lkml.org 
[lkml]   [2015]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/msm/mdp5: Always generate active-high sync signals for DSI
Date
DSI video mode engine can only take active-high sync signals. This
change prevents MDP5 sending active-low sync signals to DSI in any
case.

Signed-off-by: Hai Li <hali@codeaurora.org>
---
drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c
index 53bb1f7..2e98ce0 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c
@@ -144,10 +144,14 @@ static void mdp5_encoder_mode_set(struct drm_encoder *encoder,
mode->type, mode->flags);

ctrl_pol = 0;
- if (mode->flags & DRM_MODE_FLAG_NHSYNC)
- ctrl_pol |= MDP5_INTF_POLARITY_CTL_HSYNC_LOW;
- if (mode->flags & DRM_MODE_FLAG_NVSYNC)
- ctrl_pol |= MDP5_INTF_POLARITY_CTL_VSYNC_LOW;
+
+ /* DSI controller cannot handle active-low sync signals. */
+ if (mdp5_encoder->intf.type != INTF_DSI) {
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ ctrl_pol |= MDP5_INTF_POLARITY_CTL_HSYNC_LOW;
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ ctrl_pol |= MDP5_INTF_POLARITY_CTL_VSYNC_LOW;
+ }
/* probably need to get DATA_EN polarity from panel.. */

dtv_hsync_skew = 0; /* get this from panel? */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation


\
 
 \ /
  Last update: 2015-05-22 16:41    [W:0.033 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site