lkml.org 
[lkml]   [2015]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/6] ARM: brcmstb: Add default gpio number
Date
Out of the brcmstb SoCs that I know, BCM3390 has the largest numbers
of GPIOs, with its
- 320 "peripheral" GPIOs
- 5*32 = 160 UPG GPIOs (counting unused lines, which do get counted)
- 2*32 = 64 UPG AON GPIOs (counting unused lines)
Total: 544

I suspect that the upper limit will only need to be higher in the
future, so set it to 1024.

Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
---
New in v2.

arch/arm/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e717642..bbe6bf7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1509,7 +1509,8 @@ config ARM_PSCI
# selected platforms.
config ARCH_NR_GPIO
int
- default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ
+ default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
+ ARCH_ZYNQ
default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
default 416 if ARCH_SUNXI
--
1.9.1


\
 
 \ /
  Last update: 2015-05-29 04:21    [W:0.135 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site