lkml.org 
[lkml]   [2015]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc: atmel-mci: fix bad variable type for clkdiv
Date
clkdiv is declared as an u32 but it can be set to a negative value
causing a huge divisor value. Change its type to int to avoid this case.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: <stable@vger.kernel.org> # 3.4 and later
---
drivers/mmc/host/atmel-mci.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 03d7c75..9a39e0b 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1304,7 +1304,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)

if (ios->clock) {
unsigned int clock_min = ~0U;
- u32 clkdiv;
+ int clkdiv;

spin_lock_bh(&host->lock);
if (!host->mode_reg) {
@@ -1328,7 +1328,12 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
/* Calculate clock divider */
if (host->caps.has_odd_clk_div) {
clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
- if (clkdiv > 511) {
+ if (clkdiv < 0) {
+ dev_warn(&mmc->class_dev,
+ "clock %u too fast; using %lu\n",
+ clock_min, host->bus_hz / 2);
+ clkdiv = 0;
+ } else if (clkdiv > 511) {
dev_warn(&mmc->class_dev,
"clock %u too slow; using %lu\n",
clock_min, host->bus_hz / (511 + 2));
--
2.2.0


\
 
 \ /
  Last update: 2015-05-06 16:01    [W:0.049 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site