a regular file.
> - * @dir contains inode structure of the parent of the new file.
> - * @dentry contains the dentry structure for the file to be created.
> - * @mode contains the file mode of the file to be created.
> - * Return 0 if permission is granted.
> - * @inode_link:
> - * Check permission before creating a new hard link to a file.
> - * @old_dentry contains the dentry structure for an existing link to the
> file. - * @dir contains the inode structure of the parent directory of the
> new link. - * @new_dentry contains the dentry structure for the new link.
> - * Return 0 if permission is granted.
> - * @path_link:
> - * Check permission before creating a new hard link to a file.
> - * @old_dentry contains the dentry structure for an existing link
> - * to the file.
> - * @new_dir contains the path structure of the parent directory of
> - * the new link.
> - * @new_dentry contains the dentry structure for the new link.
> - * Return 0 if permission is granted.
> - * @inode_unlink:
> - * Check the permission to remove a hard link to a file.
> - * @dir contains the inode structure of parent directory of the file.
> - * @dentry contains the dentry structure for file to be unlinked.
> - * Return 0 if permission is granted.
> - * @path_unlink:
> - * Check the permission to remove a hard link to a file.
> - * @dir contains the path structure of parent directory of the file.
> - * @dentry contains the dentry structure for file to be unlinked.
> - * Return 0 if permission is granted.
> - * @inode_symlink:
> - * Check the permission to create a symbolic link to a file.
> - * @dir contains the inode structure of parent directory of the symbolic
> link. - * @dentry contains the dentry structure of the symbolic link.
> - * @old_name contains the pathname of file.
> - * Return 0 if permission is granted.
> - * @path_symlink:
> - * Check the permission to create a symbolic link to a file.
> - * @dir contains the path structure of parent directory of
> - * the symbolic link.
> - * @dentry contains the dentry structure of the symbolic link.
> - * @old_name contains the pathname of file.
> - * Return 0 if permission is granted.
> - * @inode_mkdir:
> - * Check permissions to create a new directory in the existing directory
> - * associated with inode structure @dir.
> - * @dir contains the inode structure of parent of the directory to be
> created. - * @dentry contains the dentry structure of new directory.
> - * @mode contains the mode of new directory.
> - * Return 0 if permission is granted.
> - * @path_mkdir:
> - * Check permissions to create a new directory in the existing directory
> - * associated with path structure @path.
> - * @dir contains the path structure of parent of the directory
> - * to be created.
> - * @dentry contains the dentry structure of new directory.
> - * @mode contains the mode of new directory.
> - * Return 0 if permission is granted.
> - * @inode_rmdir:
> - * Check the permission to remove a directory.
> - * @dir contains the inode structure of parent of the directory to be
> removed. - * @dentry contains the dentry structure of directory to be
> removed. - * Return 0 if permission is granted.
> - * @path_rmdir:
> - * Check the permission to remove a directory.
> - * @dir contains the path structure of parent of the directory to be
> - * removed.
> - * @dentry contains the dentry structure of directory to be removed.
> - * Return 0 if permission is granted.
> - * @inode_mknod:
> - * Check permissions when creating a special file (or a socket or a fifo
> - * file created via the mknod system call). Note that if mknod operation
> - * is being done for a regular file, then the create hook will be called
> - * and not this hook.
> - * @dir contains the inode structure of parent of the new file.
> - * @dentry contains the dentry structure of the new file.
> - * @mode contains the mode of the new file.
> - * @dev contains the device number.
> - * Return 0 if permission is granted.
> - * @path_mknod:
> - * Check permissions when creating a file. Note that this hook is called
> - * even if mknod operation is being done for a regular file.
> - * @dir contains the path structure of parent of the new file.
> - * @dentry contains the dentry structure of the new file.
> - * @mode contains the mode of the new file.
> - * @dev contains the undecoded device number. Use new_decode_dev() to get
> - * the decoded device number.
> - * Return 0 if permission is granted.
> - * @inode_rename:
> - * Check for permission to rename a file or directory.
> - * @old_dir contains the inode structure for parent of the old link.
> - * @old_dentry contains the dentry structure of the old link.
> - * @new_dir contains the inode structure for parent of the new link.
> - * @new_dentry contains the dentry structure of the new link.
> - * Return 0 if permission is granted.
> - * @path_rename:
> - * Check for permission to rename a file or directory.
> - * @old_dir contains the path structure for parent of the old link.
> - * @old_dentry contains the dentry structure of the old link.
> - * @new_dir contains the path structure for parent of the new link.
> - * @new_dentry contains the dentry structure of the new link.
> - * Return 0 if permission is granted.
> - * @path_chmod:
> - * Check for permission to change DAC's permission of a file or directory.
> - * @dentry contains the dentry structure.
> - * @mnt contains the vfsmnt structure.
> - * @mode contains DAC's mode.
> - * Return 0 if permission is granted.
> - * @path_chown:
> - * Check for permission to change owner/group of a file or directory.
> - * @path contains the path structure.
> - * @uid contains new owner's ID.
> - * @gid contains new group's ID.
> - * Return 0 if permission is granted.
> - * @path_chroot:
> - * Check for permission to change root directory.
> - * @path contains the path structure.
> - * Return 0 if permission is granted.
> - * @inode_readlink:
> - * Check the permission to read the symbolic link.
> - * @dentry contains the dentry structure for the file link.
> - * Return 0 if permission is granted.
> - * @inode_follow_link:
> - * Check permission to follow a symbolic link when looking up a pathname.
> - * @dentry contains the dentry structure for the link.
> - * @nd contains the nameidata structure for the parent directory.
> - * Return 0 if permission is granted.
> - * @inode_permission:
> - * Check permission before accessing an inode. This hook is called by the
> - * existing Linux permission function, so a security module can use it to
> - * provide additional checking for existing Linux permission checks.
> - * Notice that this hook is called when a file is opened (as well as many
> - * other operations), whereas the file_security_ops permission hook is
> - * called when the actual read/write operations are performed.
> - * @inode contains the inode structure to check.
> - * @mask contains the permission mask.
