Messages in this thread Patch in this message | | | Date | Mon, 4 May 2015 14:51:46 +0200 | From | Maxime Ripard <> | Subject | Re: [PATCH v2 2/5] clk: sunxi: support the cpus (cpu special) clock on the Allwinner A80 |
| |
Hi,
On Fri, May 01, 2015 at 12:10:03AM +0800, Chen-Yu Tsai wrote: > The "cpus" clock is the clock for the embedded processor in the A80. > It is also part of the PRCM clock tree. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > Documentation/devicetree/bindings/clock/sunxi.txt | 1 + > drivers/clk/sunxi/Makefile | 2 +- > drivers/clk/sunxi/clk-sun9i-cpus.c | 243 ++++++++++++++++++++++ > 3 files changed, 245 insertions(+), 1 deletion(-) > create mode 100644 drivers/clk/sunxi/clk-sun9i-cpus.c > > diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt > index 2015b2beb957..c52735b0b924 100644 > --- a/Documentation/devicetree/bindings/clock/sunxi.txt > +++ b/Documentation/devicetree/bindings/clock/sunxi.txt > @@ -27,6 +27,7 @@ Required properties: > "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s > "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20 > "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31 > + "allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80 > "allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31 > "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31 > "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23 > diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile > index 058f273d6154..f0f33131b048 100644 > --- a/drivers/clk/sunxi/Makefile > +++ b/drivers/clk/sunxi/Makefile > @@ -13,4 +13,4 @@ obj-y += clk-usb.o > > obj-$(CONFIG_MFD_SUN6I_PRCM) += \ > clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \ > - clk-sun8i-apb0.o > + clk-sun8i-apb0.o clk-sun9i-cpus.o
I'm really not sure about that option selection.
If you only select the A31, you will get drivers that won't be relevant at all here.
How about something like
ifeq ($(CONFIG_MFD_SUN6I_PRCM), y) obj-$(CONFIG_MACH_SUN6I) = .... obj-$(CONFIG_MACH_SUN8I) = .... obj-$(CONFIG_MACH_SUN9I) = .... endif
?
> diff --git a/drivers/clk/sunxi/clk-sun9i-cpus.c b/drivers/clk/sunxi/clk-sun9i-cpus.c > new file mode 100644 > index 000000000000..1ec61ccf8cbf > --- /dev/null > +++ b/drivers/clk/sunxi/clk-sun9i-cpus.c > @@ -0,0 +1,243 @@ > +/* > + * Copyright (C) 2015 Chen-Yu Tsai > + * > + * Chen-Yu Tsai <wens@csie.org> > + * > + * Allwinner A80 CPUS clock driver > + * > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > + > +static DEFINE_SPINLOCK(sun9i_a80_cpus_lock); > + > +/** > + * sun9i_a80_cpus_clk_setup() - Setup function for a80 cpus composite clk > + */ > + > +#define SUN9I_CPUS_MAX_PARENTS 4 > +#define SUN9I_CPUS_MUX_PARENT_PLL4 3 > +#define SUN9I_CPUS_MUX_SHIFT 16 > +/* un-shifted mask is what mux_clk expects */ > +#define SUN9I_CPUS_MUX_MASK 0x3 > +#define SUN9I_CPUS_MUX_GET_PARENT(reg) ((reg >> SUN9I_CPUS_MUX_SHIFT) & \ > + SUN9I_CPUS_MUX_MASK) > + > +#define SUN9I_CPUS_DIV_SHIFT 4 > +#define SUN9I_CPUS_DIV_MASK (0x3 << SUN9I_CPUS_DIV_SHIFT) > +#define SUN9I_CPUS_DIV_GET(reg) ((reg & SUN9I_CPUS_DIV_MASK) >> \ > + SUN9I_CPUS_DIV_SHIFT) > +#define SUN9I_CPUS_DIV_SET(reg, div) ((reg & ~SUN9I_CPUS_DIV_MASK) | \ > + (div << SUN9I_CPUS_DIV_SHIFT)) > +#define SUN9I_CPUS_PLL4_DIV_SHIFT 8 > +#define SUN9I_CPUS_PLL4_DIV_MASK (0x1f << SUN9I_CPUS_PLL4_DIV_SHIFT) You have some masks that are shifted, some that are not.
