lkml.org 
[lkml]   [2015]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] psmouse - focaltech report finger width to userspace
On Sat, May 30, 2015 at 02:00:59AM +0300, Dmitry Tunin wrote:
> Focaltech touchpads report finger width in packet[5] of absolute packet.
> Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0.
> 0xff is reported, when a large contact area is detected.
> This can be handled in userspace.
>
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>

Let's add a few people...

> ---
> drivers/input/mouse/focaltech.c | 20 +++++++++++++++++---
> 1 file changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c
> index 23d2594..0c3b698 100644
> --- a/drivers/input/mouse/focaltech.c
> +++ b/drivers/input/mouse/focaltech.c
> @@ -105,6 +105,16 @@ struct focaltech_hw_state {
>
> /* True if the clickpad has been pressed. */
> bool pressed;
> +
> + /*
> + * Finger width 0-7 and 15 for a very big contact area.
> + * 15 value stays until the finger is released.
> + * Width is reported only in absolute packets.
> + * Since hardware reports width only for last touching finger,
> + * there is no need to store width for every specific finger, so
> + * we keep only last value reported.
> + */
> + unsigned int width;
> };
>
> struct focaltech_data {
> @@ -112,7 +122,7 @@ struct focaltech_data {
> struct focaltech_hw_state state;
> };
>
> -static void focaltech_report_state(struct psmouse *psmouse)
> +static void focaltech_report_state(struct psmouse *psmouse, bool abs)
> {
> struct focaltech_data *priv = psmouse->private;
> struct focaltech_hw_state *state = &priv->state;
> @@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse *psmouse)
> input_report_abs(dev, ABS_MT_POSITION_X, clamped_x);
> input_report_abs(dev, ABS_MT_POSITION_Y,
> priv->y_max - clamped_y);
> + if (abs) input_report_abs(dev, ABS_TOOL_WIDTH, state->width);

I am not sure this condition and the change in focaltech_process_packet
are needed. The relative packets augment absolute one and we expect
width not change so we can always report state->width (either updated or
cached) and input core will drop dupes.

> }
> }
> input_mt_report_pointer_emulation(dev, true);
> @@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse,
>
> state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2];
> state->fingers[finger].y = (packet[3] << 8) | packet[4];
> + state->width = packet[5] >> 4;
> state->fingers[finger].valid = true;
> }
>
> @@ -228,22 +240,23 @@ static void focaltech_process_packet(struct psmouse *psmouse)
> switch (packet[0] & 0xf) {
> case FOC_TOUCH:
> focaltech_process_touch_packet(psmouse, packet);
> + focaltech_report_state(psmouse, false);
> break;
>
> case FOC_ABS:
> focaltech_process_abs_packet(psmouse, packet);
> + focaltech_report_state(psmouse, true);
> break;
>
> case FOC_REL:
> focaltech_process_rel_packet(psmouse, packet);
> + focaltech_report_state(psmouse, false);
> break;
>
> default:
> psmouse_err(psmouse, "Unknown packet type: %02x\n", packet[0]);
> break;
> }
> -
> - focaltech_report_state(psmouse);
> }
>
> static psmouse_ret_t focaltech_process_byte(struct psmouse *psmouse)
> @@ -331,6 +344,7 @@ static void focaltech_set_input_params(struct psmouse *psmouse)
> __set_bit(EV_ABS, dev->evbit);
> input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
> input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
> + input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
> input_mt_init_slots(dev, 5, INPUT_MT_POINTER);
> __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
> }
> --
> 1.9.1
>

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2015-05-30 02:21    [W:0.070 / U:9.512 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site