> - * Return 0 if permission is granted.
> - * @inode_setattr:
> - * Check permission before setting file attributes. Note that the kernel
> - * call to notify_change is performed from several locations, whenever
> - * file attributes change (such as when a file is truncated, chown/chmod
> - * operations, transferring disk quotas, etc).
> - * @dentry contains the dentry structure for the file.
> - * @attr is the iattr structure containing the new file attributes.
> - * Return 0 if permission is granted.
> - * @path_truncate:
> - * Check permission before truncating a file.
> - * @path contains the path structure for the file.
> - * Return 0 if permission is granted.
> - * @inode_getattr:
> - * Check permission before obtaining file attributes.
> - * @mnt is the vfsmount where the dentry was looked up
> - * @dentry contains the dentry structure for the file.
> - * Return 0 if permission is granted.
> - * @inode_setxattr:
> - * Check permission before setting the extended attributes
> - * @value identified by @name for @dentry.
> - * Return 0 if permission is granted.
> - * @inode_post_setxattr:
> - * Update inode security field after successful setxattr operation.
> - * @value identified by @name for @dentry.
> - * @inode_getxattr:
> - * Check permission before obtaining the extended attributes
> - * identified by @name for @dentry.
> - * Return 0 if permission is granted.
> - * @inode_listxattr:
> - * Check permission before obtaining the list of extended attribute
> - * names for @dentry.
> - * Return 0 if permission is granted.
> - * @inode_removexattr:
> - * Check permission before removing the extended attribute
> - * identified by @name for @dentry.
> - * Return 0 if permission is granted.
> - * @inode_getsecurity:
> - * Retrieve a copy of the extended attribute representation of the
> - * security label associated with @name for @inode via @buffer. Note that
> - * @name is the remainder of the attribute name after the security prefix
> - * has been removed. @alloc is used to specify of the call should return a
> - * value via the buffer or just the value length Return size of buffer on
> - * success.
> - * @inode_setsecurity:
> - * Set the security label associated with @name for @inode from the
> - * extended attribute value @value. @size indicates the size of the
> - * @value in bytes. @flags may be XATTR_CREATE, XATTR_REPLACE, or 0.
> - * Note that @name is the remainder of the attribute name after the
> - * security. prefix has been removed.
> - * Return 0 on success.
> - * @inode_listsecurity:
> - * Copy the extended attribute names for the security labels
> - * associated with @inode into @buffer. The maximum size of @buffer
> - * is specified by @buffer_size. @buffer may be NULL to request
> - * the size of the buffer required.
> - * Returns number of bytes used/required on success.
> - * @inode_need_killpriv:
> - * Called when an inode has been changed.
> - * @dentry is the dentry being changed.
> - * Return <0 on error to abort the inode change operation.
> - * Return 0 if inode_killpriv does not need to be called.
> - * Return >0 if inode_killpriv does need to be called.
> - * @inode_killpriv:
> - * The setuid bit is being removed. Remove similar security labels.
> - * Called with the dentry->d_inode->i_mutex held.
> - * @dentry is the dentry being changed.
> - * Return 0 on success. If error is returned, then the operation
> - * causing setuid bit removal is failed.
> - * @inode_getsecid:
> - * Get the secid associated with the node.
> - * @inode contains a pointer to the inode.
> - * @secid contains a pointer to the location where result will be saved.
> - * In case of failure, @secid will be set to zero.
> - *
> - * Security hooks for file operations
> - *
> - * @file_permission:
> - * Check file permissions before accessing an open file. This hook is
> - * called by various operations that read or write files. A security
> - * module can use this hook to perform additional checking on these
> - * operations, e.g. to revalidate permissions on use to support privilege
> - * bracketing or policy changes. Notice that this hook is used when the
> - * actual read/write operations are performed, whereas the
> - * inode_security_ops hook is called when a file is opened (as well as
> - * many other operations).
> - * Caveat: Although this hook can be used to revalidate permissions for
> - * various system call operations that read or write files, it does not
> - * address the revalidation of permissions for memory-mapped files.
> - * Security modules must handle this separately if they need such
> - * revalidation.
> - * @file contains the file structure being accessed.
> - * @mask contains the requested permissions.
> - * Return 0 if permission is granted.
> - * @file_alloc_security:
> - * Allocate and attach a security structure to the file->f_security field.
> - * The security field is initialized to NULL when the structure is first
> - * created.
> - * @file contains the file structure to secure.
> - * Return 0 if the hook is successful and permission is granted.
> - * @file_free_security:
> - * Deallocate and free any security structures stored in file->f_security.
> - * @file contains the file structure being modified.
> - * @file_ioctl:
> - * @file contains the file structure.
> - * @cmd contains the operation to perform.
> - * @arg contains the operational arguments.
> - * Check permission for an ioctl operation on @file. Note that @arg
> - * sometimes represents a user space pointer; in other cases, it may be a
> - * simple integer value. When @arg represents a user space pointer, it
> - * should never be used by the security module.
> - * Return 0 if permission is granted.
> - * @mmap_addr :
> - * Check permissions for a mmap operation at @addr.
> - * @addr contains virtual address that will be used for the operation.
> - * Return 0 if permission is granted.
> - * @mmap_file :
> - * Check permissions for a mmap operation. The @file may be NULL, e.g.
> - * if mapping anonymous memory.
> - * @file contains the file structure for file to map (may be NULL).
> - * @reqprot contains the protection requested by the application.
> - * @prot contains the protection that will be applied by the kernel.
> - * @flags contains the operational flags.
> - * Return 0 if permission is granted.
> - * @file_mprotect:
> - * Check permissions before changing memory access permissions.
> - * @vma contains the memory region to modify.
> - * @reqprot contains the protection requested by the application.
> - * @prot contains the protection that will be applied by the kernel.
> - * Return 0 if permission is granted.
> - * @file_lock:
> - * Check permission before performing file locking operations.
> - * Note: this hook mediates both flock and fcntl style locks.
> - * @file contains the file structure.
> - * @cmd contains the posix-translated lock operation to perform
> - * (e.g. F_RDLCK, F_WRLCK).
