lkml.org 
[lkml]   [2015]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv5 1/2] ARM: socfpga: support suspend to ram


On 5/28/15 4:19 PM, Alan Tull wrote:
> Add code that requests that the sdr controller go into
> self-refresh mode. This code is run from ocram.
>
> Suspend-to-RAM and EDAC support are mutually exclusive on
> SOCFPGA. If the EDAC is enabled, it will prevent the
> platform from going into suspend.
>
> Example of how to request to suspend to ram:
> $ echo enabled > \
> /sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup
>
> $ echo -n mem > /sys/power/state
>
> Signed-off-by: Alan Tull <atull@opensource.altera.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
> v2: use Generic on-chip SRAM driver to allocate ocram
> rm fncpy_align since generic allocator handles alignment
> check __arm_ioremap_exec return code
> check for NULL pointers
> add a comment regarding sdram controller configuration
> v3: fix renamed #define
> propagate socfpga_setup_ocram_self_refresh error code
> v4: Kconfig: don't need to select GENERIC_ALLOCATER
> add CONFIG_SOCFPGA_SUSPEND
> make s2r and EDAC support mutually exclusive
> socfpga.c: add sdr_ctl_base_addr
> return error if ocram not available in device tree
> update copyright years
> v5: remove compile time dependency
> edac driver will prevent suspend
> don't configure scu standby mode; done in enable_scu().
> fix comments about required sdram controller configuration
> ---
> arch/arm/mach-socfpga/Kconfig | 10 ++-
> arch/arm/mach-socfpga/Makefile | 1 +
> arch/arm/mach-socfpga/core.h | 6 +-
> arch/arm/mach-socfpga/pm.c | 149 ++++++++++++++++++++++++++++++++++
> arch/arm/mach-socfpga/self-refresh.S | 136 +++++++++++++++++++++++++++++++
> arch/arm/mach-socfpga/socfpga.c | 6 +-
> drivers/edac/altera_edac.c | 20 +++++
> 7 files changed, 325 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/mach-socfpga/pm.c
> create mode 100644 arch/arm/mach-socfpga/self-refresh.S
>

Which branch are you basing this patch on? I got a trivial patch
conflict in Kconfig when I applied to arm-soc/for-next and v4.1-rc5.

Also, I'm getting these sparse warnings:

arch/arm/mach-socfpga/pm.c:86:25: warning: incorrect type in argument 1
(different address spaces)
arch/arm/mach-socfpga/pm.c:86:25: expected void *<noident>
arch/arm/mach-socfpga/pm.c:86:25: got void [noderef]
<asn:2>*[assigned] suspend_ocram_base
arch/arm/mach-socfpga/pm.c:108:52: warning: cast removes address space
of expression

Dinh


\
 
 \ /
  Last update: 2015-05-29 05:21    [W:1.470 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site