Messages in this thread Patch in this message | | | From | Antoine Tenart <> | Subject | [PATCH v5 2/3] Documentation: bindings: document the Berlin ADC driver | Date | Mon, 18 May 2015 11:19:19 +0200 |
| |
Following the addition of a Berlin ADC driver, this patch adds the corresponding bindings documentation.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Jonathan Cameron <jic23@kernel.org> --- .../devicetree/bindings/iio/adc/berlin2_adc.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt new file mode 100644 index 000000000000..908334c6b07f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt @@ -0,0 +1,19 @@ +* Berlin Analog to Digital Converter (ADC) + +The Berlin ADC has 8 channels, with one connected to a temperature sensor. +It is part of the system controller register set. The ADC node should be a +sub-node of the system controller node. + +Required properties: +- compatible: must be "marvell,berlin2-adc" +- interrupts: the interrupts for the ADC and the temperature sensor +- interrupt-names: should be "adc" and "tsen" + +Example: + +adc: adc { + compatible = "marvell,berlin2-adc"; + interrupt-parent = <&sic>; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; +}; -- 2.4.0
| |