lkml.org 
[lkml]   [2015]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] extcon: Inform the state of both ID and VBUS pin for USB
Date
Previously, I discussed how to inform the changed state of both ID
and VBUS pin for USB connector on patch-set[1].
[1] https://lkml.org/lkml/2015/4/2/310

So, this patch adds the extcon_set_cable_line_state() function to inform
the additional state of external connectors without additional register/
unregister functions. This function uses the existing notifier chain
which is registered by extcon_register_notifier() / extcon_register_interest().

The extcon_set_cable_line_state() can inform the new state of both
ID and VBUS pin state through extcon_set_cable_line_state().

For exmaple:
- On extcon-usb-gpio.c as extcon provider driver as following:
static void usb_extcon_detect_cable(struct work_struct *work)
{
...
/* check ID and update cable state */
id = gpiod_get_value_cansleep(info->id_gpiod);
if (id) {
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
extcon_set_cable_state_(info->edev, EXTCON_USB, true);

extcon_set_cable_line_state(info->edev, EXTCON_USB,
EXTCON_USB_ID_HIGH);
} else {
extcon_set_cable_state_(info->edev, EXTCON_USB, false);
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);

extcon_set_cable_line_state(info->edev, EXTCON_USB,
EXTCON_USB_ID_LOW);
}
}

- On specific extcon consumder driver as following:
static int xxx_probe(struct platform_device *pdev)
{
struct notifier_chain nh;

nb.notifier_call = extcon_usb_notifier;
ret = extcon_register_notifier(edev, EXTCON_USB, &nb);
...
}

static int extcon_usb_notifier(struct notifier_block *self,
unsigned long event, void *ptr)
{
switch (event) {
case EXTCON_DETACHED:
printk("USB is detached\n");
break;
case EXTCON_ATTACHED:
printk("USB is attached\n");
break;

case EXTCON_USB_ID_LOW:
printk("USB's ID pin is low state\n");
break;
case EXTCON_USB_ID_HIGH:
printk("USB's ID pin is high state\n");
break;
case EXTCON_USB_VBUS_LOW:
printk("USB's VBUS pin is high state\n");
break;
case EXTCON_USB_VBUS_HIGH:
printk("USB's VBUS pin is high state\n");
break;
default:
return -EINVAL;
};
}

Changes from v1:
- Use dev_warn() instead of dev_info() if set the same extcon_line_state value.

Chanwoo Choi (2):
extcon: Add extcon_set_cable_line_state() to inform the additional state of external connectors
extcon: usb-gpio: Update the ID pin state of USB when cable state is changed

drivers/extcon/extcon-usb-gpio.c | 6 ++++
drivers/extcon/extcon.c | 74 +++++++++++++++++++++++++++++++++++++++-
include/linux/extcon.h | 24 +++++++++++++
3 files changed, 103 insertions(+), 1 deletion(-)

--
2.2.0.GIT



\
 
 \ /
  Last update: 2015-05-27 14:41    [W:0.215 / U:8.704 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site