lkml.org 
[lkml]   [2015]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693
From
2015-05-27 22:50 GMT+09:00 Chanwoo Choi <cwchoi00@gmail.com>:
> On Sun, May 24, 2015 at 2:43 PM, Krzysztof Kozlowski
> <k.kozlowski.k@gmail.com> wrote:
>> Add MAX77843_MUIC prefix to some of the defines used in max77843 extcon
>> driver so the max77693-private.h can be included simultaneously with
>> max77843-private.h.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
>> Acked-by: Lee Jones <lee.jones@linaro.org>
>> ---
>> drivers/extcon/extcon-max77843.c | 49 +++++++----
>> include/linux/mfd/max77843-private.h | 154 +++++++++++++++++------------------
>> 2 files changed, 109 insertions(+), 94 deletions(-)
>>
>> diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
>> index 0f5910dcccb7..8a38d4acf026 100644
>> --- a/drivers/extcon/extcon-max77843.c
>> +++ b/drivers/extcon/extcon-max77843.c
>> @@ -206,11 +206,11 @@ static int max77843_muic_set_path(struct max77843_muic_info *info,
>> if (attached)
>> ctrl1 = val;
>> else
>> - ctrl1 = CONTROL1_SW_OPEN;
>> + ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
>>
>> ret = regmap_update_bits(max77843->regmap_muic,
>> MAX77843_MUIC_REG_CONTROL1,
>> - CONTROL1_COM_SW, ctrl1);
>> + MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
>> if (ret < 0) {
>> dev_err(info->dev, "Cannot switch MUIC port\n");
>> return ret;
>> @@ -244,7 +244,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
>>
>> adc = info->status[MAX77843_MUIC_STATUS1] &
>> MAX77843_MUIC_STATUS1_ADC_MASK;
>> - adc >>= STATUS1_ADC_SHIFT;
>> + adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT;
>>
>> switch (group) {
>> case MAX77843_CABLE_GROUP_ADC:
>> @@ -310,7 +310,7 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
>> /* Get VBVolt register bit */
>> gnd_type |= (info->status[MAX77843_MUIC_STATUS2] &
>> MAX77843_MUIC_STATUS2_VBVOLT_MASK);
>> - gnd_type >>= STATUS2_VBVOLT_SHIFT;
>> + gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT;
>>
>> /* Offset of GND cable */
>> gnd_type |= MAX77843_MUIC_GND_USB_HOST;
>> @@ -339,7 +339,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
>> switch (gnd_cable_type) {
>> case MAX77843_MUIC_GND_USB_HOST:
>> case MAX77843_MUIC_GND_USB_HOST_VB:
>> - ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
>> + ret = max77843_muic_set_path(info,
>> + MAX77843_MUIC_CONTROL1_SW_USB,
>> + attached);
>> if (ret < 0)
>> return ret;
>>
>> @@ -347,7 +349,9 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
>> break;
>> case MAX77843_MUIC_GND_MHL_VB:
>> case MAX77843_MUIC_GND_MHL:
>> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
>> + ret = max77843_muic_set_path(info,
>> + MAX77843_MUIC_CONTROL1_SW_OPEN,
>> + attached);
>> if (ret < 0)
>> return ret;
>>
>> @@ -366,7 +370,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
>> int cable_type, bool attached)
>> {
>> int ret;
>> - u8 path = CONTROL1_SW_OPEN;
>> + u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN;
>>
>> dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
>> attached ? "attached" : "detached", cable_type);
>> @@ -374,10 +378,10 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
>> switch (cable_type) {
>> case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
>> case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
>> - path = CONTROL1_SW_USB;
>> + path = MAX77843_MUIC_CONTROL1_SW_USB;
>> break;
>> case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
>> - path = CONTROL1_SW_UART;
>> + path = MAX77843_MUIC_CONTROL1_SW_UART;
>> break;
>> default:
>> return -EINVAL;
>> @@ -475,14 +479,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
>>
>> switch (chg_type) {
>> case MAX77843_MUIC_CHG_USB:
>> - ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
>> + ret = max77843_muic_set_path(info,
>> + MAX77843_MUIC_CONTROL1_SW_USB,
>> + attached);
>> if (ret < 0)
>> return ret;
>>
>> extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
>> break;
>> case MAX77843_MUIC_CHG_DOWNSTREAM:
>> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
>> + ret = max77843_muic_set_path(info,
