lkml.org 
[lkml]   [2015]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] ARM: pci: add call to pcie_bus_configure_settings()
On Wed, May 28, 2014 at 01:14:53PM -0400, Murali Karicheri wrote:
> Call pcie_bus_configure_settings on ARM, like for other platforms.
> pcie_bus_configure_settings makes sure the MPS across the bus is
> uniform and provides the ability to tune the MRSS and MPS to higher
> performance values. This is particularly important for embedded where
> there is no firmware to program these PCI-E settings for the OS.
>
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
>
> CC: Russell King <linux@arm.linux.org.uk>
> CC: Bjorn Helgaas <bhelgaas@google.com>
> CC: Arnd Bergmann <arnd@arndb.de>
> CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
> - Fixed comments against initial version
> arch/arm/kernel/bios32.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
> index 16d43cd..17a26c1 100644
> --- a/arch/arm/kernel/bios32.c
> +++ b/arch/arm/kernel/bios32.c
> @@ -545,6 +545,18 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
> */
> pci_bus_add_devices(bus);
> }
> +
> + list_for_each_entry(sys, &head, node) {
> + struct pci_bus *bus = sys->bus;
> +
> + /* Configure PCI Express settings */
> + if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
> + struct pci_bus *child;
> +
> + list_for_each_entry(child, &bus->children, node)
> + pcie_bus_configure_settings(child);

This patch (8b5742ad156d ("ARM/PCI: Call pcie_bus_configure_settings() to
set MPS")) has been upstream since v3.16-rc1, but I think we goofed.

The MPS configuration should be done *before* pci_bus_add_devices(). After
pci_bus_add_devices(), drivers may be bound to devices, and the PCI core
shouldn't touch device configuration while a driver owns the device.

Looking at the code, it seems like it would have been simpler to do this in
the existing loop:

list_for_each_entry(sys, &head, node) {
struct pci_bus *bus = sys->bus;

if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}

pci_bus_add_devices(bus);
}

so maybe there's some reason I'm not aware of for not doing it that way?

> + }
> + }
> }
>
> #ifndef CONFIG_PCI_HOST_ITE8152
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2015-05-16 16:41    [W:0.093 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site