lkml.org 
[lkml]   [2015]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 06/10] mtd: brcmstb_nand: add SoC-specific support
Date
On Wednesday 06 May 2015 10:59:50 Brian Norris wrote:
> + /*
> + * Some SoCs integrate this controller (e.g., its interrupt bits) in
> + * interesting ways
> + */
> + if (of_property_read_bool(dn, "brcm,nand-soc")) {
> + struct device_node *soc_dn;
> +
> + soc_dn = of_parse_phandle(dn, "brcm,nand-soc", 0);
> + if (!soc_dn)
> + return -ENODEV;
> +
> + ctrl->soc = devm_brcmnand_probe_soc(dev, soc_dn);
> + if (!ctrl->soc) {
> + dev_err(dev, "could not probe SoC data\n");
> + of_node_put(soc_dn);
> + return -ENODEV;
> + }
> +
> + ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
> + DRV_NAME, ctrl);
> +
> + /* Enable interrupt */
> + ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
> +
> + of_node_put(soc_dn);
> + } else {
> + /* Use standard interrupt infrastructure */
> + ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
> + DRV_NAME, ctrl);
> + }
>

It looks to me like this should be handled as a nested irqchip, so the node
you look up gets used as the "interrupt-parent" instead, making the behavior
of this SoC transparent to the nand driver.

We recently merged nested irqdomain support as well, which might help here,
or might not be needed.

Arnd



\
 
 \ /
  Last update: 2015-05-06 21:21    [W:0.126 / U:24.872 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site