> - * Return 0 if permission is granted.
> - * @file_fcntl:
> - * Check permission before allowing the file operation specified by @cmd
> - * from being performed on the file @file. Note that @arg sometimes
> - * represents a user space pointer; in other cases, it may be a simple
> - * integer value. When @arg represents a user space pointer, it should
> - * never be used by the security module.
> - * @file contains the file structure.
> - * @cmd contains the operation to be performed.
> - * @arg contains the operational arguments.
> - * Return 0 if permission is granted.
> - * @file_set_fowner:
> - * Save owner security information (typically from current->security) in
> - * file->f_security for later use by the send_sigiotask hook.
> - * @file contains the file structure to update.
> - * Return 0 on success.
> - * @file_send_sigiotask:
> - * Check permission for the file owner @fown to send SIGIO or SIGURG to
the
> - * process @tsk. Note that this hook is sometimes called from interrupt.
> - * Note that the fown_struct, @fown, is never outside the context of a -
> * struct file, so the file structure (and associated security information)
> - * can always be obtained:
> - * container_of(fown, struct file, f_owner)
> - * @tsk contains the structure of task receiving signal.
> - * @fown contains the file owner information.
> - * @sig is the signal that will be sent. When 0, kernel sends SIGIO.
> - * Return 0 if permission is granted.
> - * @file_receive:
> - * This hook allows security modules to control the ability of a process
> - * to receive an open file descriptor via socket IPC.
> - * @file contains the file structure being received.
> - * Return 0 if permission is granted.
> - * @file_open
> - * Save open-time permission checking state for later use upon
> - * file_permission, and recheck access if anything has changed
> - * since inode_permission.
> - *
> - * Security hooks for task operations.
> - *
> - * @task_create:
> - * Check permission before creating a child process. See the clone(2)
> - * manual page for definitions of the @clone_flags.
> - * @clone_flags contains the flags indicating what should be shared.
> - * Return 0 if permission is granted.
> - * @task_free:
> - * @task task being freed
> - * Handle release of task-related resources. (Note that this can be called
> - * from interrupt context.)
> - * @cred_alloc_blank:
> - * @cred points to the credentials.
> - * @gfp indicates the atomicity of any memory allocations.
> - * Only allocate sufficient memory and attach to @cred such that
> - * cred_transfer() will not get ENOMEM.
> - * @cred_free:
> - * @cred points to the credentials.
> - * Deallocate and clear the cred->security field in a set of credentials.
> - * @cred_prepare:
> - * @new points to the new credentials.
> - * @old points to the original credentials.
> - * @gfp indicates the atomicity of any memory allocations.
> - * Prepare a new set of credentials by copying the data from the old set.
> - * @cred_transfer:
> - * @new points to the new credentials.
> - * @old points to the original credentials.
> - * Transfer data from original creds to new creds
> - * @kernel_act_as:
> - * Set the credentials for a kernel service to act as (subjective
context).
> - * @new points to the credentials to be modified.
> - * @secid specifies the security ID to be set
> - * The current task must be the one that nominated @secid.
> - * Return 0 if successful.
> - * @kernel_create_files_as:
> - * Set the file creation context in a set of credentials to be the same as
> - * the objective context of the specified inode.
> - * @new points to the credentials to be modified.
> - * @inode points to the inode to use as a reference.
> - * The current task must be the one that nominated @inode.
> - * Return 0 if successful.
> - * @kernel_fw_from_file:
> - * Load firmware from userspace (not called for built-in firmware).
> - * @file contains the file structure pointing to the file containing
> - * the firmware to load. This argument will be NULL if the firmware
> - * was loaded via the uevent-triggered blob-based interface exposed
> - * by CONFIG_FW_LOADER_USER_HELPER.
> - * @buf pointer to buffer containing firmware contents.
> - * @size length of the firmware contents.
> - * Return 0 if permission is granted.
> - * @kernel_module_request:
> - * Ability to trigger the kernel to automatically upcall to userspace for
> - * userspace to load a kernel module with the given name.
> - * @kmod_name name of the module requested by the kernel
> - * Return 0 if successful.
> - * @kernel_module_from_file:
> - * Load a kernel module from userspace.
> - * @file contains the file structure pointing to the file containing
> - * the kernel module to load. If the module is being loaded from a blob,
> - * this argument will be NULL.
> - * Return 0 if permission is granted.
> - * @task_fix_setuid:
> - * Update the module's state after setting one or more of the user
> - * identity attributes of the current process. The @flags parameter
> - * indicates which of the set*uid system calls invoked this hook. If
> - * @new is the set of credentials that will be installed. Modifications
> - * should be made to this rather than to @current->cred.
> - * @old is the set of credentials that are being replaces
> - * @flags contains one of the LSM_SETID_* values.
> - * Return 0 on success.
> - * @task_setpgid:
> - * Check permission before setting the process group identifier of the
> - * process @p to @pgid.
> - * @p contains the task_struct for process being modified.
> - * @pgid contains the new pgid.
> - * Return 0 if permission is granted.
> - * @task_getpgid:
> - * Check permission before getting the process group identifier of the
> - * process @p.
> - * @p contains the task_struct for the process.
> - * Return 0 if permission is granted.
> - * @task_getsid:
> - * Check permission before getting the session identifier of the process
> - * @p.
> - * @p contains the task_struct for the process.
> - * Return 0 if permission is granted.
> - * @task_getsecid:
> - * Retrieve the security identifier of the process @p.
> - * @p contains the task_struct for the process and place is into @secid.
> - * In case of failure, @secid will be set to zero.
> - *
> - * @task_setnice:
> - * Check permission before setting the nice value of @p to @nice.
> - * @p contains the task_struct of process.
> - * @nice contains the new nice value.
> - * Return 0 if permission is granted.
> - * @task_setioprio
> - * Check permission before setting the ioprio value of @p to @ioprio.
> - * @p contains the task_struct of process.
> - * @ioprio contains the new ioprio value
> - * Return 0 if permission is granted.
> - * @task_getioprio
> - * Check permission before getting the ioprio value of @p.
