lkml.org 
[lkml]   [2015]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/6] Marvell PXA1928 USB support
Date
This series adds USB PHYs and EHCI host drivers for the Marvell PXA1928
SOC.

The OTG block is based on ChipIdea and works with the "chipidea,usb2"
compatible driver as is just by adding the PHY driver. Yay! After more
testing it turns out the EHCI host is also based on ChipIdea too. So
this version uses the ChipIdea driver for both. A couple of fixes are
needed to make the ChipIdea driver work with the PXA1928 EHCI host.

Rob

v3:
- Clarify FSL only binding properties.
- Add owner field to phy_ops.
- Restructure split between PHY init/power_on and power_off/exit.
- Fix PHY error path handling.
- drop unrelated change in ci_hdrc_usb2.c.
- Add Peter's tested-by.

v2:
- Use ChipIdea driver for EHCI host, dropping the Marvell specific EHCI
driver
- Consolidate ChipIdea bindings to single common doc.
- rename phy driver files to phy-pxa-28nm-{usb2,hsic}.c
- Simplified work-around for HSIC phy/controller handshake.

Rob Herring (6):
dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
phy: Add Marvell USB 2.0 OTG 28nm PHY
phy: add Marvell HSIC 28nm PHY
dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
usb: chipidea: allow multiple instances to use default
ci_default_pdata
usb: chipidea: add work-around for Marvell HSIC PHY startup

.../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ++
.../devicetree/bindings/usb/ci-hdrc-imx.txt | 35 --
.../devicetree/bindings/usb/ci-hdrc-qcom.txt | 17 -
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 +-
.../devicetree/bindings/usb/ci-hdrc-zevio.txt | 17 -
drivers/phy/Kconfig | 20 ++
drivers/phy/Makefile | 2 +
drivers/phy/phy-pxa-28nm-hsic.c | 220 +++++++++++++
drivers/phy/phy-pxa-28nm-usb2.c | 355 +++++++++++++++++++++
drivers/usb/chipidea/ci_hdrc_usb2.c | 8 +-
drivers/usb/chipidea/host.c | 12 +
11 files changed, 653 insertions(+), 73 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
create mode 100644 drivers/phy/phy-pxa-28nm-hsic.c
create mode 100644 drivers/phy/phy-pxa-28nm-usb2.c

--
2.1.0



\
 
 \ /
  Last update: 2015-05-29 19:21    [W:0.063 / U:3.988 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site