>> + MAX77843_MUIC_CONTROL1_SW_OPEN,
>> + attached);
>> if (ret < 0)
>> return ret;
>>
>> @@ -490,14 +498,18 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
>> attached);
>> break;
>> case MAX77843_MUIC_CHG_DEDICATED:
>> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
>> + ret = max77843_muic_set_path(info,
>> + MAX77843_MUIC_CONTROL1_SW_OPEN,
>> + attached);
>> if (ret < 0)
>> return ret;
>>
>> extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
>> break;
>> case MAX77843_MUIC_CHG_SPECIAL_500MA:
>> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
>> + ret = max77843_muic_set_path(info,
>> + MAX77843_MUIC_CONTROL1_SW_OPEN,
>> + attached);
>> if (ret < 0)
>> return ret;
>>
>> @@ -505,7 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
>> attached);
>> break;
>> case MAX77843_MUIC_CHG_SPECIAL_1A:
>> - ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
>> + ret = max77843_muic_set_path(info,
>> + MAX77843_MUIC_CONTROL1_SW_OPEN,
>> + attached);
>> if (ret < 0)
>> return ret;
>>
>> @@ -529,7 +543,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
>> "failed to detect %s accessory (chg_type:0x%x)\n",
>> attached ? "attached" : "detached", chg_type);
>>
>> - max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
>> + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
>> + attached);
>> return -EINVAL;
>> }
>>
>> @@ -668,7 +683,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
>> ret = regmap_update_bits(max77843->regmap_muic,
>> MAX77843_MUIC_REG_CONTROL4,
>> MAX77843_MUIC_CONTROL4_ADCDBSET_MASK,
>> - time << CONTROL4_ADCDBSET_SHIFT);
>> + time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT);
>> if (ret < 0) {
>> dev_err(info->dev, "Cannot write MUIC regmap\n");
>> return ret;
>> @@ -769,7 +784,7 @@ static int max77843_muic_probe(struct platform_device *pdev)
>> max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
>>
>> /* Set initial path for UART */
>> - max77843_muic_set_path(info, CONTROL1_SW_UART, true);
>> + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
>>
>> /* Check revision number of MUIC device */
>> ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
>> diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
>> index 0121d9440340..c19303b0ccfd 100644
>> --- a/include/linux/mfd/max77843-private.h
>> +++ b/include/linux/mfd/max77843-private.h
>> @@ -318,62 +318,62 @@ enum max77843_irq_muic {
>> MAX77843_INTSRCMASK_SYS_MASK | MAX77843_INTSRCMASK_CHGR_MASK)
>>
>> /* MAX77843 STATUS register*/
>> -#define STATUS1_ADC_SHIFT 0
>> -#define STATUS1_ADCERROR_SHIFT 6
>> -#define STATUS1_ADC1K_SHIFT 7
>> -#define STATUS2_CHGTYP_SHIFT 0
>> -#define STATUS2_CHGDETRUN_SHIFT 3
>> -#define STATUS2_DCDTMR_SHIFT 4
>> -#define STATUS2_DXOVP_SHIFT 5
>> -#define STATUS2_VBVOLT_SHIFT 6
>> -#define STATUS3_VBADC_SHIFT 0
>> -#define STATUS3_VDNMON_SHIFT 4
>> -#define STATUS3_DNRES_SHIFT 5
>> -#define STATUS3_MPNACK_SHIFT 6
>> -
>> -#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
>> -#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(STATUS1_ADCERROR_SHIFT)
>> -#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(STATUS1_ADC1K_SHIFT)
>> -#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
>> -#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(STATUS2_CHGDETRUN_SHIFT)
>> -#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(STATUS2_DCDTMR_SHIFT)
>> -#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(STATUS2_DXOVP_SHIFT)
>> -#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(STATUS2_VBVOLT_SHIFT)
>> -#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << STATUS3_VBADC_SHIFT)
>> -#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(STATUS3_VDNMON_SHIFT)
>> -#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(STATUS3_DNRES_SHIFT)
>> -#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(STATUS3_MPNACK_SHIFT)
>> +#define MAX77843_MUIC_STATUS1_ADC_SHIFT 0
>> +#define MAX77843_MUIC_STATUS1_ADCERROR_SHIFT 6
>> +#define MAX77843_MUIC_STATUS1_ADC1K_SHIFT 7
>> +#define MAX77843_MUIC_STATUS2_CHGTYP_SHIFT 0
>> +#define MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT 3