> - * @p contains the task_struct of process.
> - * Return 0 if permission is granted.
> - * @task_setrlimit:
> - * Check permission before setting the resource limits of the current
> - * process for @resource to @new_rlim. The old resource limit values can
> - * be examined by dereferencing (current->signal->rlim + resource).
> - * @resource contains the resource whose limit is being set.
> - * @new_rlim contains the new limits for @resource.
> - * Return 0 if permission is granted.
> - * @task_setscheduler:
> - * Check permission before setting scheduling policy and/or parameters of
> - * process @p based on @policy and @lp.
> - * @p contains the task_struct for process.
> - * @policy contains the scheduling policy.
> - * @lp contains the scheduling parameters.
> - * Return 0 if permission is granted.
> - * @task_getscheduler:
> - * Check permission before obtaining scheduling information for process
> - * @p.
> - * @p contains the task_struct for process.
> - * Return 0 if permission is granted.
> - * @task_movememory
> - * Check permission before moving memory owned by process @p.
> - * @p contains the task_struct for process.
> - * Return 0 if permission is granted.
> - * @task_kill:
> - * Check permission before sending signal @sig to @p. @info can be NULL,
> - * the constant 1, or a pointer to a siginfo structure. If @info is 1 or
> - * SI_FROMKERNEL(info) is true, then the signal should be viewed as coming
> - * from the kernel and should typically be permitted.
> - * SIGIO signals are handled separately by the send_sigiotask hook in
> - * file_security_ops.
> - * @p contains the task_struct for process.
> - * @info contains the signal information.
> - * @sig contains the signal value.
> - * @secid contains the sid of the process where the signal originated
> - * Return 0 if permission is granted.
> - * @task_wait:
> - * Check permission before allowing a process to reap a child process @p
> - * and collect its status information.
> - * @p contains the task_struct for process.
> - * Return 0 if permission is granted.
> - * @task_prctl:
> - * Check permission before performing a process control operation on the
> - * current process.
> - * @option contains the operation.
> - * @arg2 contains a argument.
> - * @arg3 contains a argument.
> - * @arg4 contains a argument.
> - * @arg5 contains a argument.
> - * Return -ENOSYS if no-one wanted to handle this op, any other value to
> - * cause prctl() to return immediately with that value.
> - * @task_to_inode:
> - * Set the security attributes for an inode based on an associated task's
> - * security attributes, e.g. for /proc/pid inodes.
> - * @p contains the task_struct for the task.
> - * @inode contains the inode structure for the inode.
> - *
> - * Security hooks for Netlink messaging.
> - *
> - * @netlink_send:
> - * Save security information for a netlink message so that permission
> - * checking can be performed when the message is processed. The security
> - * information can be saved using the eff_cap field of the
> - * netlink_skb_parms structure. Also may be used to provide fine
> - * grained control over message transmission.
> - * @sk associated sock of task sending the message.
> - * @skb contains the sk_buff structure for the netlink message.
> - * Return 0 if the information was successfully saved and message
> - * is allowed to be transmitted.
> - *
> - * Security hooks for Unix domain networking.
> - *
> - * @unix_stream_connect:
> - * Check permissions before establishing a Unix domain stream connection
> - * between @sock and @other.
> - * @sock contains the sock structure.
> - * @other contains the peer sock structure.
> - * @newsk contains the new sock structure.
> - * Return 0 if permission is granted.
> - * @unix_may_send:
> - * Check permissions before connecting or sending datagrams from @sock to
> - * @other.
> - * @sock contains the socket structure.
> - * @other contains the peer socket structure.
> - * Return 0 if permission is granted.
> - *
> - * The @unix_stream_connect and @unix_may_send hooks were necessary because
> - * Linux provides an alternative to the conventional file name space for
> Unix - * domain sockets. Whereas binding and connecting to sockets in the
> file name - * space is mediated by the typical file permissions (and caught
> by the mknod - * and permission hooks in inode_security_ops), binding and
> connecting to - * sockets in the abstract name space is completely
> unmediated. Sufficient - * control of Unix domain sockets in the abstract
> name space isn't possible - * using only the socket layer hooks, since we
> need to know the actual target - * socket, which is not looked up until we
> are inside the af_unix code. - *
> - * Security hooks for socket operations.
> - *
> - * @socket_create:
> - * Check permissions prior to creating a new socket.
> - * @family contains the requested protocol family.
> - * @type contains the requested communications type.
> - * @protocol contains the requested protocol.
> - * @kern set to 1 if a kernel socket.
> - * Return 0 if permission is granted.
> - * @socket_post_create:
> - * This hook allows a module to update or allocate a per-socket security
> - * structure. Note that the security field was not added directly to the
> - * socket structure, but rather, the socket security information is stored
> - * in the associated inode. Typically, the inode alloc_security hook will
> - * allocate and and attach security information to
> - * sock->inode->i_security. This hook may be used to update the
> - * sock->inode->i_security field with additional information that wasn't
> - * available when the inode was allocated.
> - * @sock contains the newly created socket structure.
> - * @family contains the requested protocol family.
> - * @type contains the requested communications type.
> - * @protocol contains the requested protocol.
> - * @kern set to 1 if a kernel socket.
> - * @socket_bind:
> - * Check permission before socket protocol layer bind operation is
> - * performed and the socket @sock is bound to the address specified in the
> - * @address parameter.
> - * @sock contains the socket structure.
> - * @address contains the address to bind to.
> - * @addrlen contains the length of address.
> - * Return 0 if permission is granted.
> - * @socket_connect:
> - * Check permission before socket protocol layer connect operation
> - * attempts to connect socket @sock to a remote address, @address.
> - * @sock contains the socket structure.
> - * @address contains the address of remote endpoint.
> - * @addrlen contains the length of address.
> - * Return 0 if permission is granted.
> - * @socket_listen:
> - * Check permission before socket protocol layer listen operation.
> - * @sock contains the socket structure.
> - * @backlog contains the maximum length for the pending connection queue.
> - * Return 0 if permission is granted.