I don't really have a preference, but being consistent would be great.
(and you can use GENMASK to generate your masks).
> +#define SUN9I_CPUS_PLL4_DIV_GET(reg) ((reg & SUN9I_CPUS_PLL4_DIV_MASK) >> \ > + SUN9I_CPUS_PLL4_DIV_SHIFT) > +#define SUN9I_CPUS_PLL4_DIV_SET(reg, div) ((reg & ~SUN9I_CPUS_PLL4_DIV_MASK) | \ > + (div << SUN9I_CPUS_PLL4_DIV_SHIFT)) > + > +struct sun9i_a80_cpus_clk { > + struct clk_hw hw; > + void __iomem *reg; > +}; > + > +#define to_sun9i_a80_cpus_clk(_hw) container_of(_hw, struct sun9i_a80_cpus_clk, hw) > + > +static unsigned long sun9i_a80_cpus_clk_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate)
These lines above generate checkpatch warnings, please fix them.
> + struct sun9i_a80_cpus_clk *cpus = to_sun9i_a80_cpus_clk(hw); > + unsigned long rate; > + u32 reg; > + > + /* Fetch the register value */ > + reg = readl(cpus->reg); > + > + /* apply pre-divider first if parent is pll4 */ > + if (SUN9I_CPUS_MUX_GET_PARENT(reg) == SUN9I_CPUS_MUX_PARENT_PLL4) > + parent_rate /= SUN9I_CPUS_PLL4_DIV_GET(reg) + 1; > + > + /* clk divider */ > + rate = parent_rate / (SUN9I_CPUS_DIV_GET(reg) + 1); > + > + return rate; > +} > + > +static long sun9i_a80_cpus_clk_round(unsigned long rate, u8 *divp, u8 *pre_divp, > + u8 parent, unsigned long parent_rate) > +{ > + u8 div, pre_div = 1; > + > + /* > + * clock can only divide, so we will never be able to achieve > + * frequencies higher than the parent frequency > + */ > + if (parent_rate && rate > parent_rate) > + rate = parent_rate; > + > + div = DIV_ROUND_UP(parent_rate, rate); > + > + /* calculate pre-divider if parent is pll4 */ > + if (parent == SUN9I_CPUS_MUX_PARENT_PLL4 && div > 4) { > + /* pre-divider is 1 ~ 32 */ > + if (div < 32) { > + pre_div = div; > + div = 1; > + } else if (div < 64) { > + pre_div = DIV_ROUND_UP(div, 2); > + div = 2; > + } else if (div < 96) { > + pre_div = DIV_ROUND_UP(div, 3); > + div = 3; > + } else { > + pre_div = DIV_ROUND_UP(div, 4); > + div = 4; > + } > + } > + > + /* we were asked to pass back divider values */ > + if (divp) { > + *divp = div - 1; > + *pre_divp = pre_div - 1; > + } > + > + return parent_rate / pre_div / div; > +} > + > +static long sun9i_a80_cpus_clk_determine_rate(struct clk_hw *hw, > + unsigned long rate, > + unsigned long min_rate, > + unsigned long max_rate, > + unsigned long *best_parent_rate, > + struct clk_hw **best_parent_clk) > +{ > + struct clk *clk = hw->clk, *parent, *best_parent = NULL; > + int i, num_parents; > + unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0; > + > + /* find the parent that can help provide the fastest rate <= rate */ > + num_parents = __clk_get_num_parents(clk); > + for (i = 0; i < num_parents; i++) { > + parent = clk_get_parent_by_index(clk, i); > + if (!parent) > + continue; > + if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT) > + parent_rate = __clk_round_rate(parent, rate); > + else > + parent_rate = __clk_get_rate(parent); > + > + child_rate = sun9i_a80_cpus_clk_round(rate, NULL, NULL, i, > + parent_rate); > + > + if (child_rate <= rate && child_rate > best_child_rate) { > + best_parent = parent; > + best = parent_rate; > + best_child_rate = child_rate; > + } > + } > + > + if (best_parent) > + *best_parent_clk = __clk_get_hw(best_parent); > + *best_parent_rate = best; > + > + return best_child_rate; > +} > + > +static int sun9i_a80_cpus_clk_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct sun9i_a80_cpus_clk *cpus = to_sun9i_a80_cpus_clk(hw); > + unsigned long flags; > + u8 div, pre_div, parent; > + u32 reg; > + > + spin_lock_irqsave(&sun9i_a80_cpus_lock, flags); > + > + reg = readl(cpus->reg); > + > + /* need to know which parent is used to apply pre-divider */ > + parent = SUN9I_CPUS_MUX_GET_PARENT(reg); > + sun9i_a80_cpus_clk_round(rate, &div, &pre_div, parent, parent_rate); > + > + reg = SUN9I_CPUS_DIV_SET(reg, div); > + reg = SUN9I_CPUS_PLL4_DIV_SET(reg, pre_div); > + writel(reg, cpus->reg); > + > + spin_unlock_irqrestore(&sun9i_a80_cpus_lock, flags); > + > + return 0; > +} > + > +static const struct clk_ops sun9i_a80_cpus_clk_ops = { > + .determine_rate = sun9i_a80_cpus_clk_determine_rate, > + .recalc_rate = sun9i_a80_cpus_clk_recalc_rate, > + .set_rate = sun9i_a80_cpus_clk_set_rate, > +};
It all looks like you could use the factors clock for this.
The only thing that you seem to be using a custom clock for is the pre divider on one of the parent, but that's something that could be reused for other clocks (like the A10 pll6, or the A20 MBUS).
> + > +static int sun9i_a80_cpus_clk_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + const char *clk_name = np->name; > + const char *parents[SUN9I_CPUS_MAX_PARENTS]; > + struct resource *r; > + struct sun9i_a80_cpus_clk *cpus; > + struct clk_mux *mux; > + struct clk *clk; > + int i = 0; > + > + cpus = devm_kzalloc(&pdev->dev, sizeof(*cpus), GFP_KERNEL); > + if (!cpus) > + return -ENOMEM; > + > + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + cpus->reg = devm_ioremap_resource(&pdev->dev, r); > + if (IS_ERR(cpus->reg)) > + return PTR_ERR(cpus->reg); > + > + /* we have a mux, we will have >1 parents */ > + while (i < SUN9I_CPUS_MAX_PARENTS && > + (parents[i] = of_clk_get_parent_name(np, i)) != NULL) > + i++; > + > + of_property_read_string(np, "clock-output-names", &clk_name); > + > + mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL); > + if (!mux) > + return -ENOMEM; > + > + /* set up clock properties */ > + mux->reg = cpus->reg; > + mux->shift = SUN9I_CPUS_MUX_SHIFT; > + mux->mask = SUN9I_CPUS_MUX_MASK; > + mux->lock = &sun9i_a80_cpus_lock; > + > + clk = clk_register_composite(NULL, clk_name, parents, i, > + &mux->hw, &clk_mux_ops, > + &cpus->hw, &sun9i_a80_cpus_clk_ops, > + NULL, NULL, 0); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + > + return of_clk_add_provider(np, of_clk_src_simple_get, clk); > +} > + > +static const struct of_device_id sun9i_a80_cpus_clk_dt_ids[] = { > + { .compatible = "allwinner,sun9i-a80-cpus-clk" }, > + { /* sentinel */ } > +}; > + > +static struct platform_driver sun9i_a80_cpus_clk_driver = { > + .driver = { > + .name = "sun9i-a80-cpus-clk", > + .of_match_table = sun9i_a80_cpus_clk_dt_ids, > + }, > + .probe = sun9i_a80_cpus_clk_probe, > +}; > +module_platform_driver(sun9i_a80_cpus_clk_driver); > + > +MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>"); > +MODULE_DESCRIPTION("Allwinner A80 CPUS Clock Driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.1.4 >
Maxime
-- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com [unhandled content-type:application/pgp-signature] | |