lkml.org 
[lkml]   [2015]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] mmc: sdhci-bcm2835: Actually enable the clock
Date
Russell King - ARM Linux <linux@arm.linux.org.uk> writes:

> On Thu, May 28, 2015 at 05:03:12PM -0700, Eric Anholt wrote:
>> We're currently using a fixed frequency clock specified in the DT, so
>> enabling is a no-op. However, the RPi firmware-based clocks driver
>> can actually disable unused clocks, so when switching to use it we
>> ended up losing our MMC clock once all devices were probed.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> ---
>> drivers/mmc/host/sdhci-bcm2835.c | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c
>> index 0ef0343..09aff3a 100644
>> --- a/drivers/mmc/host/sdhci-bcm2835.c
>> +++ b/drivers/mmc/host/sdhci-bcm2835.c
>> @@ -172,6 +172,11 @@ static int bcm2835_sdhci_probe(struct platform_device *pdev)
>> ret = PTR_ERR(pltfm_host->clk);
>> goto err;
>> }
>> + ret = clk_prepare_enable(pltfm_host->clk);
>> + if (ret) {
>> + dev_err(&pdev->dev, "failed to enable host clk\n");
>> + goto err;
>> + }
>>
>> return sdhci_add_host(host);
>
> Where's the error clean-up path for a failed sdhci_add_host()?

We were already missing required cleanup in that path, so I didn't
notice. Sending a new version with a fix for that.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-05-29 23:41    [W:0.085 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site