> - * @socket_accept:
> - * Check permission before accepting a new connection. Note that the new
> - * socket, @newsock, has been created and some information copied to it,
> - * but the accept operation has not actually been performed.
> - * @sock contains the listening socket structure.
> - * @newsock contains the newly created server socket for connection.
> - * Return 0 if permission is granted.
> - * @socket_sendmsg:
> - * Check permission before transmitting a message to another socket.
> - * @sock contains the socket structure.
> - * @msg contains the message to be transmitted.
> - * @size contains the size of message.
> - * Return 0 if permission is granted.
> - * @socket_recvmsg:
> - * Check permission before receiving a message from a socket.
> - * @sock contains the socket structure.
> - * @msg contains the message structure.
> - * @size contains the size of message structure.
> - * @flags contains the operational flags.
> - * Return 0 if permission is granted.
> - * @socket_getsockname:
> - * Check permission before the local address (name) of the socket object
> - * @sock is retrieved.
> - * @sock contains the socket structure.
> - * Return 0 if permission is granted.
> - * @socket_getpeername:
> - * Check permission before the remote address (name) of a socket object
> - * @sock is retrieved.
> - * @sock contains the socket structure.
> - * Return 0 if permission is granted.
> - * @socket_getsockopt:
> - * Check permissions before retrieving the options associated with socket
> - * @sock.
> - * @sock contains the socket structure.
> - * @level contains the protocol level to retrieve option from.
> - * @optname contains the name of option to retrieve.
> - * Return 0 if permission is granted.
> - * @socket_setsockopt:
> - * Check permissions before setting the options associated with socket
> - * @sock.
> - * @sock contains the socket structure.
> - * @level contains the protocol level to set options for.
> - * @optname contains the name of the option to set.
> - * Return 0 if permission is granted.
> - * @socket_shutdown:
> - * Checks permission before all or part of a connection on the socket
> - * @sock is shut down.
> - * @sock contains the socket structure.
> - * @how contains the flag indicating how future sends and receives are
> handled. - * Return 0 if permission is granted.
> - * @socket_sock_rcv_skb:
> - * Check permissions on incoming network packets. This hook is distinct
> - * from Netfilter's IP input hooks since it is the first time that the
> - * incoming sk_buff @skb has been associated with a particular socket,
@sk.
> - * Must not sleep inside this hook because some callers hold spinlocks. -
> * @sk contains the sock (not socket) associated with the incoming sk_buff.
> - * @skb contains the incoming network data.
> - * @socket_getpeersec_stream:
> - * This hook allows the security module to provide peer socket security
> - * state for unix or connected tcp sockets to userspace via getsockopt
> - * SO_GETPEERSEC. For tcp sockets this can be meaningful if the
> - * socket is associated with an ipsec SA.
> - * @sock is the local socket.
> - * @optval userspace memory where the security state is to be copied.
> - * @optlen userspace int where the module should copy the actual length
> - * of the security state.
> - * @len as input is the maximum length to copy to userspace provided
> - * by the caller.
> - * Return 0 if all is well, otherwise, typical getsockopt return
> - * values.
> - * @socket_getpeersec_dgram:
> - * This hook allows the security module to provide peer socket security
> - * state for udp sockets on a per-packet basis to userspace via
> - * getsockopt SO_GETPEERSEC. The application must first have indicated
> - * the IP_PASSSEC option via getsockopt. It can then retrieve the
> - * security state returned by this hook for a packet via the SCM_SECURITY
> - * ancillary message type.
> - * @skb is the skbuff for the packet being queried
> - * @secdata is a pointer to a buffer in which to copy the security data
> - * @seclen is the maximum length for @secdata
> - * Return 0 on success, error on failure.
> - * @sk_alloc_security:
> - * Allocate and attach a security structure to the sk->sk_security field,
> - * which is used to copy security attributes between local stream sockets.
> - * @sk_free_security:
> - * Deallocate security structure.
> - * @sk_clone_security:
> - * Clone/copy security structure.
> - * @sk_getsecid:
> - * Retrieve the LSM-specific secid for the sock to enable caching of
> network - * authorizations.
> - * @sock_graft:
> - * Sets the socket's isec sid to the sock's sid.
> - * @inet_conn_request:
> - * Sets the openreq's sid to socket's sid with MLS portion taken from peer
> sid. - * @inet_csk_clone:
> - * Sets the new child socket's sid to the openreq sid.
> - * @inet_conn_established:
> - * Sets the connection's peersid to the secmark on skb.
> - * @secmark_relabel_packet:
> - * check if the process should be allowed to relabel packets to the given
> secid - * @security_secmark_refcount_inc
> - * tells the LSM to increment the number of secmark labeling rules loaded
> - * @security_secmark_refcount_dec
> - * tells the LSM to decrement the number of secmark labeling rules loaded
> - * @req_classify_flow:
> - * Sets the flow's sid to the openreq sid.
> - * @tun_dev_alloc_security:
> - * This hook allows a module to allocate a security structure for a TUN
> - * device.
> - * @security pointer to a security structure pointer.
> - * Returns a zero on success, negative values on failure.
> - * @tun_dev_free_security:
> - * This hook allows a module to free the security structure for a TUN
> - * device.
> - * @security pointer to the TUN device's security structure
> - * @tun_dev_create:
> - * Check permissions prior to creating a new TUN device.
> - * @tun_dev_attach_queue:
> - * Check permissions prior to attaching to a TUN device queue.
> - * @security pointer to the TUN device's security structure.
> - * @tun_dev_attach:
> - * This hook can be used by the module to update any security state
> - * associated with the TUN device's sock structure.
> - * @sk contains the existing sock structure.
> - * @security pointer to the TUN device's security structure.
> - * @tun_dev_open:
> - * This hook can be used by the module to update any security state
> - * associated with the TUN device's security structure.
> - * @security pointer to the TUN devices's security structure.
> - * @skb_owned_by:
> - * This hook sets the packet's owning sock.
> - * @skb is the packet.
> - * @sk the sock which owns the packet.
> - *
> - * Security hooks for XFRM operations.
> - *
> - * @xfrm_policy_alloc_security:
> - * @ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy
> - * Database used by the XFRM system.
