lkml.org 
[lkml]   [2015]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 2/2] regulator: max8973: get rid of extra variable for gpio validity
Date
To find that dvs-gpio is valid or not, gpio API gpio_is_valid()
can be directly used instead of intermediate variable.

Removing the extra variable and using the gpio_is_valid().

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
This patch is applied earlier but not able to apply on latest
so sending it again.

drivers/regulator/max8973-regulator.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 3df5a84..190db9c 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -100,7 +100,6 @@ struct max8973_chip {
int curr_vout_val[MAX8973_MAX_VOUT_REG];
int curr_vout_reg;
int curr_gpio_val;
- bool valid_dvs_gpio;
struct regulator_ops ops;
};

@@ -174,7 +173,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
* If gpios are available to select the VOUT register then least
* recently used register for new configuration.
*/
- if (max->valid_dvs_gpio)
+ if (gpio_is_valid(max->dvs_gpio))
found = find_voltage_set_register(max, vsel,
&vout_reg, &gpio_val);

@@ -191,7 +190,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
}

/* Select proper VOUT register vio gpios */
- if (max->valid_dvs_gpio) {
+ if (gpio_is_valid(max->dvs_gpio)) {
gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1);
max->curr_gpio_val = gpio_val;
}
@@ -438,7 +437,6 @@ static int max8973_probe(struct i2c_client *client,
max->dvs_gpio, ret);
return ret;
}
- max->valid_dvs_gpio = true;

/*
* Initialize the lru index with vout_reg id
@@ -448,8 +446,6 @@ static int max8973_probe(struct i2c_client *client,
max->lru_index[i] = i;
max->lru_index[0] = max->curr_vout_reg;
max->lru_index[max->curr_vout_reg] = 0;
- } else {
- max->valid_dvs_gpio = false;
}

if (pdata) {
--
2.1.4


\
 
 \ /
  Last update: 2015-05-06 15:21    [W:0.291 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site