Messages in this thread | | | Date | Wed, 20 May 2015 16:06:31 +0200 | From | Antoine Tenart <> | Subject | Re: [PATCH v5 07/12] mtd: nand: add Samsung K9GBG08U0A-M to nand_ids table |
| |
On Sat, May 16, 2015 at 03:57:00PM -0300, Ezequiel Garcia wrote: > On 05/11/2015 11:58 AM, Antoine Tenart wrote: > > Add the full description of the Samsung K9GBG08U0A-M nand chip in the > > nand_ids table. > > > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> > > --- > > drivers/mtd/nand/nand_ids.c | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c > > index dd620c19c619..500c33e1db06 100644 > > --- a/drivers/mtd/nand/nand_ids.c > > +++ b/drivers/mtd/nand/nand_ids.c > > @@ -50,6 +50,10 @@ struct nand_flash_dev nand_flash_ids[] = { > > { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, > > SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), > > 4 }, > > + {"NAND 4GiB 3,3V 8-bit", > > + { .id = {0xec, 0xd7, 0x94, 0x76, 0x64, 0x43}, }, > > + 8192, 4096, SZ_1M, LP_OPTIONS, 0, 0, NAND_ECC_INFO(40, SZ_1K), > > You should stick to SZ_8K and SZ_4K here.
Right.
> > > + 4 }, > > > > LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), > > LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), > > > > I found a datasheet here for K9GBG08U0A that claims to support JEDEC > device identification (i.e. 0x90 0x40 and 0xEC 0x40 commands). Have you > tested it? Any reason you are adding full ID instead?
This nand looks like another one defined in this file, so a full ID make sure the right parameters applies here.
Antoine
-- Antoine Ténart, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
| |