> - * @sec_ctx contains the security context information being provided by
> - * the user-level policy update program (e.g., setkey).
> - * Allocate a security structure to the xp->security field; the security
> - * field is initialized to NULL when the xfrm_policy is allocated.
> - * Return 0 if operation was successful (memory to allocate, legal
context)
> - * @gfp is to specify the context for the allocation
> - * @xfrm_policy_clone_security:
> - * @old_ctx contains an existing xfrm_sec_ctx.
> - * @new_ctxp contains a new xfrm_sec_ctx being cloned from old.
> - * Allocate a security structure in new_ctxp that contains the
> - * information from the old_ctx structure.
> - * Return 0 if operation was successful (memory to allocate).
> - * @xfrm_policy_free_security:
> - * @ctx contains the xfrm_sec_ctx
> - * Deallocate xp->security.
> - * @xfrm_policy_delete_security:
> - * @ctx contains the xfrm_sec_ctx.
> - * Authorize deletion of xp->security.
> - * @xfrm_state_alloc:
> - * @x contains the xfrm_state being added to the Security Association
> - * Database by the XFRM system.
> - * @sec_ctx contains the security context information being provided by
> - * the user-level SA generation program (e.g., setkey or racoon).
> - * Allocate a security structure to the x->security field; the security
> - * field is initialized to NULL when the xfrm_state is allocated. Set the
> - * context to correspond to sec_ctx. Return 0 if operation was successful
> - * (memory to allocate, legal context).
> - * @xfrm_state_alloc_acquire:
> - * @x contains the xfrm_state being added to the Security Association
> - * Database by the XFRM system.
> - * @polsec contains the policy's security context.
> - * @secid contains the secid from which to take the mls portion of the
> - * context.
> - * Allocate a security structure to the x->security field; the security
> - * field is initialized to NULL when the xfrm_state is allocated. Set the
> - * context to correspond to secid. Return 0 if operation was successful
> - * (memory to allocate, legal context).
> - * @xfrm_state_free_security:
> - * @x contains the xfrm_state.
> - * Deallocate x->security.
> - * @xfrm_state_delete_security:
> - * @x contains the xfrm_state.
> - * Authorize deletion of x->security.
> - * @xfrm_policy_lookup:
> - * @ctx contains the xfrm_sec_ctx for which the access control is being
> - * checked.
> - * @fl_secid contains the flow security label that is used to authorize
> - * access to the policy xp.
> - * @dir contains the direction of the flow (input or output).
> - * Check permission when a flow selects a xfrm_policy for processing
> - * XFRMs on a packet. The hook is called when selecting either a
> - * per-socket policy or a generic xfrm policy.
> - * Return 0 if permission is granted, -ESRCH otherwise, or -errno
> - * on other errors.
> - * @xfrm_state_pol_flow_match:
> - * @x contains the state to match.
> - * @xp contains the policy to check for a match.
> - * @fl contains the flow to check for a match.
> - * Return 1 if there is a match.
> - * @xfrm_decode_session:
> - * @skb points to skb to decode.
> - * @secid points to the flow key secid to set.
> - * @ckall says if all xfrms used should be checked for same secid.
> - * Return 0 if ckall is zero or all xfrms used have the same secid.
> - *
> - * Security hooks affecting all Key Management operations
> - *
> - * @key_alloc:
> - * Permit allocation of a key and assign security data. Note that key does
> - * not have a serial number assigned at this point.
> - * @key points to the key.
> - * @flags is the allocation flags
> - * Return 0 if permission is granted, -ve error otherwise.
> - * @key_free:
> - * Notification of destruction; free security data.
> - * @key points to the key.
> - * No return value.
> - * @key_permission:
> - * See whether a specific operational right is granted to a process on a
> - * key.
> - * @key_ref refers to the key (key pointer + possession attribute bit).
> - * @cred points to the credentials to provide the context against which to
> - * evaluate the security data on the key.
> - * @perm describes the combination of permissions required of this key.
> - * Return 0 if permission is granted, -ve error otherwise.
> - * @key_getsecurity:
> - * Get a textual representation of the security context attached to a key
> - * for the purposes of honouring KEYCTL_GETSECURITY. This function
> - * allocates the storage for the NUL-terminated string and the caller
> - * should free it.
> - * @key points to the key to be queried.
> - * @_buffer points to a pointer that should be set to point to the
> - * resulting string (if no label or an error occurs).
> - * Return the length of the string (including terminating NUL) or -ve if
> - * an error.
> - * May also return 0 (and a NULL buffer pointer) if there is no label.
> - *
> - * Security hooks affecting all System V IPC operations.
> - *
> - * @ipc_permission:
> - * Check permissions for access to IPC
> - * @ipcp contains the kernel IPC permission structure
> - * @flag contains the desired (requested) permission set
> - * Return 0 if permission is granted.
> - * @ipc_getsecid:
> - * Get the secid associated with the ipc object.
> - * @ipcp contains the kernel IPC permission structure.
> - * @secid contains a pointer to the location where result will be saved.
> - * In case of failure, @secid will be set to zero.
> - *
> - * Security hooks for individual messages held in System V IPC message
> queues - * @msg_msg_alloc_security:
> - * Allocate and attach a security structure to the msg->security field.
> - * The security field is initialized to NULL when the structure is first
> - * created.
> - * @msg contains the message structure to be modified.
> - * Return 0 if operation was successful and permission is granted.
> - * @msg_msg_free_security:
> - * Deallocate the security structure for this message.
> - * @msg contains the message structure to be modified.
> - *
> - * Security hooks for System V IPC Message Queues
> - *
> - * @msg_queue_alloc_security:
> - * Allocate and attach a security structure to the
> - * msq->q_perm.security field. The security field is initialized to
> - * NULL when the structure is first created.
> - * @msq contains the message queue structure to be modified.
> - * Return 0 if operation was successful and permission is granted.
> - * @msg_queue_free_security:
> - * Deallocate security structure for this message queue.
> - * @msq contains the message queue structure to be modified.