>> +#define MAX77843_MUIC_STATUS2_DCDTMR_SHIFT 4
>> +#define MAX77843_MUIC_STATUS2_DXOVP_SHIFT 5
>> +#define MAX77843_MUIC_STATUS2_VBVOLT_SHIFT 6
>> +#define MAX77843_MUIC_STATUS3_VBADC_SHIFT 0
>> +#define MAX77843_MUIC_STATUS3_VDNMON_SHIFT 4
>> +#define MAX77843_MUIC_STATUS3_DNRES_SHIFT 5
>> +#define MAX77843_MUIC_STATUS3_MPNACK_SHIFT 6
>> +
>> +#define MAX77843_MUIC_STATUS1_ADC_MASK (0x1f << MAX77843_MUIC_STATUS1_ADC_SHIFT)
>> +#define MAX77843_MUIC_STATUS1_ADCERROR_MASK BIT(MAX77843_MUIC_STATUS1_ADCERROR_SHIFT)
>> +#define MAX77843_MUIC_STATUS1_ADC1K_MASK BIT(MAX77843_MUIC_STATUS1_ADC1K_SHIFT)
>> +#define MAX77843_MUIC_STATUS2_CHGTYP_MASK (0x7 << MAX77843_MUIC_STATUS2_CHGTYP_SHIFT)
>> +#define MAX77843_MUIC_STATUS2_CHGDETRUN_MASK BIT(MAX77843_MUIC_STATUS2_CHGDETRUN_SHIFT)
>> +#define MAX77843_MUIC_STATUS2_DCDTMR_MASK BIT(MAX77843_MUIC_STATUS2_DCDTMR_SHIFT)
>> +#define MAX77843_MUIC_STATUS2_DXOVP_MASK BIT(MAX77843_MUIC_STATUS2_DXOVP_SHIFT)
>> +#define MAX77843_MUIC_STATUS2_VBVOLT_MASK BIT(MAX77843_MUIC_STATUS2_VBVOLT_SHIFT)
>> +#define MAX77843_MUIC_STATUS3_VBADC_MASK (0xf << MAX77843_MUIC_STATUS3_VBADC_SHIFT)
>> +#define MAX77843_MUIC_STATUS3_VDNMON_MASK BIT(MAX77843_MUIC_STATUS3_VDNMON_SHIFT)
>> +#define MAX77843_MUIC_STATUS3_DNRES_MASK BIT(MAX77843_MUIC_STATUS3_DNRES_SHIFT)
>> +#define MAX77843_MUIC_STATUS3_MPNACK_MASK BIT(MAX77843_MUIC_STATUS3_MPNACK_SHIFT)
>>
>> /* MAX77843 CONTROL register */
>> -#define CONTROL1_COMP1SW_SHIFT 0
>> -#define CONTROL1_COMP2SW_SHIFT 3
>> -#define CONTROL1_IDBEN_SHIFT 7
>> -#define CONTROL2_LOWPWR_SHIFT 0
>> -#define CONTROL2_ADCEN_SHIFT 1
>> -#define CONTROL2_CPEN_SHIFT 2
>> -#define CONTROL2_ACC_DET_SHIFT 5
>> -#define CONTROL2_USBCPINT_SHIFT 6
>> -#define CONTROL2_RCPS_SHIFT 7
>> -#define CONTROL3_JIGSET_SHIFT 0
>> -#define CONTROL4_ADCDBSET_SHIFT 0
>> -#define CONTROL4_USBAUTO_SHIFT 4
>> -#define CONTROL4_FCTAUTO_SHIFT 5
>> -#define CONTROL4_ADCMODE_SHIFT 6
>> -
>> -#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << CONTROL1_COMP1SW_SHIFT)
>> -#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << CONTROL1_COMP2SW_SHIFT)
>> -#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(CONTROL1_IDBEN_SHIFT)
>> -#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(CONTROL2_LOWPWR_SHIFT)
>> -#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(CONTROL2_ADCEN_SHIFT)
>> -#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(CONTROL2_CPEN_SHIFT)
>> -#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(CONTROL2_ACC_DET_SHIFT)
>> -#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(CONTROL2_USBCPINT_SHIFT)
>> -#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(CONTROL2_RCPS_SHIFT)
>> -#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT)
>> -#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << CONTROL4_ADCDBSET_SHIFT)
>> -#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(CONTROL4_USBAUTO_SHIFT)
>> -#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(CONTROL4_FCTAUTO_SHIFT)
>> -#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << CONTROL4_ADCMODE_SHIFT)
>> +#define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT 0
>> +#define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT 3
>> +#define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT 7
>> +#define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT 0
>> +#define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT 1
>> +#define MAX77843_MUIC_CONTROL2_CPEN_SHIFT 2
>> +#define MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT 5
>> +#define MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT 6
>> +#define MAX77843_MUIC_CONTROL2_RCPS_SHIFT 7
>> +#define MAX77843_MUIC_CONTROL3_JIGSET_SHIFT 0
>> +#define MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT 0
>> +#define MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT 4
>> +#define MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT 5
>> +#define MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT 6
>> +
>> +#define MAX77843_MUIC_CONTROL1_COMP1SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT)
