lkml.org 
[lkml]   [2015]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 16/16] ARM: at91/dt: Add Acme Arietta G25
From
Great Alex

thanks

Sergio

On 29 May 2015 at 19:47, Alexandre Belloni
<alexandre.belloni@free-electrons.com> wrote:
> Add a minimum Device Tree for Acme Arietta G25.
> http://acme.systems/arietta
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> Cc: Sergio Tanzilli <tanzilli@acmesystems.it>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-acme-arietta.dts | 75 +++++++++++++++++++++++++++++++++
> 2 files changed, 76 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-acme-arietta.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8c3da289a00b..96a169e6ea56 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -31,6 +31,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
> at91sam9n12ek.dtb \
> at91sam9rlek.dtb \
> at91-ariag25.dtb \
> + at91-acme-arietta.dtb \
> at91-cosino_mega2560.dtb \
> at91-kizboxmini.dtb \
> at91sam9g15ek.dtb \
> diff --git a/arch/arm/boot/dts/at91-acme-arietta.dts b/arch/arm/boot/dts/at91-acme-arietta.dts
> new file mode 100644
> index 000000000000..142d588ad6bf
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-acme-arietta.dts
> @@ -0,0 +1,75 @@
> +/*
> + * Device Tree file for Arietta G25
> + * This device tree is minimal, to activate more peripherals, see:
> + * http://dts.acmesystems.it/arietta/
> + */
> +/dts-v1/;
> +#include "at91sam9g25.dtsi"
> +/ {
> + model = "Acme Systems Arietta G25";
> + compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
> + reg = <0x20000000 0x8000000>;
> + };
> +
> + clocks {
> + slow_xtal {
> + clock-frequency = <32768>;
> + };
> +
> + main_xtal {
> + clock-frequency = <12000000>;
> + };
> + };
> +
> + ahb {
> + apb {
> + mmc0: mmc@f0008000 {
> + pinctrl-0 = <
> + &pinctrl_mmc0_slot0_clk_cmd_dat0
> + &pinctrl_mmc0_slot0_dat1_3>;
> + status = "okay";
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <4>;
> + };
> + };
> +
> + usb2: gadget@f803c000 {
> + status = "okay";
> + };
> +
> + dbgu: serial@fffff200 {
> + status = "okay";
> + };
> +
> + rtc@fffffeb0 {
> + status = "okay";
> + };
> + };
> +
> + usb0: ohci@00600000 {
> + status = "okay";
> + num-ports = <3>;
> + };
> +
> + usb1: ehci@00700000 {
> + status = "okay";
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + arietta_led {
> + label = "arietta_led";
> + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> --
> 2.1.4
>



--
Sergio Tanzilli
tanzilli@acmesystems.it
Acme Systems srl
http://www.acmesystems.it


\
 
 \ /
  Last update: 2015-05-29 20:41    [W:0.073 / U:6.284 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site