> - * @msg_queue_associate:
> - * Check permission when a message queue is requested through the
> - * msgget system call. This hook is only called when returning the
> - * message queue identifier for an existing message queue, not when a
> - * new message queue is created.
> - * @msq contains the message queue to act upon.
> - * @msqflg contains the operation control flags.
> - * Return 0 if permission is granted.
> - * @msg_queue_msgctl:
> - * Check permission when a message control operation specified by @cmd
> - * is to be performed on the message queue @msq.
> - * The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO.
> - * @msq contains the message queue to act upon. May be NULL.
> - * @cmd contains the operation to be performed.
> - * Return 0 if permission is granted.
> - * @msg_queue_msgsnd:
> - * Check permission before a message, @msg, is enqueued on the message
> - * queue, @msq.
> - * @msq contains the message queue to send message to.
> - * @msg contains the message to be enqueued.
> - * @msqflg contains operational flags.
> - * Return 0 if permission is granted.
> - * @msg_queue_msgrcv:
> - * Check permission before a message, @msg, is removed from the message
> - * queue, @msq. The @target task structure contains a pointer to the
> - * process that will be receiving the message (not equal to the current
> - * process when inline receives are being performed).
> - * @msq contains the message queue to retrieve message from.
> - * @msg contains the message destination.
> - * @target contains the task structure for recipient process.
> - * @type contains the type of message requested.
> - * @mode contains the operational flags.
> - * Return 0 if permission is granted.
> - *
> - * Security hooks for System V Shared Memory Segments
> - *
> - * @shm_alloc_security:
> - * Allocate and attach a security structure to the shp->shm_perm.security
> - * field. The security field is initialized to NULL when the structure is
> - * first created.
> - * @shp contains the shared memory structure to be modified.
> - * Return 0 if operation was successful and permission is granted.
> - * @shm_free_security:
> - * Deallocate the security struct for this memory segment.
> - * @shp contains the shared memory structure to be modified.
> - * @shm_associate:
> - * Check permission when a shared memory region is requested through the
> - * shmget system call. This hook is only called when returning the shared
> - * memory region identifier for an existing region, not when a new shared
> - * memory region is created.
> - * @shp contains the shared memory structure to be modified.
> - * @shmflg contains the operation control flags.
> - * Return 0 if permission is granted.
> - * @shm_shmctl:
> - * Check permission when a shared memory control operation specified by
> - * @cmd is to be performed on the shared memory region @shp.
> - * The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO.
> - * @shp contains shared memory structure to be modified.
> - * @cmd contains the operation to be performed.
> - * Return 0 if permission is granted.
> - * @shm_shmat:
> - * Check permissions prior to allowing the shmat system call to attach the
> - * shared memory segment @shp to the data segment of the calling process.
> - * The attaching address is specified by @shmaddr.
> - * @shp contains the shared memory structure to be modified.
> - * @shmaddr contains the address to attach memory region to.
> - * @shmflg contains the operational flags.
> - * Return 0 if permission is granted.
> - *
> - * Security hooks for System V Semaphores
> - *
> - * @sem_alloc_security:
> - * Allocate and attach a security structure to the sma->sem_perm.security
> - * field. The security field is initialized to NULL when the structure is
> - * first created.
> - * @sma contains the semaphore structure
> - * Return 0 if operation was successful and permission is granted.
> - * @sem_free_security:
> - * deallocate security struct for this semaphore
> - * @sma contains the semaphore structure.
> - * @sem_associate:
> - * Check permission when a semaphore is requested through the semget
> - * system call. This hook is only called when returning the semaphore
> - * identifier for an existing semaphore, not when a new one must be
> - * created.
> - * @sma contains the semaphore structure.
> - * @semflg contains the operation control flags.
> - * Return 0 if permission is granted.
> - * @sem_semctl:
> - * Check permission when a semaphore operation specified by @cmd is to be
> - * performed on the semaphore @sma. The @sma may be NULL, e.g. for
> - * IPC_INFO or SEM_INFO.
> - * @sma contains the semaphore structure. May be NULL.
> - * @cmd contains the operation to be performed.
> - * Return 0 if permission is granted.
> - * @sem_semop
> - * Check permissions before performing operations on members of the
> - * semaphore set @sma. If the @alter flag is nonzero, the semaphore set
> - * may be modified.
> - * @sma contains the semaphore structure.
> - * @sops contains the operations to perform.
> - * @nsops contains the number of operations to perform.
> - * @alter contains the flag indicating whether changes are to be made.
> - * Return 0 if permission is granted.
> - *
> - * @binder_set_context_mgr
> - * Check whether @mgr is allowed to be the binder context manager.
> - * @mgr contains the task_struct for the task being registered.
> - * Return 0 if permission is granted.
> - * @binder_transaction
> - * Check whether @from is allowed to invoke a binder transaction call
> - * to @to.
> - * @from contains the task_struct for the sending task.
> - * @to contains the task_struct for the receiving task.
> - * @binder_transfer_binder
> - * Check whether @from is allowed to transfer a binder reference to @to.
> - * @from contains the task_struct for the sending task.
> - * @to contains the task_struct for the receiving task.
> - * @binder_transfer_file
> - * Check whether @from is allowed to transfer @file to @to.
> - * @from contains the task_struct for the sending task.
> - * @file contains the struct file being transferred.
> - * @to contains the task_struct for the receiving task.
> - *
> - * @ptrace_access_check:
> - * Check permission before allowing the current process to trace the
> - * @child process.
> - * Security modules may also want to perform a process tracing check
> - * during an execve in the set_security or apply_creds hooks of
> - * tracing check during an execve in the bprm_set_creds hook of
> - * binprm_security_ops if the process is being traced and its security
> - * attributes would be changed by the execve.
> - * @child contains the task_struct structure for the target process.
> - * @mode contains the PTRACE_MODE flags indicating the form of access.
> - * Return 0 if permission is granted.
> - * @ptrace_traceme:
> - * Check that the @parent process has sufficient permission to trace the
> - * current process before allowing the current process to present itself
> - * to the @parent process for tracing.
> - * @parent contains the task_struct structure for debugger process.
