lkml.org 
[lkml]   [2015]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] gpiolib: debugfs: display gpios requested as irq only
On Thu, May 21, 2015 at 11:33:01PM +0300, Grygorii.Strashko@linaro.org wrote:
> On 05/21/2015 05:25 PM, Johan Hovold wrote:
> > On Tue, May 19, 2015 at 04:28:55PM +0200, Linus Walleij wrote:

> >> I introduced the gpiochip_[un]lock_as_irq() calls so we
> >> could safeguard against this. Notably that blocks client A
> >> from setting the line as output. I hope.
> >
> > A problem with the current implementation is that it uses as a flag
> > rather than a refcount. As I pointed out elsewhere in this thread, it is
> > possible to request a shared IRQ (e.g. via the sysfs interface) and
> > release it, thereby making it possible to change the direction of the
> > pin while still in use for irq.
>
> Yes (checked). And this is an issue which need to be fixed.
> - gpio sysfs should not call gpiochip_un/lock_as_irq()

This is a known but unrelated issue. The lock/unlock call in the sysfs
implementation is at worst redundant. I suggested removing it earlier,
but Linus pointed out that there were still a few drivers not
implementing the irq resource callbacks that need to be updated first.

> - gpio drivers should use gpiochip API or implement
> .irq_release/request_resources() callbacks
>
> in this case case IRQ core will do just what is required. Right?

No, the problem is that the "lock" is implemented using a flag rather
than a refcount.

> >> I thought this would mean the line would only be used as IRQ
> >> in this case, so I could block any gpiod_get() calls to that
> >> line but *of course* some driver is using the IRQ and snooping
> >> into the GPIO value at the same time. So can't simplify things
> >> like so either.
> >>
> >> Maybe I'm smashing open doors here...
> >
> > No, I understand that use case. But there are some issues with how it's
> > currently implemented. Besides the example above, nothing pins a gpio
> > chip driver in memory unless it has requested gpios, specifically,
> > requesting a pin for irq use is not enough.
>
> ok. An issue. Possible fix below:
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index ea11706..64392ad 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -514,6 +514,9 @@ static int gpiochip_irq_reqres(struct irq_data *d)
> {
> struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
>
> + if (!try_module_get(chip->owner))
> + return -ENODEV;
> +
> if (gpiochip_lock_as_irq(chip, d->hwirq)) {
> chip_err(chip,
> "unable to lock HW IRQ %lu for IRQ\n",
> @@ -528,6 +531,7 @@ static void gpiochip_irq_relres(struct irq_data *d)
> struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
>
> gpiochip_unlock_as_irq(chip, d->hwirq);
> + module_put(chip->owner);
> }

The resource callbacks would be the place to do resource allocation, but
the above snippet is obviously broken as its leaking resources in the
error path.

> >> Anyway to get back to the original statement:
> >>
> >>> This is backwards. All gpios *should* be requested. *If* we are to
> >>> include not-requested gpios in the debug output, then it is those pins
> >>> that need to be marked as not-requested.
> >>
> >> This is correct, all GPIOs accessed *as gpios* should be
> >> requested, no matter if they are then cast to IRQs by gpiod_to_irq
> >> or not. However if the same hardware is used as only "some IRQ"
> >> through it's irqchip interface, it needs not be requested, but
> >> that is by definition not a GPIO, it is an IRQ.
> >
> > True. And since it is not a GPIO, should it show up in
> > /sys/kernel/debug/gpio? ;)
>
> "Nice" idea :)
> This information needed for debugging and testing which includes
> checking of pin state (hi/lo) - especially useful during board's
> bring-up when a lot of mistakes are detected related to wrong usage
> of IRQ/GPIO numbers.

At least the gpio-irq mapping for requested gpios could be useful.

Another issue here is that you would start calling gpio accessors for
unrequested gpios. Are you sure all gpio drivers can, and will always be
able to, handle that? [ When using the gpiod interface, gpios will always
be requested and must not be accessed after having been released. ]

Johan


\
 
 \ /
  Last update: 2015-05-24 19:21    [W:0.093 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site