lkml.org 
[lkml]   [2015]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC 2/2] ARM: vf610: Add SoC bus support for Vybrid
Hi Sanchayan,

The implementation looks good from my perspective. While the output
differs a bit from what i.MX6 provides, I think its closer to what is
specified. Also I like that we have the ROM revision available, since
this information is relevant to identify early versions of the chip
which have had issues...

Some minor things below.

On 2015-05-11 07:11, Sanchayan Maity wrote:
> Implements SoC bus support to export SoC specific information. Read
> the unique SoC ID from the Vybrid On Chip One Time Programmable (OCOTP)
> controller, SoC specific information from the Miscellaneous System
> Control Module (MSCM), revision from the ROM revision register and
> expose it via the SoC bus infrastructure.
>
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> ---
> arch/arm/mach-imx/mach-vf610.c | 76 +++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 75 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
> index 1ba7738..74681f1 100644
> --- a/arch/arm/mach-imx/mach-vf610.c
> +++ b/arch/arm/mach-imx/mach-vf610.c
> @@ -9,13 +9,87 @@
>
> #include <linux/of_platform.h>
> #include <linux/irqchip.h>
> +#include <linux/slab.h>
> +#include <linux/sys_soc.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/random.h>
> +#include <linux/io.h>
> #include <asm/mach/arch.h>
> #include <asm/hardware/cache-l2x0.h>
> #include "common.h"
>
> +#define OCOTP_CFG0_OFFSET 0x00000410
> +#define OCOTP_CFG1_OFFSET 0x00000420
> +#define MSCM_CPxCOUNT_OFFSET 0x0000002C
> +#define MSCM_CPxCFG1_OFFSET 0x00000014
> +#define ROM_REVISION_REGISTER 0x00000080
> +
> static void __init vf610_init_machine(void)
> {
> - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> + struct regmap *ocotp_regmap, *mscm_regmap;
> + struct soc_device_attribute *soc_dev_attr;
> + struct device *parent = NULL;
> + struct soc_device *soc_dev;
> + char soc_type[] = "xx0";
> + void __iomem *rom_rev;
> + u32 cpxcount, cpxcfg1;
> + u32 soc_id1, soc_id2;
> + u64 soc_id;
> +
> + ocotp_regmap = syscon_regmap_lookup_by_compatible("fsl,vf610-ocotp");
> + if (IS_ERR(ocotp_regmap)) {
> + pr_err("regmap lookup for octop failed\n");
> + goto out;
> + }
> +
> + mscm_regmap = syscon_regmap_lookup_by_compatible("fsl,vf610-mscm-cpucfg");
> + if (IS_ERR(mscm_regmap)) {
> + pr_err("regmap lookup for mscm failed");
> + goto out;
> + }
> +
> + regmap_read(ocotp_regmap, OCOTP_CFG0_OFFSET, &soc_id1);
> + regmap_read(ocotp_regmap, OCOTP_CFG1_OFFSET, &soc_id2);
> +
> + soc_id = (u64) soc_id1 << 32 | soc_id2;
> + add_device_randomness(&soc_id, sizeof(soc_id));
> +
> + regmap_read(mscm_regmap, MSCM_CPxCOUNT_OFFSET, &cpxcount);
> + regmap_read(mscm_regmap, MSCM_CPxCFG1_OFFSET, &cpxcfg1);
> +
> + soc_type[0] = cpxcount ? '6' : '5'; /* Dual Core => VF6x0 */
> + soc_type[1] = cpxcfg1 ? '1' : '0'; /* L2 Cache => VFx10 */
> +
> + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> + if (!soc_dev_attr)
> + goto out;

This out seems not to take care of the memory allocated just above.

> +
> + soc_dev_attr->machine = kasprintf(GFP_KERNEL, "Freescale Vybrid");
> + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%llx", soc_id);

I would prefer %016llx as format, that shows that we have 64 bit
identifier even when the highest bit is 0.

> + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Freescale Vybrid VF%s",
> + soc_type);
> +
> + rom_rev = ioremap(ROM_REVISION_REGISTER, SZ_1);
> + if (rom_rev)
> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%08x",
> + readl(rom_rev));

We should add the ROM to the device tree too. The memory map documented
in the RM states that the ROM is accessable at 0x0000_0000-0x007fffff,
that would be 8MiB. However, according to the RM, the on-chip ROM is
only 96KiB. I quickly checked, U-Boot crashed when reading after
0x00018000, which is the 96KiB boundary, hence I would add a DT node
with compatible fsl,vf610-ocrom or something which has a register range
from 0x0-0x00017fff.

> +
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + if (!rom_rev)
> + kfree(soc_dev_attr->revision);
> + kfree(soc_dev_attr->family);
> + kfree(soc_dev_attr->soc_id);
> + kfree(soc_dev_attr->machine);
> + kfree(soc_dev_attr);
> + goto out;
> + }
> +
> + parent = soc_device_to_device(soc_dev);
> +
> +out:
> + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
> vf610_pm_init();
> }



\
 
 \ /
  Last update: 2015-05-14 18:21    [W:0.055 / U:117.136 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site