lkml.org 
[lkml]   [2015]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH kernel v11 03/34] powerpc/powernv/ioda: Clean up IOMMU group registration
Date
The existing code has 3 calls to iommu_register_group() and
all 3 branches actually cover all possible cases.

This replaces 3 calls with one and moves the registration earlier;
the latter will make more sense when we add TCE table sharing.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 28 ++++++++--------------------
1 file changed, 8 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9a77f3c..8ca7abd 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1784,6 +1784,9 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
if (WARN_ON(pe->tce32_seg >= 0))
return;

+ tbl = pe->tce32_table;
+ iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
+
/* Grab a 32-bit TCE table */
pe->tce32_seg = base;
pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
@@ -1818,7 +1821,6 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
}

/* Setup linux iommu table */
- tbl = pe->tce32_table;
pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
base << 28, IOMMU_PAGE_SHIFT_4K);

@@ -1840,8 +1842,6 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
iommu_init_table(tbl, phb->hose->node);

if (pe->flags & PNV_IODA_PE_DEV) {
- iommu_register_group(tbl, phb->hose->global_number,
- pe->pe_number);
/*
* Setting table base here only for carrying iommu_group
* further down to let iommu_add_device() do the job.
@@ -1849,14 +1849,8 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
*/
set_iommu_table_base(&pe->pdev->dev, tbl);
iommu_add_device(&pe->pdev->dev);
- } else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
- iommu_register_group(tbl, phb->hose->global_number,
- pe->pe_number);
+ } else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
pnv_ioda_setup_bus_dma(pe, pe->pbus);
- } else if (pe->flags & PNV_IODA_PE_VF) {
- iommu_register_group(tbl, phb->hose->global_number,
- pe->pe_number);
- }

return;
fail:
@@ -1923,6 +1917,9 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
if (WARN_ON(pe->tce32_seg >= 0))
return;

+ tbl = pe->tce32_table;
+ iommu_register_group(tbl, phb->hose->global_number, pe->pe_number);
+
/* The PE will reserve all possible 32-bits space */
pe->tce32_seg = 0;
end = (1 << ilog2(phb->ioda.m32_pci_base));
@@ -1954,7 +1951,6 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
}

/* Setup linux iommu table */
- tbl = pe->tce32_table;
pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0,
IOMMU_PAGE_SHIFT_4K);

@@ -1974,8 +1970,6 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
iommu_init_table(tbl, phb->hose->node);

if (pe->flags & PNV_IODA_PE_DEV) {
- iommu_register_group(tbl, phb->hose->global_number,
- pe->pe_number);
/*
* Setting table base here only for carrying iommu_group
* further down to let iommu_add_device() do the job.
@@ -1983,14 +1977,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
*/
set_iommu_table_base(&pe->pdev->dev, tbl);
iommu_add_device(&pe->pdev->dev);
- } else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
- iommu_register_group(tbl, phb->hose->global_number,
- pe->pe_number);
+ } else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL))
pnv_ioda_setup_bus_dma(pe, pe->pbus);
- } else if (pe->flags & PNV_IODA_PE_VF) {
- iommu_register_group(tbl, phb->hose->global_number,
- pe->pe_number);
- }

/* Also create a bypass window */
if (!pnv_iommu_bypass_disabled)
--
2.4.0.rc3.8.gfb3e7d5


\
 
 \ /
  Last update: 2015-05-29 11:41    [W:0.156 / U:3.112 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site