lkml.org 
[lkml]   [2015]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] net: tcp: Fix a PTO timing granularity issue
Hi Eric,

On Wed, May 27, 2015 at 07:56:25AM -0700, Eric Dumazet wrote:
> On Wed, 2015-05-27 at 10:40 -0400, Ido Yariv wrote:
>
> > HZ=100 is used on some embedded platforms, so it's still something we
> > have to deal with unfortunately..
> >
> > Since the '2' here is a lower bound, and msecs_to_jiffies(10) will
> > return values greater than 2 for HZ>100 anyway, always ensuring the
> > 2 jiffies lower bound shouldn't impact the behavior when HZ=1000.
> >
> > However, as far as I can tell, comparing msecs_to_jiffies(10) to 2, or
> > comparing the whole timeout to 2 doesn't make much difference, since
> > msecs_to_jiffies isn't inlined.
> >
> > In other words, keeping the #if shouldn't make much difference in behavior,
> > but will save the small comparison.
>
> Yes, I guess David point is to have a macro in include/linux/tcp.h so
> that we can have a nice comment, and not having #if ... in a C file.
>
> Maybe other timers in TCP need the same care (I am not asking you to
> find them, but having a macro would ease things perhaps)

Something along the lines of the patch below?

Thanks,
Ido.

From 562019884d1b2c7619ce3f49ecb595147d28bbdd Mon Sep 17 00:00:00 2001
From: Ido Yariv <ido@wizery.com>
Date: Thu, 21 May 2015 08:23:13 +0200
Subject: [PATCH v3] net: tcp: Fix a PTO timing granularity issue

The Tail Loss Probe RFC specifies that the PTO value should be set to
max(2 * SRTT, 10ms), where SRTT is the smoothed round-trip time.

The PTO value is converted to jiffies, so the timer may expire
prematurely.

This is especially problematic on systems in which HZ <= 100, so work
around this by setting the timeout to at least 2 jiffies on such
systems.

The 10ms figure was originally selected based on tests performed with
the current implementation and HZ = 1000. Thus, leave the behavior on
systems with HZ > 100 unchanged.

Signed-off-by: Ido Yariv <idox.yariv@intel.com>
---
include/net/tcp.h | 9 +++++++++
net/ipv4/tcp_output.c | 2 +-
2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index 2bb2bad..86090b6 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1751,4 +1751,13 @@ static inline void skb_set_tcp_pure_ack(struct sk_buff *skb)
skb->truesize = 2;
}

+/* Convert msecs to jiffies, ensuring that the return value is always at least
+ * 2. This can be used when setting tick-based timers to guarantee that they
+ * won't expire right away.
+ */
+static inline unsigned long tcp_safe_msecs_to_jiffies(const unsigned int m)
+{
+ return max_t(u32, 2, msecs_to_jiffies(m));
+}
+
#endif /* _TCP_H */
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 534e5fd..83021c5 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2207,7 +2207,7 @@ bool tcp_schedule_loss_probe(struct sock *sk)
if (tp->packets_out == 1)
timeout = max_t(u32, timeout,
(rtt + (rtt >> 1) + TCP_DELACK_MAX));
- timeout = max_t(u32, timeout, msecs_to_jiffies(10));
+ timeout = max_t(u32, timeout, tcp_safe_msecs_to_jiffies(10));

/* If RTO is shorter, just schedule TLP in its place. */
tlp_time_stamp = tcp_time_stamp + timeout;
--
2.1.0


\
 
 \ /
  Last update: 2015-05-27 17:41    [W:0.072 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site