lkml.org 
[lkml]   [2015]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] serial: 8250: Do nothing if nr_uarts=0
When nr_uarts was set to 0 (via config or 8250_core.nr_uarts), we crash
early on x86 because serial8250_isa_init_ports dereferences base_ops
which remains NULL. In fact, there is nothing to do for all the callers
of serial8250_isa_init_ports if there are no uarts.

Based on suggestions by Peter Hurley.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---

This supersedes "serial: 8250: Prevent kernel crash with nr_uarts=0"

drivers/tty/serial/8250/8250_core.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 4506e40..dfcb14f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3548,6 +3548,9 @@ static struct console univ8250_console = {

static int __init univ8250_console_init(void)
{
+ if (nr_uarts == 0)
+ return -ENODEV;
+
serial8250_isa_init_ports();
register_console(&univ8250_console);
return 0;
@@ -3578,7 +3581,7 @@ int __init early_serial_setup(struct uart_port *port)
{
struct uart_port *p;

- if (port->line >= ARRAY_SIZE(serial8250_ports))
+ if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0)
return -ENODEV;

serial8250_isa_init_ports();
@@ -3945,6 +3948,9 @@ static int __init serial8250_init(void)
{
int ret;

+ if (nr_uarts == 0)
+ return -ENODEV;
+
serial8250_isa_init_ports();

printk(KERN_INFO "Serial: 8250/16550 driver, "
--
2.1.4

\
 
 \ /
  Last update: 2015-05-05 08:41    [W:0.047 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site