lkml.org 
[lkml]   [2015]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subjectpl330 dma failure
Hello,

I was trying to read the SPI NOR flash and found that the pl330
controller dma mysteriously fails.

There is the problem that the 256 bytes of dma program buffer does not
suffice for the whole of 4M of the flash memory so all of it cannot be
possibly transferred in one go with the pl330 driver as is now.

However, the practical limit is much smaller. At 1MHz or 40MHz the
maximum transfer size that ever finishes is 64k. At 133MHz which is
the rated flash memory clock the maximum transfer size that finishes
is 128 bytes (only tried power of 2).

There is no obvious issue with the DMA program. 128k happens to be the
smallest size that requires that the burst instruction is repeated in
the cycle and also happens to be the smallest size that fails for any
speed I tried.

Is there some obvious fix or should I just give up on transferring
more than 64k and make the driver truncate any larger transfers?

Thanks

Michal

[ 60.726638] m25p80 spi1.0: from 0x00000000, len 65536
[ 60.726724] s3c64xx_spi_transfer_one 12d30000.spi spi1 spi1.0 xfer
bpw 8 speed 40000000
[ 60.726730] s3c64xx_spi_transfer_one 12d30000.spi spi1 spi1.0 not using dma
[ 60.726745] s3c64xx_spi_transfer_one 12d30000.spi spi1 spi1.0 xfer
bpw 8 speed 40000000
[ 60.726749] s3c64xx_spi_transfer_one 12d30000.spi spi1 spi1.0 using dma
[ 60.726759] bc041000: DMAMOV CCR 0x804200
[ 60.726765] bc041006: DMAMOV SAR 0x12d3001c
[ 60.726770] bc04100c: DMAMOV DAR 0x68010000
[ 60.726776] bc041012: DMALP_0 255
[ 60.726782] bc041014: DMALP_1 255
[ 60.726787] bc041016: DMAWFPS 4
[ 60.726792] bc041018: DMALDPS 4
[ 60.726797] bc04101a: DMASTA
[ 60.726802] bc04101b: DMAFLUSHP 4
[ 60.726808] bc04101d: DMALPENDA_1 bjmpto_7
[ 60.726813] bc04101f: DMALPENDA_0 bjmpto_b
[ 60.726819] bc041021: DMASEV 0
[ 60.726824] bc041023: DMAEND
[ 60.726836] wait_for_dma 12d30000.spi spi1 (null) waiting for 46ms
transferring 65536bytes@40000000Hz
[ 60.765700] wait_for_dma 12d30000.spi spi1 (null) waited 40 ms
[ 60.780206] m25p80 spi1.0: from 0x00000000, len 131072
[ 60.780291] s3c64xx_spi_transfer_one 12d30000.spi spi1 spi1.0 xfer
bpw 8 speed 40000000
[ 60.780297] s3c64xx_spi_transfer_one 12d30000.spi spi1 spi1.0 not using dma
[ 60.780312] s3c64xx_spi_transfer_one 12d30000.spi spi1 spi1.0 xfer
bpw 8 speed 40000000
[ 60.780316] s3c64xx_spi_transfer_one 12d30000.spi spi1 spi1.0 using dma
[ 60.780327] bc041000: DMAMOV CCR 0x804200
[ 60.780333] bc041006: DMAMOV SAR 0x12d3001c
[ 60.780338] bc04100c: DMAMOV DAR 0x68020000
[ 60.780344] bc041012: DMALP_0 255
[ 60.780349] bc041014: DMALP_1 255
[ 60.780355] bc041016: DMAWFPS 4
[ 60.780360] bc041018: DMALDPS 4
[ 60.780365] bc04101a: DMASTA
[ 60.780370] bc04101b: DMAFLUSHP 4
[ 60.780375] bc04101d: DMAWFPS 4
[ 60.780380] bc04101f: DMALDPS 4
[ 60.780385] bc041021: DMASTA
[ 60.780390] bc041022: DMAFLUSHP 4
[ 60.780395] bc041024: DMALPENDA_1 bjmpto_e
[ 60.780401] bc041026: DMALPENDA_0 bjmpto_12
[ 60.780406] bc041028: DMASEV 0
[ 60.780411] bc04102a: DMAEND
[ 60.780423] wait_for_dma 12d30000.spi spi1 (null) waiting for 72ms
transferring 131072bytes@40000000Hz
[ 60.903505] wait_for_dma 12d30000.spi spi1 (null) waited 125 ms
[ 60.903518] m25p80 spi1.0: I/O Error: rx-1 tx-0 res:rx-f tx-p len-131072
[ 60.903530] m25p80 spi1.0: SPI transfer failed: -5
[ 60.903590] spi_master spi1: failed to transfer one message from queue


\
 
 \ /
  Last update: 2015-05-30 22:01    [W:0.052 / U:4.440 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site