lkml.org 
[lkml]   [2015]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] mmc: sdhci-bcm2835: Actually enable the clock
Date
We're currently using a fixed frequency clock specified in the DT, so
enabling is a no-op. However, the RPi firmware-based clocks driver
can actually disable unused clocks, so when switching to use it we
ended up losing our MMC clock once all devices were probed.

Signed-off-by: Eric Anholt <eric@anholt.net>
---

v2: Re-disable our clock on sdhci_add_host() failure.

drivers/mmc/host/sdhci-bcm2835.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c
index 32f4046..1c65d46 100644
--- a/drivers/mmc/host/sdhci-bcm2835.c
+++ b/drivers/mmc/host/sdhci-bcm2835.c
@@ -172,12 +172,19 @@ static int bcm2835_sdhci_probe(struct platform_device *pdev)
ret = PTR_ERR(pltfm_host->clk);
goto err;
}
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable host clk\n");
+ goto err;
+ }

ret = sdhci_add_host(host);
if (ret)
- goto err;
+ goto err_clk;

return 0;
+err_clk:
+ clk_disable_unprepare(pltfm_host->clk);
err:
sdhci_pltfm_free(pdev);
return ret;
--
2.1.4


\
 
 \ /
  Last update: 2015-05-29 23:41    [W:0.050 / U:1.916 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site