> - * Return 0 if permission is granted.
> - * @capget:
> - * Get the @effective, @inheritable, and @permitted capability sets for
> - * the @target process. The hook may also perform permission checking to
> - * determine if the current process is allowed to see the capability sets
> - * of the @target process.
> - * @target contains the task_struct structure for target process.
> - * @effective contains the effective capability set.
> - * @inheritable contains the inheritable capability set.
> - * @permitted contains the permitted capability set.
> - * Return 0 if the capability sets were successfully obtained.
> - * @capset:
> - * Set the @effective, @inheritable, and @permitted capability sets for
> - * the current process.
> - * @new contains the new credentials structure for target process.
> - * @old contains the current credentials structure for target process.
> - * @effective contains the effective capability set.
> - * @inheritable contains the inheritable capability set.
> - * @permitted contains the permitted capability set.
> - * Return 0 and update @new if permission is granted.
> - * @capable:
> - * Check whether the @tsk process has the @cap capability in the indicated
> - * credentials.
> - * @cred contains the credentials to use.
> - * @ns contains the user namespace we want the capability in
> - * @cap contains the capability <include/linux/capability.h>.
> - * @audit: Whether to write an audit message or not
> - * Return 0 if the capability is granted for @tsk.
> - * @syslog:
> - * Check permission before accessing the kernel message ring or changing
> - * logging to the console.
> - * See the syslog(2) manual page for an explanation of the @type values.
> - * @type contains the type of action.
> - * @from_file indicates the context of action (if it came from /proc).
> - * Return 0 if permission is granted.
> - * @settime:
> - * Check permission to change the system time.
> - * struct timespec and timezone are defined in include/linux/time.h
> - * @ts contains new time
> - * @tz contains new timezone
> - * Return 0 if permission is granted.
> - * @vm_enough_memory:
> - * Check permissions for allocating a new virtual mapping.
> - * @mm contains the mm struct it is being added to.
> - * @pages contains the number of pages.
> - * Return 0 if permission is granted.
> - *
> - * @ismaclabel:
> - * Check if the extended attribute specified by @name
> - * represents a MAC label. Returns 1 if name is a MAC
> - * attribute otherwise returns 0.
> - * @name full extended attribute name to check against
> - * LSM as a MAC label.
> - *
> - * @secid_to_secctx:
> - * Convert secid to security context. If secdata is NULL the length of
> - * the result will be returned in seclen, but no secdata will be returned.
> - * This does mean that the length could change between calls to check the
> - * length and the next call which actually allocates and returns the
> secdata. - * @secid contains the security ID.
> - * @secdata contains the pointer that stores the converted security
> context. - * @seclen pointer which contains the length of the data
> - * @secctx_to_secid:
> - * Convert security context to secid.
> - * @secid contains the pointer to the generated security ID.
> - * @secdata contains the security context.
> - *
> - * @release_secctx:
> - * Release the security context.
> - * @secdata contains the security context.
> - * @seclen contains the length of the security context.
> - *
> - * Security hooks for Audit
> - *
> - * @audit_rule_init:
> - * Allocate and initialize an LSM audit rule structure.
> - * @field contains the required Audit action. Fields flags are defined in
> include/linux/audit.h - * @op contains the operator the rule uses.
> - * @rulestr contains the context where the rule will be applied to.
> - * @lsmrule contains a pointer to receive the result.
> - * Return 0 if @lsmrule has been successfully set,
> - * -EINVAL in case of an invalid rule.
> - *
> - * @audit_rule_known:
> - * Specifies whether given @rule contains any fields related to current
> LSM. - * @rule contains the audit rule of interest.
> - * Return 1 in case of relation found, 0 otherwise.
> - *
> - * @audit_rule_match:
> - * Determine if given @secid matches a rule previously approved
> - * by @audit_rule_known.
> - * @secid contains the security id in question.
> - * @field contains the field which relates to current LSM.
> - * @op contains the operator that will be used for matching.
> - * @rule points to the audit rule that will be checked against.
> - * @actx points to the audit context associated with the check.
> - * Return 1 if secid matches the rule, 0 if it does not, -ERRNO on
failure.
> - *
> - * @audit_rule_free:
> - * Deallocate the LSM audit rule structure previously allocated by
> - * audit_rule_init.
> - * @rule contains the allocated rule
> - *
> - * @inode_notifysecctx:
> - * Notify the security module of what the security context of an inode
> - * should be. Initializes the incore security context managed by the
> - * security module for this inode. Example usage: NFS client invokes
> - * this hook to initialize the security context in its incore inode to the
> - * value provided by the server for the file when the server returned the
> - * file's attributes to the client.
> - *
> - * Must be called with inode->i_mutex locked.
> - *
> - * @inode we wish to set the security context of.
> - * @ctx contains the string which we wish to set in the inode.
> - * @ctxlen contains the length of @ctx.
> - *
> - * @inode_setsecctx:
> - * Change the security context of an inode. Updates the
> - * incore security context managed by the security module and invokes the
> - * fs code as needed (via __vfs_setxattr_noperm) to update any backing
> - * xattrs that represent the context. Example usage: NFS server invokes
> - * this hook to change the security context in its incore inode and on the
> - * backing filesystem to a value provided by the client on a SETATTR - *
> operation.
> - *
> - * Must be called with inode->i_mutex locked.
> - *
> - * @dentry contains the inode we wish to set the security context of.
> - * @ctx contains the string which we wish to set in the inode.
> - * @ctxlen contains the length of @ctx.
> - *
> - * @inode_getsecctx:
> - * On success, returns 0 and fills out @ctx and @ctxlen with the security
> - * context for the given @inode.
> - *
> - * @inode we wish to get the security context of.
> - * @ctx is a pointer in which to place the allocated security context.
> - * @ctxlen points to the place to put the length of @ctx.
> - * This is the main security structure.
> - */
> -
> /* prototypes */
> extern int security_init(void);
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe
> linux-security-module" in the body of a message to
> majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
paul moore
security @ redhat



\
 
 \ /
  Last update: 2015-05-07 23:21    [W:0.211 / U:2.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site