[lkml]   [2015]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRaspberry Pi DT clocks series
Here's a series to add a real clock provider on Raspberry Pi.
Previously, we've been using a mix of fixed clocks from clk-bcm2835.c
(though some of them failed to get used by their intended consumers),
and fixed-clock nodes in the DT.

This driver gives us the ability to enable/disable our clocks, and
also lets us get and set frequency values. This will let us build a
cpufreq driver (Andrea Merello has done some work on this front, and
has a couple of options available), and get correct frequencies on the
Raspberry Pi 2 without hardcoding new values.

This branch can be found at:

which also has a patch for the MMC clock which is not included yet due
to a bug in the sdhci driver. The series applies on top of
rpi-mailbox, whose code is currently out for review:

 \ /
  Last update: 2015-05-18 22:21    [W:0.242 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site