lkml.org 
[lkml]   [2015]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3 2/4] clk: socfpga: add a clock driver for the Arria 10 platform
On 05/19/15 16:12, Dinh Nguyen wrote:
>
> On 5/19/15 4:50 PM, Stephen Boyd wrote:
>> On 05/19/15 09:29, Dinh Nguyen wrote:
>>> On 5/15/15 7:52 PM, Stephen Boyd wrote:
>>>> On 05/07, dinguyen@opensource.altera.com wrote:
>>>>> +
>>>>> +static int socfpga_clk_prepare(struct clk_hw *hwclk)
>>>>> +{
>>>>> + struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
>>>>> + struct regmap *sys_mgr_base_addr;
>>>>> + int i;
>>>>> + u32 hs_timing;
>>>>> + u32 clk_phase[2];
>>>>> +
>>>>> + if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) {
>>>>> + sys_mgr_base_addr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
>>>>> + if (IS_ERR(sys_mgr_base_addr)) {
>>>> Is there a reason the syscon is grabbed lazily in prepare? Why
>>>> not get it before registering this clock?
>>> This syscon node is only associated with clocks that have a clk-phase
>>> property, which on the SoCFPGA platform, is the SD/MMC clocks. The way
>>> to implement this went through quite a few rounds of discussion for the
>>> Cyclone5/Arria5 platform before settling to this method.
>>>
>>> The reason why syscon is grabbed here is that the setting of the clock
>>> phase must be done before enabling of the clock, so it seem that prepare
>>> was a good place. Should this be move moved to the socfpga_gate_init()
>>> instead?
>> I was expecting the regmap to be found before the clock is registered
>> and stored away into the socfpga_gate_clk structure. Getting the regmap
>> during prepare is akin to ioremapping a register region during prepare,
>> which doesn't sound right at all. Maybe there's some good reason in the
>> earlier discussions? Any hints?
>>
> Ah okay, the earlier discussions revolve mainly around moving the regmap
> from the SD/MMC driver into the clock driver. But there weren't any
> issue raised for putting the regmap in the prepare function.
>
> If you're curious, here are the links to the discussion for adding the
> clk-phase to the driver:
>
> http://archive.arm.linux.org.uk/lurker/message/20131212.203042.d37c8ee9.en.html
>
> http://archive.arm.linux.org.uk/lurker/message/20140109.213116.1f13b27a.en.html
>
> But perhaps putting the regmap lookup in the init function is the
> correct way to do this?

Yes that would seem more appropriate. I suspect this lazy approach is
done because syscon isn't ready when of_clk_init() runs though. If this
was written to be a proper device driver with probe defer support this
wouldn't be a problem.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project



\
 
 \ /
  Last update: 2015-05-20 03:01    [W:2.501 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site