lkml.org 
[lkml]   [2015]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/3] irqchip: GIC: Add support for irq_{get,set}_irqchip_state
On Tue, 19 May 2015 22:45:26 +0100
Feng Kan <fkan@apm.com> wrote:

> On Tue, May 19, 2015 at 3:01 AM, Marc Zyngier <marc.zyngier@arm.com> wrote:
> > On Tue, 19 May 2015 09:40:21 +0100
> > Linus Walleij <linus.walleij@linaro.org> wrote:
> >
> >> On Thu, May 14, 2015 at 10:14 PM, Feng Kan <fkan@apm.com> wrote:
> >> > On Thu, May 14, 2015 at 3:32 AM, Linus Walleij <linus.walleij@linaro.org> wrote:
> >>
> >> >> But surely the GPIO block has its own status register, so are
> >> >> you saying that this register is unreliable?
> >> >
> >> > When the GPIO is used as interrupt, the gpio block does not report the
> >> > status anymore. Which leaves us stuck with SPISR.
> >> >>
> >> >> I can think of a few reasons, like transient IRQs etc but
> >> >> what is actually causing this?
> >> >
> >> > I won't say the obvious.
> >>
> >> Yeah I see your problem now :(
> >>
> >> I think it's better to fix the access functions so that you can
> >> cross-call to the GIC driver to get the SPISR flag out though.
> >> Let's see what Marc says.
> >>
> >> >> Which GPIO driver is this? Is it upstream?
> >> >
> >> > Yes, it is upstream. It is the xgene slimpro gpio driver. I am starting to
> >> > think that we ought to switch to use some gpio poll driver rather than
> >> > using gpio-key.
> >>
> >> There is both gpio_keys_polled and IRQ-driven gpio_keys so yeah
> >> that's possible. But honestly I think it's better to deal with this
> >> problem for real because IRQ is more efficient.
> >>
> >> So the way I perceive it this is the real problem:
> >>
> >> +static int gic_irq_get_irqchip_state(struct irq_data *d,
> >> + enum irqchip_irq_state which, bool *val)
> >> +{
> >> + switch (which) {
> >> (...)
> >> + case IRQCHIP_STATE_ACTIVE:
> >> + *val = gic_peek_irq(d, GIC_DIST_ACTIVE_SET);
> >> + break; case: read
> >> from 0xd04 (SPISR) instead, because that makes more
> >> sense to me, or am I wrong at it?
> >>
> >> + case IRQCHIP_STATE_LINE_LEVEL:
> >> + *val = gic_peek_irq(d, GIC_DIST_SPISR);
> >> + break;
> >>
> >> And then put a define into <linux/irqchip/arm-gic.h> for
> >> GIC_DIST_SPISR.
> >
> > What worries me here is that the PENDING state should already give you
> > the right level of information (this is what the GIC-400 TRM says). The
> > only reason why SPISR exists is that software can write to the PENDING
> > register, while SPISR is RO.
> >
> > If reading the pending state doesn't work, then I'd like to know
> > exactly *why*. Only then we can add support for LINE_LEVEL using SPISR
> > (which has to be GIC-400 specific, as it is not architected).
>
> IS_PENDING and IS_ACTIVE works fine for the ISR context. However,
> the nature of the register is meant for IRQ handling and not to read
> the status of a GPIO. By the time the gpio_key throws a work queue
> and check the status of the PENDING register, it is no long relevant.

This is far more subtle that that. Assuming a level-triggered
interrupt, the PENDING state is completely independent of the state of
the interrupt (see the GIC state machine), and will accurately reflect
the input line (an edge-triggered interrupt is of course a different
matter). As outlined in the GIC-400 TRM, both GICD_ICPENDINGRn,
GICD_ISPENDINGRn and GICD_SPISRn are providing the same information
(the only difference being that SPISRn is offering a RO view before the
latches).

SPISRn is essentially a debug register, not something that is meant to
be used in normal code, GPIO or otherwise. So assuming we have an
actual GIC-400 implementation here, I want to know why this isn't
working, and you are in a position to tell me (I assume you can talk to
the HW people that did the integration).

Thanks,

M.
--
Without deviation from the norm, progress is not possible.


\
 
 \ /
  Last update: 2015-05-20 10:21    [W:2.581 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site