>> +#define MAX77843_MUIC_CONTROL1_COMP2SW_MASK (0x7 << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT)
>> +#define MAX77843_MUIC_CONTROL1_IDBEN_MASK BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT)
>> +#define MAX77843_MUIC_CONTROL2_LOWPWR_MASK BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT)
>> +#define MAX77843_MUIC_CONTROL2_ADCEN_MASK BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT)
>> +#define MAX77843_MUIC_CONTROL2_CPEN_MASK BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT)
>> +#define MAX77843_MUIC_CONTROL2_ACC_DET_MASK BIT(MAX77843_MUIC_CONTROL2_ACC_DET_SHIFT)
>> +#define MAX77843_MUIC_CONTROL2_USBCPINT_MASK BIT(MAX77843_MUIC_CONTROL2_USBCPINT_SHIFT)
>> +#define MAX77843_MUIC_CONTROL2_RCPS_MASK BIT(MAX77843_MUIC_CONTROL2_RCPS_SHIFT)
>> +#define MAX77843_MUIC_CONTROL3_JIGSET_MASK (0x3 << MAX77843_MUIC_CONTROL3_JIGSET_SHIFT)
>> +#define MAX77843_MUIC_CONTROL4_ADCDBSET_MASK (0x3 << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT)
>> +#define MAX77843_MUIC_CONTROL4_USBAUTO_MASK BIT(MAX77843_MUIC_CONTROL4_USBAUTO_SHIFT)
>> +#define MAX77843_MUIC_CONTROL4_FCTAUTO_MASK BIT(MAX77843_MUIC_CONTROL4_FCTAUTO_SHIFT)
>> +#define MAX77843_MUIC_CONTROL4_ADCMODE_MASK (0x3 << MAX77843_MUIC_CONTROL4_ADCMODE_SHIFT)
>>
>> /* MAX77843 switch port */
>> #define COM_OPEN 0
>> @@ -383,38 +383,38 @@ enum max77843_irq_muic {
>> #define COM_AUX_USB 4
>> #define COM_AUX_UART 5
>>
>> -#define CONTROL1_COM_SW \
>> +#define MAX77843_MUIC_CONTROL1_COM_SW \
>> ((MAX77843_MUIC_CONTROL1_COMP1SW_MASK | \
>> MAX77843_MUIC_CONTROL1_COMP2SW_MASK))
>>
>> -#define CONTROL1_SW_OPEN \
>> - ((COM_OPEN << CONTROL1_COMP1SW_SHIFT | \
>> - COM_OPEN << CONTROL1_COMP2SW_SHIFT))
>> -#define CONTROL1_SW_USB \
>> - ((COM_USB << CONTROL1_COMP1SW_SHIFT | \
>> - COM_USB << CONTROL1_COMP2SW_SHIFT))
>> -#define CONTROL1_SW_AUDIO \
>> - ((COM_AUDIO << CONTROL1_COMP1SW_SHIFT | \
>> - COM_AUDIO << CONTROL1_COMP2SW_SHIFT))
>> -#define CONTROL1_SW_UART \
>> - ((COM_UART << CONTROL1_COMP1SW_SHIFT | \
>> - COM_UART << CONTROL1_COMP2SW_SHIFT))
>> -#define CONTROL1_SW_AUX_USB \
>> - ((COM_AUX_USB << CONTROL1_COMP1SW_SHIFT | \
>> - COM_AUX_USB << CONTROL1_COMP2SW_SHIFT))
>> -#define CONTROL1_SW_AUX_UART \
>> - ((COM_AUX_UART << CONTROL1_COMP1SW_SHIFT | \
>> - COM_AUX_UART << CONTROL1_COMP2SW_SHIFT))
>> +#define MAX77843_MUIC_CONTROL1_SW_OPEN \
>> + ((COM_OPEN << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
>> + COM_OPEN << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
>> +#define MAX77843_MUIC_CONTROL1_SW_USB \
>> + ((COM_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
>> + COM_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
>> +#define MAX77843_MUIC_CONTROL1_SW_AUDIO \
>> + ((COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
>> + COM_AUDIO << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
>> +#define MAX77843_MUIC_CONTROL1_SW_UART \
>> + ((COM_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
>> + COM_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
>> +#define MAX77843_MUIC_CONTROL1_SW_AUX_USB \
>> + ((COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
>> + COM_AUX_USB << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
>> +#define MAX77843_MUIC_CONTROL1_SW_AUX_UART \
>> + ((COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT | \
>> + COM_AUX_UART << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT))
>
> You add "MAX77843_MUIC_" prefix but, I think that "MUIC_" prefix is
> not necessary.
> You don't add the "MUIC_" prefix on similar patch6.

The MAX77843_MUIC_ prefix is already used in that file, e.g.:
MAX77843_MUIC_STATUS1_ADC_MASK

Adding only "MAX77843_" makes sense but it would make the file
inconsistent. Do you want me to add such inconsistent MAX77843_
prefix?

Best regards,
Krzysztof

>
> If you remove the "MUIC_" prefix, looks good to me about this patch.
> Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> Thanks,
> Chanwoo Choi


\
 
 \ /
  Last update: 2015-05-28 02:01    [W:0.097 / U:9.304 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site