lkml.org 
[lkml]   [2015]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 13/19] clk: ti: Silence sparse warnings
On 05/06/2015 11:15 AM, Peter Ujfalusi wrote:
> On 05/06/2015 10:39 AM, Stephen Boyd wrote:
>> drivers/clk/ti/clk.c:125:31: warning: incorrect type in return expression (different address spaces)
>> drivers/clk/ti/clk.c:125:31: expected void [noderef] <asn:2>*
>> drivers/clk/ti/clk.c:125:31: got void *
>> drivers/clk/ti/clk.c:132:31: warning: incorrect type in return expression (different address spaces)
>> drivers/clk/ti/clk.c:132:31: expected void [noderef] <asn:2>*
>> drivers/clk/ti/clk.c:132:31: got void *
>> drivers/clk/ti/dpll.c:180:14: warning: symbol '_get_reg' was not declared. Should it be static?
>> drivers/clk/ti/fapll.c:624:32: warning: Using plain integer as NULL pointer
>> drivers/clk/ti/fapll.c:625:31: warning: Using plain integer as NULL pointer
>> drivers/clk/ti/fapll.c:630:40: warning: Using plain integer as NULL pointer
>> drivers/clk/ti/clk-dra7-atl.c:158:22: warning: symbol 'atl_clk_ops' was not declared. Should it be static?
>> drivers/clk/ti/clk-dra7-atl.c:170:39: warning: Using plain integer as NULL pointer
>>
>> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> Cc: Tero Kristo <t-kristo@ti.com>
>> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
>
> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Yes looks good to me also.

Acked-by: Tero Kristo <t-kristo@ti.com>

>
>> ---
>> drivers/clk/ti/clk-dra7-atl.c | 4 ++--
>> drivers/clk/ti/clk.c | 4 ++--
>> drivers/clk/ti/dpll.c | 2 +-
>> drivers/clk/ti/fapll.c | 6 +++---
>> 4 files changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c
>> index d86bc46b93bd..1fe7429a7536 100644
>> --- a/drivers/clk/ti/clk-dra7-atl.c
>> +++ b/drivers/clk/ti/clk-dra7-atl.c
>> @@ -155,7 +155,7 @@ static int atl_clk_set_rate(struct clk_hw *hw, unsigned long rate,
>> return 0;
>> }
>>
>> -const struct clk_ops atl_clk_ops = {
>> +static const struct clk_ops atl_clk_ops = {
>> .enable = atl_clk_enable,
>> .disable = atl_clk_disable,
>> .is_enabled = atl_clk_is_enabled,
>> @@ -167,7 +167,7 @@ const struct clk_ops atl_clk_ops = {
>> static void __init of_dra7_atl_clock_setup(struct device_node *node)
>> {
>> struct dra7_atl_desc *clk_hw = NULL;
>> - struct clk_init_data init = { 0 };
>> + struct clk_init_data init = { NULL };
>> const char **parent_names = NULL;
>> struct clk *clk;
>>
>> diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
>> index 0ebe5c51062b..64bb5e8a3b8c 100644
>> --- a/drivers/clk/ti/clk.c
>> +++ b/drivers/clk/ti/clk.c
>> @@ -122,14 +122,14 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
>>
>> if (i == CLK_MAX_MEMMAPS) {
>> pr_err("clk-provider not found for %s!\n", node->name);
>> - return ERR_PTR(-ENOENT);
>> + return IOMEM_ERR_PTR(-ENOENT);
>> }
>>
>> reg->index = i;
>>
>> if (of_property_read_u32_index(node, "reg", index, &val)) {
>> pr_err("%s must have reg[%d]!\n", node->name, index);
>> - return ERR_PTR(-EINVAL);
>> + return IOMEM_ERR_PTR(-EINVAL);
>> }
>>
>> reg->offset = val;
>> diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
>> index 11478a501c30..2aacf7a3bcae 100644
>> --- a/drivers/clk/ti/dpll.c
>> +++ b/drivers/clk/ti/dpll.c
>> @@ -177,7 +177,7 @@ cleanup:
>> }
>>
>> #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_ATAGS)
>> -void __iomem *_get_reg(u8 module, u16 offset)
>> +static void __iomem *_get_reg(u8 module, u16 offset)
>> {
>> u32 reg;
>> struct clk_omap_reg *reg_setup;
>> diff --git a/drivers/clk/ti/fapll.c b/drivers/clk/ti/fapll.c
>> index ffcd8e09e85b..730aa62454a2 100644
>> --- a/drivers/clk/ti/fapll.c
>> +++ b/drivers/clk/ti/fapll.c
>> @@ -621,13 +621,13 @@ static void __init ti_fapll_setup(struct device_node *node)
>>
>> /* Check for hardwired audio_pll_clk1 */
>> if (is_audio_pll_clk1(freq)) {
>> - freq = 0;
>> - div = 0;
>> + freq = NULL;
>> + div = NULL;
>> } else {
>> /* Does the synthesizer have a FREQ register? */
>> v = readl_relaxed(freq);
>> if (!v)
>> - freq = 0;
>> + freq = NULL;
>> }
>> synth_clk = ti_fapll_synth_setup(fd, freq, div, output_instance,
>> output_name, node->name,
>>
>
>



\
 
 \ /
  Last update: 2015-05-07 10:41    [W:0.137 / U:4.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site