lkml.org 
[lkml]   [2015]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/3] Documentation: bindings: document the Berlin ADC driver
On 11/05/15 11:18, Antoine Tenart wrote:
> Following the addition of a Berlin ADC driver, this patch adds the
> corresponding bindings documentation.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
> Acked-by: Jonathan Cameron <jic23@kernel.org>
This has been around in this form for a good while, so I'll take the
view everyone agrees it is a good binding and apply it.

Applied to the togreg branch of iio.git - initially pushed out as testing
so the autobuilders can play with the rest of the series.

Thanks,

Jonathan
> ---
> .../devicetree/bindings/iio/adc/berlin2_adc.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
> new file mode 100644
> index 000000000000..908334c6b07f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
> @@ -0,0 +1,19 @@
> +* Berlin Analog to Digital Converter (ADC)
> +
> +The Berlin ADC has 8 channels, with one connected to a temperature sensor.
> +It is part of the system controller register set. The ADC node should be a
> +sub-node of the system controller node.
> +
> +Required properties:
> +- compatible: must be "marvell,berlin2-adc"
> +- interrupts: the interrupts for the ADC and the temperature sensor
> +- interrupt-names: should be "adc" and "tsen"
> +
> +Example:
> +
> +adc: adc {
> + compatible = "marvell,berlin2-adc";
> + interrupt-parent = <&sic>;
> + interrupts = <12>, <14>;
> + interrupt-names = "adc", "tsen";
> +};
>



\
 
 \ /
  Last update: 2015-05-17 14:21    [W:0.060 / U:1.584 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site