lkml.org 
[lkml]   [2015]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH soc] ARM: use ARM_SINGLE_ARMV7M for ARMv7-M platforms
Date
On Thursday 21 May 2015 00:35:44 Stefan Agner wrote:
> Use the new config symbol ARM_SINGLE_ARMV7M which groups config
> symbols used by modern ARMv7-M platforms. This allows supporting
> multiple ARMv7-M platforms in one kernel image. However, a common
> kernel image requires the combined platforms to share the same
> main memory layout to be bootable.
>
> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> Since this is essentially only a shift of config symbols, it
> should not change runtime behavior, at least when selecting
> only one platform.
>
> Uwe, this is essentially the same I had in my patchset, just
> converting the other platforms too. I was bold and added your
> Ack anyway...
>
> Joachim, Maxime, I test compiled with your defconfigs, compiled
> fine on my machine.

I've applied the patch now with all three Acks added (and reordered
with regard to the Signed-off-by).

Thanks!

[one small request as I have four armv7-m folks on Cc already:
could one of you try to fix the warning that I get with every
single build: "/git/arm-soc/arch/arm/kernel/head-nommu.S: Assembler
messages: /git/arm-soc/arch/arm/kernel/head-nommu.S:167: Warning:
Use of r13 as a source register is deprecated when r15 is the
destination register."]

Arnd


\
 
 \ /
  Last update: 2015-05-22 17:21    [W:0.125 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site